Newborns and low to moderate prenatal environmental lead exposure: might fathers be the key?

This study is part of the BioMadrid Project, a bio-monitoring study designed to assess pollutants in the environment surrounding children born in the Madrid region. Our aim in this report is to evaluate the association between prenatal lead exposure and fetal development using three biological samples (maternal and paternal blood lead at around 34 weeks of gestation as well as cord blood lead levels), three biomarkers of effect in cord blood peripheral lymphocytes (micronucleus in binucleated cells, nucleoplasmic bridges, and nuclear buds), and different anthropometrical characteristics at birth. Maternal and cord blood lead were not associated with newborn measurements or genotoxicity biomarkers. In contrast, increases in father blood lead were coupled with lower weight (mean difference (MD), ?110.8 g; 95 % confidence intervals (95%CI), ?235.6 to 6.00; p?<?0.10) and shorter abdominal (MD, ?0.81 cm; 95%CI, ?1.64 to 0.00; p?<?0.05) and cephalic (MD, ?0.32 cm; 95%CI, ?0.65 to 0.00; p?<?0.05) circumferences at birth as well as with the presence of nucleoplasmic bridges (odds ratio, 1.03; 95%CI, 1.00 to 1.06; p?<?0.05) and nuclear buds (odds ratio, 1.02; 95%CI, 0.99 to 1.04; p?<?0.10). These associations were mainly confined to female babies, in whom paternal lead was also inversely associated with length. Our results support the hypothesis that paternal lead exposure may be affecting the development of newborns.     

Electrochemical incineration of indigo. A comparative study between 2D (plate) and 3D (mesh) BDD anodes fitted into a filter-press reactor

This paper compares the performance of 2D (plate) and 3D (mesh) boron-doped diamond (BDD) electrodes, fitted into a filter-press reactor, during the electrochemical incineration of indigo textile dye as a model organic compound in chloride medium. The electrolyses were carried out in the FM01-LC reactor at mean fluid velocities between 0.9?≤?u?≤?10.4 and 1.2?≤?u?≤?13.9 cm s^?1 for the 2D BDD and the 3D BDD electrodes, respectively, at current densities of 5.63 and 15 mA cm^?2. The oxidation of the organic matter was promoted, on the one hand, via the physisorbed hydroxyl radicals (BDD(^●OH)) formed from water oxidation at the BDD surface and, on the other hand, via active chlorine formed from the oxidation of chloride ions on BDD. The performance of 2D BDD and 3D BDD electrodes in terms of current efficiency, energy consumption, and charge passage during the treatments is discussed.     

Chronic dietary exposure to pyrolytic and petrogenic mixtures of PAHs causes physiological disruption in zebrafish - part I: Survival and growth

The release of polycyclic aromatic hydrocarbons (PAHs) into the environment has increased very substantially over the last decades leading to high concentrations in sediments of contaminated areas. To evaluate the consequences of long-term chronic exposure to PAHs, zebrafish were exposed, from their first meal at 5 days post fertilisation until they became reproducing adults, to diets spiked with three PAH fractions at three environmentally relevant concentrations with the medium concentration being in the range of 4.6–6.7 μg g^?1 for total quantified PAHs including the 16 US-EPA indicator PAHs and alkylated derivatives. The fractions used were representative of PAHs of pyrolytic (PY) origin or of two different oils of differing compositions, a heavy fuel (HO) and a light crude oil (LO). Fish growth was inhibited by all PAH fractions and the effects were sex specific: as determined with 9-month-old adults, exposure to the highest PY inhibited growth of females; exposure to the highest HO and LO inhibited growth of males; also, the highest HO dramatically reduced survival. Morphological analysis indicated a disruption of jaw growth in larvae and malformations in adults. Intestinal and pancreatic enzyme activities were abnormal in 2-month-old exposed fish. These effects may contribute to poor growth. Finally, our results indicate that PAH mixtures of different compositions, representative of situations encountered in the wild, can promote lethal and sublethal effects which are likely to be detrimental for fish recruitment.     

TPS/PCL Composite Reinforced with Treated Sisal Fibers: Property, Biodegradation and Water-Absorption

Sisal fibers bleached with sodium-hydroxide followed by hydrogen peroxide treatment were incorporated in a thermoplastic starch/ε-polycaprolactone (TPS/PCL) blend via extrusion processing. These samples with smooth and homogenous surfaces were examined for their property, biodegradability and water absorption. Scanning electron microscopy revealed that the fibers were well dispersed in the matrix. In addition, it was found that the fibers and matrices interacted strongly. Blends with 20 % (dry weight-basis) fiber content showed some fiber agglomeration. Whereas blends with 10 % fibers showed increased crystallinity and lower water absorption capacity. The CO₂ evolution study showed that the thermoplastic starch samples without any additives had the highest rate and extent of degradation whereas the neat PCL samples had the lowest degradation rate. Addition of fiber to the TPS/PCL blend exhibited the degradation rates and extents that were somewhere in between the pure TPS and neat PCL. This work demonstrates that TPS/PCL composites reinforced with bleached sisal has superior structural characteristics and water resistance and thus, can be used as polymeric engineering composites for different applications.     

The Effect of Extraction Conditions on the Chemical Characteristics of Pectin from Opuntia ficus indica Cladode Flour

Pectin from the cladode flour of Opuntia ficus indica was extracted at different ethylenediaminetetraacetate concentrations (10 or 20 %), temperatures (40 or 80 °C), pH values (2 or 11), and times (10, 20, 30 40, 50 or 60 min). The effects of the extraction conditions on the yield, purity, and chemical composition of pectin were assessed. The highest pectin yield was observed for pectin obtained under alkaline conditions and 20 % of EDTA. However, pectin produced from alkaline extractions had a lower content of GalA than pectin produced from acid extractions. Higher temperatures favored the extraction of pectin under acid conditions, but these conditions diminished the arabinose content of pectins in a time-dependent manner. The tested extraction conditions caused only slight changes in the molecular weight of the extracted pectin as a function of time.     

Climate change impact on countrywide water balance in Bolivia

There is increasing concern about the ongoing reduction in water supplies in the tropical Andes due to climate change effects such as glacier/snow melting resulting from rising air temperatures. In addition, extreme events and population growth are already directly affecting life and water renewability in the country. A countrywide integrated national plan for improving basin-scale water management in Bolivia is needed to assure water availability for agriculture, industry, mining, and human consumption. This study aims to provide a modeling tool to assess Bolivia’s past, current, and future water availability and identify basins at risk of water deficits. The Soil Water Assessment Tool was used to simulate the monthly water balance from 1997 to 2008, as well as the water balance projected to 2050 for the entire country. It considers possible changes in air temperatures and precipitation proposed by 17 Global Circulation Models as well as carbon dioxide projections derived from the Special Report Emission Scenario. Overall, model results were close to satisfactory compared to observations, with some exceptions due to lack of information for expanding the timeline and improving calibration. Based on the calculation of three hydrologic indicators, the study identifies basins that would be the most susceptible to water deficits for a baseline from 1997 to 2008, and in the event of the projected climate change, to 2050.     

Morphological,compositional and ultrastructural changes in the Scrobicularia plana shell in response to environmental mercury – An indelible fingerprint of metal exposure?

The study aimed to assess morphological, structural and compositional alterations in Scrobicularia plana nacre environmentally exposed to mercury in order to seek out the possibility of the assessed alterations as a monitoring tool to handle complexity and interactions of metals in the environment involving a non-invasive methodology. Bivalves were collected from a mercury contaminated site (Laranjo basin – Ria de Aveiro, Portugal) and a reference site in the same aquatic system. The combination of scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) technique depicted a sheet like morphology of bivalve nacre collected from the reference site. Moreover, EDS plot exhibited the presence of potassium, oxygen, calcium, and carbon elements. Shells collected from the contaminated area depicted lamellar patches like structures with particle like morphology composition. SEM images corresponding to the elemental analysis by EDS plot clearly denoted the presence of mercury. SEM images from the other locations of the contaminated shells depicted large surface area, a broken or ruptured symmetry of organic matrix as well as crack-like gaps. The influence of environmental mercury affecting the surface morphology of S. plana nacre showed dimple like morphology (as proved by transmission electron microscopy, TEM). The possible explanation may be the replacement of calcium elements with other elements or alloys from the nacre composite collected from contaminated region. Therefore, the nacre fingerprint may be useful as innovative knowledge and applicable tool aiming at risk reduction from noxious mercury present in the environment. Overall results suggested the use of shell as an indelible fingerprint of metal exposure.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 × 10^{? 3} h^{? 1} to 7.0 × 10^{? 3} h^{? 1}. The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Performance of a field-scale permeable reactive barrier based on organic substrate and zero-valent iron for in situ remediation of acid mine drainage

A permeable reactive barrier (PRB) was installed in Aznalcóllar (Spain) in order to rehabilitate the Agrio aquifer groundwater severely contaminated with acid mine drainage after a serious mining accident. The filling material of the PRB consisted of a mixture of calcite, vegetal compost and, locally, Fe⁰ and sewage sludge. Among the successes of the PRB are the continuous neutralisation of pH and the removal of metals from groundwater within the PRB (removals of >95 %). Among the shortcomings are the improper PRB design due to the complexity of the internal structure of the Agrio alluvial deposits (which resulted in an inefficient capture of the contaminated plume), the poor degradability of the compost used and the short residence time within the PRB (which hindered a complete sulphate reduction), the clogging of a section of the PRB and the heterogeneities of the filling material (which resulted in preferential flows within the PRB). Undoubtedly, it is only through accumulated experience at field-scale systems that the potentials and limits of the PRB technology can be determined.