The evaluation of electrical energy per order (E(Eo)) for photooxidative decolorization of four textile dye solutions by the kinetic model

Photooxidative decolorization of four textile dyestuffs, C.I. Acid Orange 7 (AO7), C.I. Acid Orange 8 (AO8), C.I. Acid Orange 52 (AO52) and C.I. Acid Blue 74 (AB74), by UV/H2O2 was investigated in a laboratory scale photoreactor equipped with a 15 W low pressure mercury vapour lamp. The decolorization of the dyes was found to follow pseudo-first-order kinetics, and hence the figure-of-merit electrical energy per order (E(Eo)) is appropriate for estimating the electrical energy efficiency. The E(Eo) values were found to depend on the concentration of H2O2, concentration and basic structure of the dye. This study shows that these textile dyes can be treated easily and effectively with the UV/H2O2 process with E(Eo) values between 0.4 and 5 kW h m-3 order-1, depending on the initial concentrations of dyes and H2O2. The kinetic model, based on the initial rates of degradation, provided good prediction of the E(Eo) values for a variety of conditions.     

Bioavailability of contaminants estimated from uptake rates into soil invertebrates

It is often argued that the concentration of a pollutant inside an organism is a good indicator of its bioavailability, however, we show that the rate of uptake, not the concentration itself, is the superior predictor. In a study on zinc accumulation and toxicity to isopods (Porcellio scaber) the dietary EC(50) for the effect on body growth was rather constant and reproducible, while the internal EC(50) varied depending on the accumulation history of the animals. From the data a critical value for zinc accumulation in P. scaber was estimated as 53 microg/g/wk. We review toxicokinetic models applicable to time-series measurements of concentrations in invertebrates. The initial slope of the uptake curve is proposed as an indicator of bioavailability. To apply the dynamic concept of bioavailability in risk assessment, a set of representative organisms should be chosen and standardized protocols developed for exposure assays by which suspect soils can be evaluated.     

The recovery of ammonia and hydrogen sulfide from ground-level area sources using dynamic isolation flux chambers: bench-scale studies

Controlled bench-scale laboratory experiments were conducted to evaluate the recovery of ammonia (NH3) and hydrogen sulfide (H2S) from dynamic isolation flux chambers. H2S (80-4000 ppb) and NH3 (5000-40,000 ppb) samples were diffused through the flux chamber to simulate ground level area source emissions while measuring the inlet and outlet flux chamber concentrations simultaneously. Results showed that the recovery of H2S during a 30-min sampling time was almost complete for concentrations >2000 ppb. At the lowest concentration of 80 ppb, 92.55% of the H2S could be recovered during the given sampling period. NH3 emissions exhibited similar behavior between concentrations of 5000-40,000 ppb. Within the 30-min sampling period, 92.62% of the 5000-ppb NH3 sample could be recovered. Complete recovery was achieved for concentrations >40,000 ppb. Predictive equations were developed for gas adsorption. From these equations, the maximum difference between chamber inlet and outlet concentrations of NH3 or H2S was predicted to be 7.5% at the lowest concentration used for either gas. In the calculation of emission factors for NH3 and H2S, no adsorption correction factor is recommended for concentrations >37,500 ppb and 2100 ppb for NH3 and H2S, respectively. The reported differences in outlet and inlet concentration above these ranges are outside the fullscale sensitivity of the gas sensing equipment. The use of 46-90 m of Teflon tubing with the flux chambers has apparently no effect on gas adsorption, because recovery was completed almost instantaneously at the beginning of the tests.     

The effects of perennial ryegrass and alfalfa on microbial abundance and diversity in petroleum contaminated soil

Enhanced rhizosphere degradation uses plants to stimulate the rhizosphere microbial community to degrade organic contaminants. We measured changes in microbial communities caused by the addition of two species of plants in a soil contaminated with 31,000 ppm of total petroleum hydrocarbons. Perennial ryegrass and/or alfalfa increased the number of rhizosphere bacteria in the hydrocarbon-contaminated soil. These plants also increased the number of bacteria capable of petroleum degradation as estimated by the most probable number (MPN) method. Eco-Biolog plates did not detect changes in metabolic diversity between bulk and rhizosphere samples but denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified partial 16S rDNA sequences indicated a shift in the bacterial community in the rhizosphere samples. Dice coefficient matrices derived from DGGE profiles showed similarities between the rhizospheres of alfalfa and perennial ryegrass/alfalfa mixture in the contaminated soil at week seven. Perennial ryegrass and perennial ryegrass/alfalfa mixture caused the greatest change in the rhizosphere bacterial community as determined by DGGE analysis. We concluded that plants altered the microbial population; these changes were plant-specific and could contribute to degradation of petroleum hydrocarbons in contaminated soil.     

Methane emission from lakes

A physico-chemical model to describe methane and carbon dioxide emission from lakes was developed. The model describes the emission by diffusion, bubbles and plants. The intensity of the fluxes can be calculated either for total or particular emission in dependence on gas bubbles composition. It was found, that diffusional (Q) and bubble (J) fluxes depend on the methane molar ratio (X) in bubbles as follows: [formula: see text]. The model allows to estimate the role of the methane oxidation by atmospheric oxygen in the total methane flux. It was shown, that the methane oxidation does not influence much methane fluxes to the atmosphere for most of the experimentally observed situations.     

Levels of dioxin-like compounds in sewage sludge determined with a bioassay based on EROD induction in chicken embryo liver cultures

A bioassay for the detection of dioxin-like compounds was used to estimate levels in sewage sludge from Swedish sewage treatment plants (STPs). The sludge extracts were HPLC-separated into three fractions containing a) monoaromatic/aliphatic, b) diaromatic (e.g. polychlorinated biphenyls [PCBs], polychlorinated dibenzodioxins and polychlorinated dibenzofurans [PCDDs/Fs]), and c) polyaromatic compounds (e.g. polycyclic aromatic hydrocarbons [PAHs]). The bioassay, which is based on EROD (7-ethoxyresorufin O-deethylase) induction in cultured chicken embryo livers detected dioxin-like activity in all unfractionated extracts and in the di- and polyaromatic fractions of all sludge extracts, but not in the monoaromatic/aliphatic fractions. The levels ranged between 6 and 109 pg bio-TEQ/g sludge (d.w.). In sediment samples from rural lakes in Sweden, levels of about 5 pg bio-TEQ/g (d.w.) have been found. The polyaromatic fractions of the sludge samples were potent in the bioassay, probably due to various PAHs and other polyaromatics in the sludge. The levels of six PAHs that are screened for in the sludge at Swedish STPs accounted for only 3-10% of the observed EROD-induction by the polyaromatic fractions. Consequently, many other polyaromatic EROD-inducing compounds were present in the sludge. Inclusion of a biological test like the chicken embryo liver bioassay in the screening of sludge would improve the ability to detect the presence of bioactive dioxin-like compounds. A theoretical estimation of bio-TEQ concentrations in farm-soil following long-term application of sludge with bio-TEQ concentrations similar to those observed in this investigation indicated that the bio-TEQ levels in soil would increase very slowly over time. The chicken embryo liver bioassay proved useful in assessing levels of dioxin-like compounds in sewage sludge and it gives valuable complementary information to chemical analysis data.     

Determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments.

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean-up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean-up for sediment extract was carried out on a 10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL. The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'-DDT and endosulfan sulphate, which was 0.01 mg/kg. The detection limit for organochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 microgram/kg and for organophosphate pesticides less than 10 micrograms/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Measurements of peroxyacyl nitrates (PANS) in Mexico City: implications for megacity air quality impacts on regional scales

Peroxyacyl nitrates (PANs) were measured using gas chromatography with electron capture detection (GC/ECD) in north central Mexico City during February–March of 1997. Peroxyacetyl nitrate (PAN) was observed to exceed 30 ppb during five days of the study, with peroxypropionyl nitrate (PPN) and peroxybutryl nitrate (PBN) reaching 6 and 1 ppb maximum, respectively. Levels of total PANs typically exceeded 10 ppb during the period of measurement and showed a very strong diurnal variation with PANs maximum during the early afternoon and falling to less than 0.1 ppb during the evening hours. These levels of PANs are the highest reported values in North America (and the world) for an urban center, since levels of approximately 30 ppb were reported during the late 1970s in the Los Angeles area (South Coast Air Basin, Tuazon et al., 1978). Hydrocarbon measurements indicate that the levels of olefins, specifically butenes are significant in Mexico City. A time series taken of source indicator hydrocarbons taken before and during a Mexican National Holiday with reduced automobile traffic clearly show that mobile sources of butenes are as important as liquefied petroleum gas. Observations of 10–40 ppb C methyl-t-butyl ether (MTBE) are consistent with MTBE/gasoline fuel usage as a source of isobutene and formaldehyde. Both these reactive species can lead to increased oxidant and PAN formation. The strong diurnal profiles of PANs are consistent with regional clearing of the Mexico City air basin on a daily basis. Estimates are given using a simple box model calculation for a number of key primary and secondary pollutant emissions from this megacity on an annual basis. These calculations indicate that megacities can be important sources of both primary and secondary pollutants, and that PANs produced in megacity environments are likely to contribute strongly to regional scale ozone and aerosol productions during long range transport.     

Simulation of pesticide runoff at Rosemaund Farm (UK) using the SoilFug model

A validation exercise of the SoilFug model using field runoff data from Rosemaund Farm (UK) is described. A comparison has been made of modelled and measured concentrations of several pesticides in surface water and soil during and after specific rain events following application. The field experiments were designed to obtain data on rainfall, outflows of water, pesticide application rates and concentrations in soil and water. The results were satisfactory for the undissociated pesticides (atrazine, carbofuran, dimethoate, isoproturon, lindane, simazine and trifluralin), whose concentrations in water were mostly predicted within an order of magnitude of measured data. The results for the dissociated pesticides (dichlorprop, MCPA, mecoprop) were less satisfactory, giving generally much higher predicted concentrations in water. The use of the SoilFug model is suggested for the calculation of predicted environmental concentrations (PECs) in water, since it generally produces acceptable results from a relatively small set of input data, most of which is generally available.     

Comparison of calculated and measured foliar O3 flux in crop and forest species

We designed a new gas exchange system that concurrently measures foliar H2O, O3, and CO2 flux (HOC flux system) while delivering known O3 concentrations. Stomatal responses of three species were tested: snapbean, and seedlings of California black oak (deciduous broadleaf) and blue oak (evergreen broadleaf). Acute O3 exposure (120-250 ppb over an hour) was applied under moderate light and low vapor pressure deficits during near steady state conditions. The rate of stomatal closure was measured when the whole plant was placed in the dark. An adjacent leaf on each plant was also concurrently measured in an O3-free cuvette. Under some conditions, direct measurements and calculated foliar O3 flux were within the same order of magnitude; however, endogenously low gs or O3 exposure-induced depression of gs resulted in an overestimation of calculated O3 fluxes compared with measured O3 fluxes. Sluggish stomata in response to light extinction with concurrent O3 exposure, and incomplete stomatal closure likewise underestimated measured O3 flux.