Models to Estimate Volatile Organic Hazardous Air Pollutant Emissions from Municipal Sewer Systems

Abstract

Emissions from municipal sewers are usually omitted from hazardous air pollutant (HAP) emission inventories. This omission may result from a lack of appreciation for the potential emission impact and/or from inadequate emission estimation procedures. This paper presents an analysis and comparison of the models available to estimate volatile organic HAP (VOHAP) emissions from sewers. Comparisons were made between the different theoretical foundations of the models, as well as between the emissions predicted by the models for a single sewer component. Sewer gas concentrations predicted by the models were also compared to measured sewer gas concentrations reported in the literature. Two of the models were compared in their ability to estimate sewer VOHAP emissions for a large U. S. city using National Pollution Discharge Effluent System data for the influent wastewater to the city's municipal wastewater treatment facilities. This estimate showed that, regardless of the model used, sewer emissions are a potentially significant source of VOHAP emissions in the urban environment. The choice of model, however, is thought to be less critical to sewer emission estimates than the source of sewer wastewater VOHAP concentration data.     

A probabilistic model for the carry-over of PCDD/Fs from feed to growing pigs

When food producing animals are contaminated with PCDD/F congeners, information on the contaminant’s concentration in the bodies of the animals at time of slaughter is needed for risk management purposes. We have developed a mathematical model for the kinetics of PCDD/Fs in growing pigs in case of contaminated feed fed for a limited duration of time. This model allows the prediction of concentrations in body fat. It considers absorption fractions of PCDD/Fs, clearance by metabolism, dilution by growth and excretion through fecal fat. The model parameters were calibrated by fitting the model to experimental data. On the basis of this toxicokinetic model a probabilistic model has been constructed. The probabilistic model handles the parameters with appropriate probability distributions and Monte-Carlo simulation technique, providing for realistic situations with many animals and a range of contaminations and feeding intervals. We applied the new model to describe the German dioxin incident of winter 2010/2011 and discuss its viability as decision tool. The approach demonstrated here is a showcase how a risk assessment in the case of contaminated feeding can be performed.     

Anionic surfactant linear alkylbenzene sulfonates (LAS) in sediments from the Gulf of Gdańsk (southern Baltic Sea, Poland) and its environmental implications

Linear alkylbenzene sulfonate (LAS) is a group of anionic surfactants employed in the formulation of laundry and cleaning products, with a global production rate of 4 million metric tons. Sediments from the Polish coast of the southern Baltic Sea were collected at ten stations. Total LAS concentrations, measured by high-performance liquid chromatography, were between 0.04 and 0.72 mg LAS·kg(-1) dry weight. Highest LAS concentrations were found in suspended matter collected from the Vistula River, sediment collected close to the Vistula River mouth and from the Gdańsk Deep, known as the depositional area. With the obtained environmental LAS concentrations, a risk assessment for this surfactant has been carried out, based on publicly available acute and chronic toxicity data in target organisms. The results indicated that LAS could pose a low risk for the existing benthic community applying worst case scenario assessment. This is the first time that levels of LAS have been measured in environmental samples of the southern Baltic Sea.     

Material efficiency: A white paper

For most materials used to provide buildings, infrastructure, equipment and products, global stocks are still sufficient to meet anticipated demand, but the environmental impacts of materials production and processing, particularly those related to energy, are rapidly becoming critical. These impacts can be ameliorated to some extent by the ongoing pursuit of efficiencies within existing processes, but demand is anticipated to double in the next 40 years, and this will lead to an unacceptable increase in overall impacts unless the total requirement for material production and processing is reduced. This is the goal of material efficiency, and this paper aims to stimulate interest in the area. Four major strategies for reducing material demand through material efficiency are discussed: longer-lasting products; modularisation and remanufacturing; component re-use; designing products with less material. In industrialised nations, these strategies have had little attention, because of economic, regulatory and social barriers, which are each examined. However, evidence from waste management and the pursuit of energy efficiency suggests that these barriers might be overcome, and an outline of potential mechanisms for change is given. In bringing together insights into material efficiency from a wide range of disciplines, the paper presents a set of 20 open questions for future work.     

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO₂ emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production.Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO₂ emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions.Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement.     

Issues associated with possible implementation of Non-Invasive Prenatal Testing (NIPT) in first-tier screening: A rapid scoping review

In recent years, as the implementation and use of Non-Invasive Prenatal Testing (NIPT) have increased, the cost of the test has been decreasing. The cost of NIPT is expected to fall further in the upcoming years. As a result of the decreasing cost of NIPT, many jurisdictions may change their prenatal screening policies toward abandoning serum-based screening and instead, implement and support NIPT as the first-tier screening for all women. There are several concerns in replacing first-trimester screening with NIPT. In this scoping review, we aimed to map the existing knowledge about possible issues in the systematic implementation of NIPT as the primary method of first-tier screening and to assess if any jurisdiction has altered its policy and discontinued serum-based prenatal screening in exchange for NIPT. The Medline database (Ovid) and Google Scholar was searched and all the studies discussing, investigating, or reporting on the systematic implementation of NIPT as the primary method of first-tier screening were included. All the studies went through a two-stage screening process and included full-text articles were reviewed. We did not find any articles indicating a country or region that replaced traditional prenatal screening by NIPT. The included articles were charted, and the data about the possible issues in the systematic implementation of NIPT as the primary method of first-tier screening are summarized narratively and presented in tables in four categories. The findings of this scoping review may be informative for stakeholders and policymakers regarding recent changes in NIPT implementation policies around the world and may aid with developing policy for NIPT implementation with a broader perspective.     

Can environmental compensation contribute to socially equitable conservation? The case of an ecological fiscal transfer in the Brazilian Atlantic forest

ABSTRACT

Regions of high biodiversity often coincide with regions of poverty and conservation can imply economic and social costs for poor resident populations. Environmental compensation is considered a tool to reduce socio-environmental conflict, improve the equity of conservation and promote sustainable development. The intricacies of specific socio-ecological systems may determine how compensation payments are interpreted locally to produce outcomes. This research examines the social perceptions of an ecological fiscal transfer which intends to compensate the local public administration for the substantial costs of conservation in a hotspot of biological and social diversity in the Brazilian Atlantic forest. In this context we explore whether financial compensation (1) influences local perceptions of the conservation regime, (2) contributes towards the reconciliation of human-conservation conflicts and (3) triggers any meaningful socio-economic improvement that would counter the local costs of conservation. Results show that environmental compensation is not widely recognised as effectively benefiting the community. Local authorities consider compensation insufficient to enact a sustainable development agenda. Environmental compensation could play an important role in a policy mix for socially equitable conservation by being explicitly linked to community benefits, especially to fostering local livelihoods. The collaboration of actors operating across multiple governance levels may improve the institutional capacity of local actors to produce effective outcomes.