Optimization of animal manure vermicomposting based on biomass production of earthworms and higher plants

The goal of this study was to optimize the mixture of swine manure (SM) and cattle manure (CM) used in the vermicomposting process, seeking to increase the manure biodegradation rate and enhance the biomass production of both earthworms and higher plants. To achieve this goal, physico-chemical parameters were determined to assess the final compost quality after 50 days of vermicomposting. The different manure ratios used to produce the composts (C) were as follows (SM:CM, % m/m basis): C1 100:0, C2 (75:25), C3 (50:50), C4 (25:75), and C5 (0:100). In addition, the earthworm biomass and the phytoproductivity of lettuce (Lactuca sativa L.) plants grown in mixtures (1:1) of natural soil and the most viable vermicomposts were investigated. The C1 and C2 compost compositions were associated with high earthworm mortality rates. The C3 compost provided the highest mineral concentrations and C5 showed the highest lettuce yield (wet biomass). The results verify that stabilized cattle manure is an excellent substrate for the vermicomposting process and that fresh swine manure must be mixed with pre-stabilized cattle manure to ensure an optimized vermicomposting process, which must be controlled in terms of temperature and ammonia levels. It is concluded that small livestock farmers could add value to swine manure by applying the vermicomposting process, without the need for high investments and with a minimal requirement for management of the biodegradation process. These are important technical aspects to be considered when circular economy principles are applied to small farms.     

Response of marine benthic fauna to thin-layer capping with activated carbon in a large-scale field experiment in the Grenland fjords,Norway

Environmental Science and Pollution Research - A field experiment with thin-layer capping was conducted in the Grenland fjords, Norway, for remediation in situ of mercury and dioxin-contaminated...     

Improved Spray Dry Scrubbing through Grinding of FGD Recycle Material

A laboratory size spray dry scrubbing unit consisting of a spray dryer and a pulse Jet baghouse was used to study the effect of grinding recycle waste on SO₂ removal across the spray dryer and on sorbent utilization. The equipment treats simulated flue gas with a dry flow rate of 1.5 m³ h^?1 (stp) and utilizes an ultrasonic nozzle for atomization. The apparatus was initially tested over a broad range of operating conditions; a close agreement in SO₂ removal was found with data from much larger units. The effect of grinding the FGD recycle material on the SO₂ removal across the spray dryer was found to be great. Grinding the recycle material can enhance the SO₂ removal efficiency to a level comparable to operation with a large excess of fresh lime.     

Distribution Equilibrium of Mercury (II) Chloride between Water and Air Applied to Flue Gas Scrubbing

ABSTRACT

In the literature, different values of the distribution coefficient K_H for HgCl₂ between water and air are present in a range that spans more than 3 orders of magnitude. In order to determine if a waste incineration scrubber solution could become saturated with regard to HgCl₂, an accurate experimental determination of the distribution constant of HgCl₂ at elevated temperatures is needed. In this work, the coefficient has been determined at four different temperatures between 10 and 50 °C. The Arrhenius expression obtained is 5.5 x 10⁵ x exp[-(8060 ± 2200)/7] with a corresponding enthalpy for the process HgCl₂(aq)<» HgCl₂(g) of 67 ± 20 kJ/mole. K_H at 293 K was found to be ~5 x 10^-7 atm M^-1, which is in almost perfect agreement with an earlier study. Applying the obtained K_H values to waste incineration scrubber conditions shows that no major saturation effect will occur.     

Sorption of the herbicides diquat and difenzoquat from aqueous medium by polymeric resins in the presence of sodium dodecylsulfate: Kinetic and mechanistic study

The goal of this work was to propose a novel method for the solid-phase extraction of the herbicides diquat (DQT²⁺) and difenzoquat (DFQT⁺) from aqueous medium using polymeric Amberlite XAD-2 and XAD-4 resins in the presence of sodium dodecylsulfate (SDS). The addition of SDS to the medium was of fundamental importance in order to allow the formation of a negatively charged surface able to sorb the cationic solutes. Several factors that could influence the sorption process, such as SDS concentration in the medium, sorbent mass, pH, ionic strength, and initial concentration of the solutes were investigated. Kinetic studies were also performed to model the system and to identify the mechanisms that operate the sorption process of the herbicides. SDS concentration in the medium presented remarkable influence on the extraction efficiency, achieving maximum values when the ratios [SDS]/[herbicide] were approximately 90, for XAD-2, and 22 and 11 for DQT²⁺ and DFQT⁺, respectively, for XAD-4. The sorption process followed a pseudo second-order kinetic in all cases studied. It was also found that an intraparticle diffusion process controlled exclusively the sorption of the herbicides by the Amberlite XAD-2 and XAD-4 resins in the first 15 min, becoming less active with time.     

The context and habits of accident investigation practices: A study of 108 Swedish investigators

The context and habits of accident investigation practices were explored by means of questionnaire data obtained from accident investigators in the healthcare, transportation, nuclear and rescue sectors in Sweden. Issues explored included; resources, training, time spent in different phases of an investigation, methods and procedures, beliefs about causes to accidents, communication issues, etc. Examples of findings were: differences in the extent to which the ‘human factor’ was perceived as a dominant cause to accidents; manning resources to support investigations were perceived as rather scarce; underutilization of data from safety related processes such as risk analysis and auditing data; the phase of suggesting remedial actions (recommendations) were comparatively brief and generally not well supported. A majority of the investigators thought that the investigations were free from pressures to follow a specific direction; the investigators also thought that performing an investigation in itself (regardless of the specific results) had positive influences on safety. A majority of the investigators thought that upper management had a relatively strong influence on safety in the organizations. The results are discussed in terms of suggestions for strategies to strengthen investigation practices – particularly those conducted as part-time work in organizations.     

Circumpolar terrestrial arthropod monitoring: A review of ongoing activities,opportunities and challenges,with a focus on spiders

The terrestrial chapter of the Circumpolar Biodiversity Monitoring Programme (CBMP) has the potential to bring international multi-taxon, long-term monitoring together, but detailed fundamental species information for Arctic arthropods lags far behind that for vertebrates and plants. In this paper, we demonstrate this major challenge to the CBMP by focussing on spiders (Order: Araneae) as an example group. We collate available circumpolar data on the distribution of spiders and highlight the current monitoring opportunities and identify the key knowledge gaps to address before monitoring can become efficient. We found spider data to be more complete than data for other taxa, but still variable in quality and availability between Arctic regions, highlighting the need for greater international co-operation for baseline studies and data sharing. There is also a dearth of long-term datasets for spiders and other arthropod groups from which to assess status and trends of biodiversity. Therefore, baseline studies should be conducted at all monitoring stations and we make recommendations for the development of the CBMP in relation to terrestrial arthropods more generally.     

Reconnecting to the Biosphere

Humanity has emerged as a major force in the operation of the biosphere, with a significant imprint on the Earth System, challenging social-ecological resilience. This new situation calls for a fundamental shift in perspectives, world views, and institutions. Human development and progress must be reconnected to the capacity of the biosphere and essential ecosystem services to be sustained. Governance challenges include a highly interconnected and faster world, cascading social-ecological interactions and planetary boundaries that create vulnerabilities but also opportunities for social-ecological change and transformation. Tipping points and thresholds highlight the importance of understanding and managing resilience. New modes of flexible governance are emerging. A central challenge is to reconnect these efforts to the changing preconditions for societal development as active stewards of the Earth System. We suggest that the Millennium Development Goals need to be reframed in such a planetary stewardship context combined with a call for a new social contract on global sustainability. The ongoing mind shift in human relations with Earth and its boundaries provides exciting opportunities for societal development in collaboration with the biosphere--a global sustainability agenda for humanity.     

Past and Present Permafrost Temperatures in the Abisko Area: Redrilling of Boreholes

Monitoring of permafrost has been ongoing since 1978 in the Abisko area, northernmost Sweden, when measurements of active layer thickness started. In 1980, boreholes were drilled in three mires in the area to record permafrost temperatures. Recordings were made twice per year, and the last data were obtained in 2002. During the International Polar Year (2007–2008), new boreholes were drilled within the ‘Back to the Future’ (BTF) and ‘Thermal State of Permafrost’ (TSP) projects that enabled year-round temperature monitoring. Mean annual ground temperatures (MAGT) in the mires are close to 0°C, ranging from −0.16 to −0.47°C at 5 m depth. Data from the boreholes show increasing ground temperatures in the upper and lower part by 0.4 to 1°C between 1980 and 2002. At one mire, permafrost thickness has decreased from 15 m in 1980 to ca. 9 m in 2009, with an accelerating thawing trend during the last decade.     

What-You-Look-For-Is-What-You-Find – The consequences of underlying accident models in eight accident investigation manuals

Accident investigation manuals are influential documents on various levels in a safety management system, and it is therefore important to appraise them in the light of what we currently know – or assume – about the nature of accidents. Investigation manuals necessarily embody or represent an accident model, i.e., a set of assumptions about how accidents happen and what the important factors are. In this paper we examine three aspects of accident investigation as described in a number of investigation manuals. Firstly, we focus on accident models and in particular the assumptions about how different factors interact to cause – or prevent – accidents, i.e., the accident “mechanisms”. Secondly, we focus on the scope in the sense of the factors (or factor domains) that are considered in the models – for instance (hu)man, technology, and organization (MTO). Thirdly, we focus on the system of investigation or the activities that together constitute an accident investigation project/process. We found that the manuals all used complex linear models. The factors considered were in general (hu)man, technology, organization, and information. The causes found during an investigation reflect the assumptions of the accident model, following the ‘What-You-Look-For-Is-What-You-Find’ or WYLFIWYF principle. The identified causes typically became specific problems to be fixed during an implementation of solutions. This follows what can be called ‘What-You-Find-Is-What-You-Fix’ or WYFIWYF principle.