Carbon Molecular Sieving Membranes Derived from Lignin-Based Materials

Carbon molecular sieving membranes were prepared by pyrolysis of lignocresol derived from lignin by the phase-separation method. Lignocresol membranes formed by a dip process on a porous -alumina tubing were carbonized at 400–800°C under nitrogen atmosphere. The thickness of the membrane formed on the outer surface of the substrate was about 400 nm judging from SEM observation. Gas-evolving behavior of lignocresol was measured using thermogravimetry-mass spectrometry (TG-MS). The gaseous products evolved from lignocresol included a number of fragments with higher molecular weights; whereas those from phenolic resin are mainly due to phenol and methylphenol. These evolved pyrolysis fragments effectively contribute to micropore formation of carbonized lignocresol membranes. Gas permeation rates through the membrane decreased in the order of increasing kinetic molecular diameter of the penetrant gas, and the membrane behaved like a molecular sieve. The permeation properties were dependent on heating conditions, and a pyrolysis temperature of 600°C gave the best membrane performance. Gas selectivities of the membrane prepared at 600°C were 50, 8, 290, and 87 for CO₂/N₂, O₂/N₂, H₂/CH₄, and CO₂/CH₄ at 35°C, respectively.     

Empirical research on diffusion behavior of leaked gas in the ground

Chemical plants and gas utilities own large underground pipelines to transport material such as combustible gas. For example, city gas utilities in Japan have about 230,000 km of pipelines, even if only the pipelines to deliver gas to their customers are considered. Any accidents involving such pipelines can lead to enormous human and physical damage, and their security is therefore a top-priority issue for utilities. For the safety management of underground pipelines, in addition to assessment of the long-term reliability of pipeline materials, it is extremely important to understand the diffusion behavior of gases in the ground, such as the diffusion range and time, in the case of leakage, and the impact on the surrounding area is a fundamental factor to be considered in the design and maintenance of safe facilities and for emergency response. Although many papers introduce the situations of gas diffusion in the atmosphere such as indoor and outdoor conditions, only fundamental surveys have been conducted on gas diffusion in the ground, and there have been few full-scale empirical studies. This study reports the results of the verification of the diffusion behavior with full-scale gas leakage experiments simulating real underground pipelines, as well as the outcomes of the applicability test of a numerical simulation model investigated and proposed based on the results. This technical knowledge regarding security will contribute to further improvement of safety in the industry.     

Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer III. Construction of an automated survey system and its application

An automated survey system on the chemicals in environments by a gas chromatography-mass spectrometry-computer system has been constructed of Three Dimensional Mass Chromatography, Modified Probability Based Matching method, and Self Training Interpretive and Retrieval method. And it was applied to analyze environmental materials, with interesting results.     

Evaporation characteristics of multi-component liquid

Evaporation rate of multi-component liquid such as motor gasoline is expected to change greatly with progress of evaporation because its composition changes. Therefore it is difficult to predict accurately amount of generated combustible vapor in the case that a multi-component liquid is spilt on a floor. Then, we assumed an evaporation model that composition of the vapor obeys the Raoult's law which considers the activity coefficient. Using the model, we calculated the vapor composition, the vapor pressure and the evaporation rate of the liquid. Then, comparison was done between the calculated values and the measured values obtained in this study. “Weight loss fraction” was used as a parameter signifying the progress of evaporation. The variations of the evaporation property were accurately predicted by the model. We derived a prediction model of the amount of generated combustible vapor from the relation between weight loss fraction and evaporation rate. It was found that the amount of generated vapor was expressed as a logarithmic function of time in case of a five-component liquid. Furthermore, we showed that the predicted flash point of a liquid using the composition obtained from the model was in good agreement with an experimental result.     

Low dose beta-emitter source induces sexual reproduction instead of fragmentation in an earthworm, Enchytraeus japonensis

We examined whether background radiation, or radiation at a slightly higher level, plays a role in the reproduction of a terrestrial earthworm. Enchytraeus japonensis a recently described terrestrial oligochaete, reproduces asexually by fragmentation and subsequent regeneration. Following radiation exposure in which the worms were subjected to a 32P beta-emitter source at 15 times the background dose rate (4.5 microGy/h), a statistically significant decrease in the number of fragmentations was observed as compared with the sham controls. At that time, in a stained preparation with haematoxylin and eosin (HE), sexual reproduction occurred instead of asexual fragmentation, and mature oocytes were observed in the body of grown worms. However, increasing the radiation dose rate by 30 microGy/h resulted in the complete disappearance of the radiation-induced effects, i.e., fragmentation again occurred after 14 h. The results of this study indicate that a lower dose of radiation may be essential to achieve sexual reproduction, inducing an inhibition of fragmentation (asexual reproduction), but at higher, more cytotoxic doses of radiation these effects are negated.     

Polychlorinated biphenyls (PCBs) in sediments in Hong Kong: a congener-specific approach to the study of coplanar PCBs in aquatic ecosystems

Patterns of contamination by polychlorinated biphenyls (PCBs) were investigated in fourteen samples of coastal sediments from Hong Kong. Congener-specific analyses revealed nine sediment samples from Junk Bay to contain PCBs at concentrations ranging from 31 to 2200 ng g(-1) dry weight, concentrations generally increasing with distance north in the Bay. By contrast, five sediments from the Tolo area to the north-east of Hong Kong exhibited total PCB levels of only 6.6 to 45 ng g(-) dry weight. The patterns of relative abundance of PCB congeners in the northern Junk Bay sediments suggested the existence of ongoing source(s) of PCBs in this area; biphenyls of lower chlorination were present at high concentration in these samples. Three coplanar PCBs (3', 4, 4'-tetrachlorobiphenyl; 3,3',4,4',5-pentachlorobiphenyl; and 3,3',4,4',5,5'-hexachlorobiphenyl) were found to be present in Junk Bay sediments; these are highly toxic and are cause for concern in aquatic environments. The abundance of the three coplanar PCBs in the sediments studied was similar to that in commercial PCB mixtures, suggesting that these congeners are not enriched over other PCBs by the sediments of coastal ecosystems. It is concluded that the preferential enrichment of coplanar PCBs occurs in the biosphere, rather than in sediments.     

Influence of velocity field on driftwood accumulation at a bridge with a single pier

Environmental Fluid Mechanics - Transport of driftwood during heavy rainfall events can intensify the flood hazard. Driftwood accumulates at a bridge and backwater rises. Accumulated logs sink...     

Spatial evolution of coherent motions in finite-length vegetation patch flow

A number of experimental studies on submerged canopy flows have focused on fully-developed flow and turbulent characteristics. In many natural rivers, however, aquatic vegetation occurs in patches of finite length. In such vegetated flows, the shear layer is not formed at the upstream edge of the vegetation patch and coherent motions develop downstream. Therefore, more work is neededz to reveal the development process for large-scale coherent structures within vegetation patches. For this work, we considered the effect of a limited length vegetation patch. Turbulence measurements were intensively conducted in open-channel flows with submerged vegetation using Particle Image Velocimetry (PIV). To examine the transition from boundary-layer flow upstream of the vegetation patch to a mixing-layer-type flow within the patch, velocity profiles were measured at 33 positions in a longitudinal direction. A phenomenological model for the development process in the vegetation flow was developed. The model decomposed the entire flow region into four zones. The four zones are the following: (i) the smooth bed zone, (ii) the diverging flow zone, (iii) the developing zone and (iv) the fully-developed zone. The PIV data also confirmed the efficiency of the mixing-layer analogy and provided insight into the spatial evolution of coherent motions.