The effects of current water management practices on methane emissions in Japanese rice cultivation

Cultivated wetland rice fields are a source of methane (CH₄) emissions. To estimate CH₄ emissions and develop policies to reduce such emissions, information on water management at the farm level is crucial. It is known that farmers implement midseason drainage (MD) to increase rice yields and save water. However, little is known about whether MD is carried out in soils where CH₄ emissions are high and how part-time status will influence management. The objective of this study is to identify factors that determine MD implementation using a binomial logistic regression model based on a farm-level survey in Japan and to indicate possible changes in estimates of CH₄ emissions, accounting for current water management practices. The implementation rates were significantly higher where the soil types were classified as having the potential for high CH₄ emissions. Under current water management practices, the duration of MD and the percentage of continuous flooding were 5 to 7 days longer and approximately 7 % higher, respectively, than the values used by the Greenhouse Gas Inventory Office of Japan, which in turn are used to report greenhouse gas emissions to the United Nations Framework Convention on Climate Change. By accounting for current water conditions with the Tier 2 method, this study indicates that national estimates of CH₄ emissions from rice straw application areas could be lowered by 12.7 %. These results may contribute to the development of a mitigation policy that will help to further reduce CH₄ emissions.     

Contribution of metabolites to mutagenicity during anaerobic biodegradation of fenitrothion

The contribution of fenitrothion and its microbial metabolites to the mutagenicity of a fenitrothion-containing solution was investigated during anaerobic biodegradation. Although a mixed culture of bacteria obtained from a paddy field degraded fenitrothion and reduced its concentration from 4.6 to 0.1 mg/l in 6 days, the indirect mutagenicity of the solution in Salmonella strain YG1029 increased. This increase was found to be partially due to amino-fenitrothion generated during the biodegradation. In addition, other unidentified metabolites contributed to the mutagenicity. In contrast, the indirect mutagenicity in strain YG1042, which was initially large because of fenitrothion, then decreased, and increased again. This increase in mutagenicity was also due to amino-fenitrothion and other unidentified metabolites. The mutagenicity in strains YG1029 and YG1042 decreased after day 6. The greatest contribution of amino-fenitrothion to the mutagenicity was calculated to be 73% and 61% in YG1029 and YG1042 on day 3 of incubation, respectively. That of unidentified metabolites was calculated at 49% and 61% on day 20, respectively. Therefore, because not all the toxic metabolites of a compound can be identified, it is important to evaluate the toxicity of a whole solution in a bioassay such as the Ames assay rather than deducing the toxicity of the solution from the combined toxicities of known metabolites.     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Biological solubilization and mineralization as novel approach for the pretreatment of food waste

The performance of a garbage disposal system to solubilize and mineralize food wastes through biological solubilization was evaluated through the examination of the effects of operational conditions like water supply volume, water supply frequency and aeration on the amount of waste solubilized, mineralized and accumulated in the reactor. The biological solubilization process consisted of a solubilization reactor and a circulation tank. Food waste and fresh water were supplied into the solubilization reactor with support media. Wastewater from the solubilization reactor was discharged to the circulation tank and water in the circulation tank was periodically pumped back to the solubilization reactor. In case of the total food waste loading of 16 kg m(3-1) d(-1), little carbon (0-5.7%) accumulated in the reactor as long as the system was kept under aerobic condition through large volume of water supply (higher than 3.5 lh(-1)) or applying aeration in the circulation tank. However, 42% of the loaded carbon accumulated under anaerobic condition in low water supply (less than 1.8 lh(-1)). The rest of the waste was either solubilized or mineralized. The aeration in the circulation tank, therefore, was effective to provide similar solubilization and mineralization as the large volume of water supply. However, frequency of feeding at the large volume of water supply had no significant effect on the amount of waste solubilization and mineralization.     

A numerical method to predict flame fractal dimension during gas explosion

Accurate prediction of the flame propagation velocity during a gas explosion is essential to assess its consequences and to evaluate the risk level. The propagating premixed flame is self-turbulized due to the hydrodynamic instability, resulting in a fractal flame structure. It is therefore important for accurate prediction of flame speed to understand the flame’s fractal structure in detail and to predict its fractal dimension in particular. Numerical simulations of spherically-propagating flames have been previously attempted for such purposes. There are, however, difficulties to accurately predict the fractal dimension from the result of the numerical simulation of a spherically-propagating flame. In this study, we propose a method to easily predict the fractal dimension based on the numerical simulation of a planar flame. Planar flame propagation is simulated for different sizes of computational domain. The fractal dimension can be determined from the dependence of flame speed on computational domain size. The determined fractal dimension is favorably compared with previous experimental results.     

Recycling and consumption in Germany and Japan: a case of toilet paper

This paper compares the recycling attitudes of consumers in Germany and Japan, based on our nationwide questionnaires. We analyzed consumption behavior as well as recycling behavior in narrow sense, because it is important to study the former to see how the supply of recycled materials is balanced with the demand, particularly in Japan which exports little recycled materials. Toilet paper was adopted as a specific good for study, because consumers have options of buying virgin products and recycled products. It was found that German households pay for waste collection specifically and have higher recycling rates than Japanese households. On the other hand, similar figures in German and Japanese consumers were observed with regard to consumption of recycled products. Their purchasing criteria and preference on virgin and recycled products of toilet paper were examined by self-report and blind test with 2×2 experimental design for toilet paper (German versus Japanese, virgin versus recycled). Blind test showed that people prefer domestic and virgin products in both countries. Half of respondents rating virgin products guessed that the products contained recycled material. For Japanese, the material of the sample toilet paper, made from virgin pulp, seems to be a more determining factor than the nationality of products, i.e. made in Japan. On the other hand, for Germans, the domestic nature seems to be a more dominant factor than the material, i.e. made from virgin material. Canonical discriminant analysis in conjunction with logistic regression based on self-reporting data detected the characters ‘multiplied’, ‘appearance’ and ‘brand’ as major factors making the difference in preference between the two countries. The possible reasons causing the similarity and dissimilarity between the two countries are discussed with reference to the background history.     

Toxicity and metabolism of copper pyrithione and its degradation product, 2,2'-dipyridyldisulfide in a marine polychaete

We conducted acute toxicity tests and sediment toxicity tests for copper pyrithione (CuPT) and a metal pyrithione degradation product, 2,2′-dipyridyldisulfide [(PS)₂], using a marine polychaete Perinereis nuntia. The acute toxicity tests yielded 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 0.06 mg L⁻¹ and 7.9 mg L⁻¹, respectively. Sediment toxicity tests resulted in 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 1.1 mg kg⁻¹ dry wt. and 14 mg kg⁻¹ dry wt., respectively. In addition to mortality, sediment avoidance behavior and decreases in animal growth rate were observed; growth rate was the most susceptible endpoint in the sediment toxicity tests of both toxicants. Thus, we propose lowest observed effect concentrations of 0.3 mg kg⁻¹ dry wt. and 0.2 mg kg⁻¹ dry wt. for CuPT and (PS)₂, respectively, and no observed effect concentrations of 0.1 mg kg⁻¹ dry wt. for both CuPT and (PS)₂. The difference in the toxicity values between CuPT and (PS)₂ observed in the acute toxicity test was greater than the difference in these values in the sediment toxicity test, and we attribute this to (PS)₂ being more hydrophilic than CuPT. In addition to the toxicity tests, we analyzed conjugation activity of several polychaete enzymes to the toxicants and marked activity of palmitoyl coenzyme-A:biocides acyltransferase and UDP-glucuronosyl transferase was observed.     

Differences in the Spatial Variability Among CO2, CH4, and N2O Gas Fluxes from an Urban Forest Soil in Japan

The spatial variability of carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O) fluxes from forest soil with high nitrogen (N) deposition was investigated at a rolling hill region in Japan. Gas fluxes were measured on July 25th and December 5th, 2008 at 100 points within a 100 × 100 m grid. Slope direction and position influenced soil characteristics and site-specific emissions were found. The CO₂ flux showed no topological difference in July, but was significantly lower in December for north-slope with coniferous trees. Spatial dependency of CH₄ fluxes was stronger than that of CO₂ or N₂O and showed a significantly higher uptake in hill top, and emissions in the valley indicating strong influence of water status. N₂O fluxes showed no spatial dependency and exhibited high hot spots at different topology in July and December. The high N deposition led to high N₂O fluxes and emphasized the spatial variability.     

Fungal hydroxylation of polychlorinated naphthalenes with chlorine migration by wood rotting fungi

Biodegradation of the polychlorinated naphthalenes (PCNs) 1,4-dichloronaphthalene (1,4-DCN), 2,7-dichloronaphthalene (2,7-DCN), and 1,2,3,4-tetrachloronaphthalene (1,2,3,4-TCN), by the white-rot fungus Phlebia lindtneri was investigated. 1,4-DCN was metabolized to form six metabolites by the fungus. It was estimated from GC–MS fragment patterns that the metabolites were four putative hydroxylated and two dihydrodihydroxylated compounds. One of the hydroxylated products was identified as 2,4-dichloro-1-naphthol by GC–MS analysis using an authentic standard. This intermediate indicated chlorine migration in a biological system of P. lindtneri. 2,7-DCN was metabolized to five hydroxylated metabolites and a dihydrodihydroxylated metabolite. Significant inhibition of the degradation of DCNs and formation of their metabolic products was observed in incubation with the cytochrome P-450 monooxygenase inhibitor piperonyl butoxide. The formation of the dihydrodiol-like metabolites, chlorine migration and the experiment with P-450 inhibitor suggested that P. lindtneri provides hydroxyl metabolites via benzene oxide intermediates of DCNs by a cytochrome P450 monooxygenase. In addition, P. lindtneri degraded 1,2,3,4-TCN; two hydroxylated compounds and a dihydrodihydroxylated compound were formed.     

Brominated dioxin-like compounds: in vitro assessment in comparison to classical dioxin-like compounds and other polyaromatic compounds

Recently, several countries agreed to adopt the Stockholm convention on persistent organic pollutants (POPs). One future obligation will be to add other POPs as new evidence becomes available. In vitro cell-based bioassays offer a rapid, sensitive, and relatively inexpensive solution to screen possible POP candidates. In the present study, we investigated the aryl hydrocarbon (Ah)-receptor activity of several dioxin-like POPs by using the Micro-EROD (Ethoxy-Resorufin-O-Deethylase) and DR-CALUX (Dioxin-Responsive-Chemical Activated Luciferase gene eXpression) bioassays, which are two state-of-the-art methods. The Micro-EROD system used in our study utilizes a wild-type rat liver cell line (rat liver H4IIEC3/T cells), while the DR-CALUX bioassay consists of a genetically modified rat hepatoma H4IIE cell line that incorporates the firefly luciferase gene coupled to dioxin-responsive elements (DREs) as a reporter gene. In the case of the DR-CALUX bioassay, we used an exposure time of 24 h, whereas we used a 72-h exposure time in the Micro-EROD bioassay. The aim of this study was to compare conventional dioxin-like POPs (such as polychlorinated dibenzodioxins and -furans, PCDD/Fs and coplanar polychlorinated biphenyls, PCBs) with several other classes of possible candidates to be added to the current toxicity equivalent factor (TEF) model in the future. Therefore, this study compares in vitro CYP1A1 (Micro-EROD bioassay) and firefly luciferase induction (DR-CALUX bioassay) in several mixed polyhalogenated dibenzodioxins and -furans (PXDD/Fs; X=Br, Cl, or F), alkyl-substituted polyhalogenated dibenzodioxins and -furans (PMCDD/Fs; M=methyl), polyhalogenated biphenyls (PXBs, X=Br, Cl ), polybrominated diphenyl ethers (PBDEs), pentabromophenols (PBPs), and tetrabromobisphenol-A (TBBP-A). We also evaluate congener-specific relative potencies (REPs) and efficacies (% of TCDD(max)) and discuss the dose-response curves of these compounds, as well as the dioxin-like potency of several other Ah-receptor agonists, such as those of the polyaromatic hydrocarbons (PAHs) and polychlorinated naphthalenes (PCNs). The highest REP values were found for several PXDD/F congeners, followed by some coplanar PXBs, trichlorinated PCDD/Fs, PAHs, PBDE-126, 1-6-HxCN, and some brominated flame retardants (TBBP-A). These in vitro investigations indicate that further research is necessary to evaluate more Ah-receptor agonists for dioxin-like potency.