Does the energy labelling system for domestic tumble dryers serve its purpose?

Tumble dryers sold on the market today are labelled according to their energy efficiency. This labelling system has primarily two purposes: to guide buyers to a product with low energy use, lower cost and lower environmental impact and to encourage producers to develop even more energy-efficient products. Tumble dryers are optimized for their maximum capacity, which is used as the standard load for determining the energy label. Three different tumble dryers have been tested with different drying loads. Results indicate that all the tested tumble dryers have significantly lower energy efficiency when drying small loads. In order to encourage the development of tumble dryers with high energy efficiency at drying loads used in ordinary households, the standards for the energy labelling system should be revised.     

Industrial symbiosis and the policy instruments of sustainable consumption and production

Industrial symbioses (ISs) and eco-industrial parks (EIPs) are key concepts of industrial ecology (IE). The aim of ISs and EIPs is to minimise inefficient material and energy use by utilising local by-product and energy flows. Industrial symbioses tend to develop through spontaneous action of economic actors, for gaining of economic benefit, but these systems can be designed and promoted via policy instruments as well. A literature review showed that national programmes for eco-industrial parks can be found in different parts of the world. In the action programmes and other sustainable consumption and production (SCP) policy documents of the EU, on the other hand, industrial symbioses gain less recognition as a path to enhanced sustainable production. In this article, we consider this and also analyse how the evolution and environmental performance of an industrial symbiosis system centred on a Finnish pulp and paper mill have been affected by SCP policy instruments. With regard to the system forming the subject of the case study, and Finnish industrial systems in general, policy instruments have succeeded in reducing emissions but not in systematically encouraging operators toward symbiosis-like activities. All in all, few studies exist on the overall impact of policy instruments promoting design of eco-industrial parks. It is not self-evident that symbiosis-like production systems would be sustainable in every case, as the background assumptions for political promotion of EIPs suggest. We concluded that industrial symbioses should be analysed and developed on a life cycle basis, with documentation of the real environmental benefits due to efficient resource use and decreased emissions in comparison to standalone production. ISs can then bring eco-competitiveness to companies in relation to SCP tools, such as environmental permits, ecolabels, and future product regulation based on the Ecodesign Directive in Europe. Indirect encouragement of symbiosis through land-use regulation and planning, in such a way that material fluxes between companies are possible both in operations and in financial terms, may prove effective. The same holds for waste policies that encourage increased reuse of a company’s waste by other enterprises.     

Evaluation of guardrail systems for preventing falls through roof and floor holes

Introduction

Fall-related occupational injuries and fatalities are serious problems in the U.S. construction industry, especially incidents related to unguarded holes. The National Institute for Occupational Safety and Health, Division of Safety Research, Morgantown, WV conducted a project to evaluate the effectiveness of guardrail systems to prevent falls through roof and floor holes.

Methods

Two commercial edge-protection products were evaluated when used as perimeter guarding around a roof hole. Installations of the commercial products were compared to job-built guardrails constructed of 2^″ × 4^″ construction-grade lumber. Occupational Safety and Health Administration (OSHA) regulations require that “a force of at least 200 pounds” must be supported by the top rail of a guardrail system “in any outward or downward direction at any point along the top edge.” A laboratory testing system was developed to evaluate this requirement. A dynamic 200-lb force was generated against the top rail using a weighted manikin mounted on a hinged steel frame. Nine construction workers, who served as test subjects, each built five different guardrail configurations.

Results

All 45 configurations met the 200-lb OSHA requirement. Installation time for one commercial product was 32% quicker than the job-built configuration (25.6 min vs. 37.9 min).

Impact on Industry

This study: (a) indicates that the two edge-protection products can be used as perimeter guarding; (b) highlights the importance of using proper materials and fasteners to construct guardrails to protect workers from falling into unguarded roof and floor holes; and (c) discusses an overall-strength-testing methodology that can be used by fall-protection researchers.     

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

Problem

Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility.

Method

Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n = 16).

Results

The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions.

Conclusion

Overall, the 'Collar Base' intervention design received the best usability ratings.

Impact on Industry

Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users.     

Effectiveness of a worker-worn electric-field sensor to detect power-line proximity and electrical-contact

Problem

Construction workers suffer the most electrocutions among all industries. Currently, there are no electrical contact warning devices on the market to protect workers. This paper proposes a worker-worn electric-field sensor. As the worker is in proximity to, or in contact with, a live power-circuit, the sensor sets off an audible/visual warning alarm. The sensor also has the potential to wirelessly trip a wireless-capable circuit breaker, and to trigger a wireless transmitter to notify emergency response of an electrical contact.

Methods

An experiment was conducted to measure electric-field variation on simulated human-wrists (10 defrosted hog-legs) in various proximities and in electrical-contact to a simulated power-circuit. The purpose of these tests was to determine the feasibility of developing a worker-worn electric-field detection sensor for use in protecting workers from contact with energized electrical conductors.

Results

This study observed a significant electric-field-magnitude increase as a hog-leg approaches the live-circuit, and the distinct electric-field-magnitude jump as the leg contacts with the live-circuit. The observation indicates that this sensor can be an effective device to warn the workers of electrical hazards. Additionally, the sensor has the potential to wirelessly trip a wireless-capable circuit-breaker and trigger a wireless transmitter (such as a cell phone) to notify an emergency response. The prompt notification prevents the worker from further injury caused by postponed medical-care.

Impact on Industry

Widespread use of this sensor could lower electrocution and electrically related injury rates in the construction industry.     

Continued progress in the prevention of nail gun injuries among apprentice carpenters: What will it take to see wider spread injury reductions?

Problem

Nail guns are a common source of acute, and potentially serious, injury in residential construction.

Method

Data on nail gun injuries, hours worked and hours of tool use were collected in 2008 from union apprentice carpenters (n = 464) through classroom surveys; this completed four years of serial cross-sectional data collection from apprentices. A predictive model of injury risk was constructed using Poisson regression.

Results

Injury rates declined 55% from baseline measures in 2005 with early training and increased use of tools with sequential actuation. Injury rates declined among users of tools with both actuation systems, but the rates of injury were consistently twice as high among those using tools with contact trip triggers.

Discussion and impact

Nail gun injuries can be reduced markedly through early training and use of tools with sequential actuation. These successful efforts need to be diffused broadly, including to the non-union sector.     

The NIOSH Construction Program: Research to practice, impact, and developing a National Construction Agenda

The U.S. National Institute for Occupational Safety and Health (NIOSH) conducts research to improve and protect the health and safety of workers. This paper describes the experience of the NIOSH Construction Program with two recent program planning initiatives intended to improve the program: (a) an independent external review of work over the past decade and (b) the development of strategic goals organized into a “National Construction Agenda” to guide a decade of future work. These goals, developed with input from construction industry stakeholders and researchers, are a part of the NIOSH National Occupational Research Agenda (NORA) initiative. The NORA goals are intended to provide an ambitious set of goals for all construction stakeholders to work together on. Both efforts relate to insuring the relevance and impact of research, reflecting an emerging policy perspective that research programs should be judged not just by the quality and quantity of science produced, but by the industry impact and tangible benefit resulting from the research. This paper describes how views on research planning have evolved to incorporate lessons learned about how research leads to improved safety and health for workers. It also describes the process used to develop the goals and the resulting strategic and intermediate goals that comprise the National Construction Agenda.     

Assessing motivation for work environment improvements: Internal consistency, reliability and factorial structure

Problem

Workers' motivation to actively take part in improvements to the work environment is assumed to be important for the efficiency of investments for that purpose. That gives rise to the need for a tool to measure this motivation.

Method

A questionnaire to measure motivation for improvements to the work environment has been designed. Internal consistency and test-retest reliability of the domains of the questionnaire have been measured, and the factorial structure has been explored, from the answers of 113 employees.

Results

The internal consistency is high (0.94), as well as the correlation for the total score (0.84). Three factors are identified accounting for 61.6% of the total variance.

Discussion

The questionnaire can be a useful tool in improving intervention methods.

Impact on Industry

The expectation is that the tool can be useful, particularly with the aim of improving efficiency of companies' investments for work environment improvements.     

A reporting guide for studies on individual differences in traffic safety

Problem

Studies on individual differences in traffic safety report differently on their methodologies, and use different statistics, and these are therefore difficult to compare and meta-analyze.

Method

Based upon a previous, extensive review and meta-analysis of the traffic safety literature, several recommendations are made about what features of the methodology of studies on individual differences (including evaluations) in safety need to be reported to facilitate interpretation and meta-analysis. Similarly, some basic types of statistical values are recommended.

Impact on Industry

The accumulation of knowledge about individual differences in traffic safety would be facilitated if scientific authors and journals adhered to these guidelines.     

Re-education of young driving offenders; Effects on self-reports of driver behavior

Introduction

Offending drivers are often re-educated, but these courses have seldom been shown to have any safety effects.

Method

An on-line improvement course for offending drivers below the age of 25 was evaluated with several driver inventories.

Results

The drivers reported higher levels of aggression, stress, sensation seeking, drunk driving, and driving violations, six months after the course than before. However, these levels were lower than those of controls, indicating that the initially low levels for the education group were due to socially desirable responding, as measured by a lie scale, an effect that waned after the course.

Discussion

The results can be interpreted as a positive effect of the education, although this conclusion is tentative and not in agreement with all effects in the data.

Impact on industry

The results are in disagreement with previous evaluation studies using the same or similar instruments, and show the need to include controls for social desirability in self-report studies.