The conservation benefits of cost-effective land acquisition: A case study in Maryland

Economic theory asserts that to achieve maximum conservation benefits land acquisition needs to be cost effective. Yet the most common planning technique used by land conservation organizations is ‘benefit-targeting’ that focuses only on acquiring parcels with the highest benefits and ignores costs. Unlike most of the literature which focuses on covering problems, this research applies optimization techniques to achieve maximum aggregate conservation benefits for an ongoing land acquisition effort in the Catoctin Mountain Region in central Maryland. For this case study, optimization yields additional conservation benefits worth an estimated $3.1–$3.9 million or achieves the same level of conservation benefits but at a cost savings ranging from $0.9 to $3.5 million, depending on the initial budget size. Finally, the highest efficiencies are achieved in low budget scenarios, like those most prevalent in conservation efforts.     

COLIFORMS AND WATER QUALITY: USE OF DATA IN PROJECT DESIGN AND OPERATION1

ABSTRACT: Knowledge of coliform transport and disappearance may provide information for project design and operation that minimizes potential water quality problems such as the violation of body contact recreation standards. Storm events were sampled in the Caddo River above DeGray Reservoir, Arkansas, and then tracked through the reservoir using the increased turbidity associated with the storm flows. Fecal coliforms were sampled both in the river and throughout the water column in the reservoir. In general, increased fecal coliform concentrations were closely associated with the increased turbidity resulting from the storm flows. This association existed for all three types of turbidity plume movement - overflow, interflow, and underflow. As the turbidity plume moved down the reservoir, fecal coliform concentrations decreased due to die-off, settling, and dilution. With several assumptions, it is possible to use this information to assist in locating recreational sites in a reservoir or to anticipate possible body contact standard violations at existing recreation sites.     

Stress ethylene: A bioassay for rhizosphere-applied phytotoxicants

A bioassay for rhizosphere-applied phytotoxicants was developed and evaluated with a broad range of chemicals. Test substances were applied to the rhizosphere of whole, intact bush bean plants (Phaseolus vulgaris L. cv. Bush Blue Lake 290) grown in a solid support medium and the resultant ethylene production was measured to detect the presence of phytotoxic materials. The beans were encapsulated in plastic bags for 2 hr following treatment and then incubated for 24 hr in the dark. Ethylene and ethane accumulating within the bags were quantified via gas-solid chromatography. The application of various concentrations of inorganic and organic chemicals induced various responses. No single equation adequately described the dose-response curves; therefore, a critical value (a statistically significant increase in stress ethylene) was computed for each test substance. A phytotoxic-response threshold for each test substance was defined as the test-substance concentration that caused ethylene production to exceed its respective critical-value concentration. Based on threshold concentrations determined by analysis of stress ethylene production, the relative phytotoxicity rankings of the inorganic test substances were: CdCl₂>CuCl₂>Pb(C₂H₃O₂)₂>LiCl, while those of the organic test substances were 2,4-D esters>paraquat dichloride>1-butanol>2-propanone>2-propanol. Both stress ethylene and ethane production were nonresponsive to hydrogen-ion concentration (measured before application) over a broad pH range. However, significant ethane production was detected at pH 2 and stress ethylene was produced at pH 1. The measurement of stress-induced ethylene provides a rapid and simple means to determine the relative phytoxicity of rhizosphere-applied substances.     

Feeding biology of <Emphasis Type="Italic">Ophiura sarsii</Emphasis> Lütken, 1855 on Banquereau bank and the effects of fishing

Ophiura sarsii was collected in May/June from Banquereau Bank off Nova Scotia, Canada as part of the benthic fauna analyzed in a 2 year clam dredging-impact experiment. In total, 529 O. sarsii specimens were analyzed; 174 (33%) had stomach contents while the rest were empty. Ophiura sarsii is a trophic generalist feeding on at least 31 taxa (52% identified to species) drawn from four phyla: Arthropoda (81.8%), Annelida (13.2%), Mollusca (3%), and Cnidaria (1.5%). However, the diet was largely restricted to two amphipod families (Ampeliscidae and Lysianassidae), accounting for 54–70% of stomach contents at any one sampling period. This diet provides indirect evidence for carnivory. Limited spatial and temporal heterogeneity in the proportion of animals feeding showed no consistent pattern. Where diet composition differed (ANOSIM) it was attributed to the proportion of lysianassid and ampeliscid amphipods consumed. Dredging introduced new dietary items, although diet composition was not significantly altered.     

Environmental and health impacts from the introduction of improved wood stoves: evidence from a field experiment in Guatemala

Improved wood-burning stoves offer a possible solution that can simultaneously impact both problems of deforestation and problems of respiratory health in developing countries. We carried out a field experiment in which new fuel-efficient woodstoves were allocated in a Guatemalan village via the use of a lottery. A 2008 baseline survey was carried out on 2,148 individuals in 351 households, and then a follow-up survey was carried out in 2009, 4 months after households received the stoves. We found that households with the new stoves reduced wood consumption by an average of 59.1%. We also found indications of reductions in indoor air related health problems, where point estimates indicate a significant reduction in reported respiratory symptoms by 48.6% among women and 63.3% among children.     

The effect of a biofilm on solute diffusion in fractured porous media

At sites in fractured rock where contamination has been exposed to the rock matrix for extended periods of time, the amount of contaminant mass residing in the matrix can be considerable. Even though it may be possible to diminish concentrations by the advection of clean water through the fracture features, back diffusion from mass held in the matrix will lead to a continuing source of contamination. In such an event, the development of a biofilm (a thin film of microbial mass) on the wall of the fractures may act to limit or prevent the back diffusion process. The objective of this preliminary study is to explore the influence imparted by the presence of a biofilm on the process of matrix diffusion. The investigation was conducted using radial diffusion cells constructed from rock core in which biofilm growth was stimulated in a central reservoir. Once biofilms were developed, forward diffusion experiments were conducted in which a conservative solute migrated from the central reservoir into the intact rock sample. Diffusion experiments were performed in a total of 11 diffusion cell pairs where biofilm growth was stimulated in one member of the pair and inhibited in the other. The effect of the presence of a biofilm on tracer diffusion was determined by comparison of the diffusion curves produced by each cell pair. A semi-analytical model that accounts for the presence of a biofilm was used to investigate the effect of the biofilm on mass transfer due to changes in the effective porosity, effective diffusion coefficient, and the depth of penetration of the biofilm into the intact rock. The results show that the biofilm acted to plug the rock matrix, rather than forming a discrete layer on the reservoir surface. The reduction in effective porosity due to the biofilm ranged from 6% to 52% with the majority of the samples in the 30% to 50% range. Based on the present results, with more efficient biofilm stimulation, it is reasonable to assume that a more complete plugging of the microcrack porosity might be possible, leaving a much thicker and efficient barrier than could be achieved via a surface biofilm.     

Towards improved understanding of injury prevention program sustainability

As policy makers and funders have become more concerned with allocating scarce resources effectively, attention to the sustainability of health intervention programs has increased. However, the empirical knowledge base about factors facilitating or working against sustainability remains at an early stage. The aim of this study was to contribute to improved understanding of the conditions under which community-based injury prevention programs are most likely to attain sustainability. Ten Swedish community-based injury prevention programs were analysed with respect to factors that contribute to or detract from program sustainability. All the programs are integrated within existing municipality structures. Data were collected by means of semi-structured telephone interviews with key informants.The results suggested that different factors are interrelated, with no one factor being either primary or by itself sufficient for program sustainability. Financial, human, and relational resources lay the groundwork for the long-term operation of a program. The “integrated” program model appears to facilitate sustainability, but program intensity is vulnerable to changes in the financial status of the municipality and the priority-setting by municipality political decision makers. Sustainability may be compromised if a program becomes too dependent on a few key individuals. In contrast to financial, human, and relational resources, structural resources (e.g., injury surveillance and goals) appeared to have limited influence on sustainability. The programs were sustained with little evidence of effectiveness, resulting in limited feedback about how to improve a program in order to achieve and maintain long-term effectiveness.     

Assessment of the Conservation Measures Partnership's effort to improve conservation outcomes through adaptive management

Conservation practice has demonstrated an increasing desire for accountability of actions, particularly with respect to effectiveness, efficiency, and impact to clearly identified objectives. This has been accompanied by increased attention to achieving adaptive management. In 2002, practitioners representing several prominent conservation nongovernmental organizations (NGOs) launched a community of practice called the Conservation Measures Partnership (CMP). The partnership CMP has worked to establish standards of conservation practice to improve accountability of conservation actions through adaptive management. The focal organizing framework for CMP has been the Open Standards for the Practice of Conservation (OS). We evaluated, through an online survey and personal interviews, the first decade of CMP and the OS. The CMP has garnered a positive reputation among agencies, NGOs, and funders and has succeeded in developing a large user base of the OS. However, CMP has not fully achieved its goal of making the OS standard operating procedure for the largest NGOs (e.g., The Nature Conservancy, World Wildlife Fund), despite it being widely used within these organizations. This lack of institutionalization is attributable to multiple causes, including an increase in the number of partially overlapping decision‐support frameworks and challenges achieving full‐cycle adaptive management. Users strongly believed the OS fosters better conservation practice and highly valued the OS for improving their practice. A primary objective of the OS is to assist practitioners to achieve full‐cycle adaptive management to better integrate learning into improving the effectiveness and efficiency of actions. However, most practitioners had not yet achieved cycle completion for their projects. To improve the effectiveness of CMP, OS, and conservation practice in general, we recommend collaborative efforts among the proponents of multiple decision‐support frameworks to foster strong institutional adoption of a common set of adaptive‐management standards for conservation accountability.     

Greenhouse gases fluxes and soil thermal properties in a pasture in central Missouri

Fluctuations of greenhouse gases emissions and soil properties occur at short spatial and temporal scales, however, results are often reported for larger scales studies. We monitored CO2, CH4, and N2O fluxes and soil temperature (T), thermal conductivity (K), resistivity (R) and thermal di usivity (D) from 2004 to 2006 in a pasture. Soil air samples for determination of CO2, CH4 and N2O concentrations were collected from static and vented chambers and analyzed within two hours of collection with a gas chromatograph. T, K, R and D were measured in-situ using a KD2 probe. Soil samples were also taken for measurements of soil chemical and physical properties. The pasture acted as a sink in 2004, a source in 2005 and again a sink of CH4 in 2006. CO2 and CH4 were highest, but N2O as well as T, K and D were lowest in 2004. Only K was correlated with CO2 in 2004 while T correlated with both N2O (r = 0.76, p = 0.0001) and CO2 (r = 0.88, p = 0.0001) in 2005. In 2006, all gases fluxes were significantly correlated with T, K and R when the data for the entire year were considered. However, an in-depth examination of the data revealed the existence of month-to-month shifts, lack of correlation and di ering spatial structures. These results stress the need for further studies on the relationship between soil properties and gases fluxes. K and R o er a promise as potential controlling factors for greenhouse gases fluxes in this pasture.