Indoor and outdoor air pollution and lung cancer in New Hampshire and Vermont

Indoor and outdoor air pollution is known to contribute to increased lung cancer incidence. This study is the first to address the contribution of home heating fuel and geographical course particulate matter (PM₁₀) concentrations to lung cancer rates in New Hampshire, USA. First, Pearson correlation analysis and geographically weighted regression were used to investigate spatial relationships between outdoor PM₁₀ and lung cancer rates. While the aforementioned analyses did not indicate a significant contribution of PM₁₀ to lung cancer in the state, there was a trend towards a significant association in the northern and southwestern regions of the state. Second, case-control data were used to estimate the contributions of indoor pollution and secondhand smoke to the risk of lung cancer with adjustment for confounders. Increased risk was found among those who used wood or coal to heat their homes for more than 10 winters before the age of 18, with a significant increase in risk per winter. Resulting data suggest that further investigation of the relationship between heating-related air pollution levels and lung cancer risk is needed.     

Soil sensitivity to acidification in Asia: status and prospects

Exceedance of steady-state critical loads for soil acidification is consistently found in southern China and parts of SE Asia, but there is no evidence of impacts outside of China. This study describes a methodology for calculating the time to effects for soils sensitive to acidic deposition in Asia under potential future sulfur (S), nitrogen (N), and calcium (Ca) emission scenarios. The calculations are matched to data availability in Asia to produce regional-scale maps that provide estimates of the time (y) it will take for soil base saturation to reach a critical limit of 20% in response to acidic inputs. The results show that sensitive soil types in areas of South, Southeast, and East Asia, including parts of southern China, Burma, Hainan, Laos, Thailand, Vietnam, and the Western Ghats of India, may acidify to a significant degree on a 0-50 y timescale, depending on individual site management and abiotic and biotic characteristics. To make a clearer assessment of risk, site-specific data are required for soil chemistry and deposition (especially base cation deposition); S and N retention in soils and ecosystems; and biomass harvesting and weathering rates from sites across Asia representative of different soil and vegetation types and management regimes. National and regional assessments of soils using the simple methods described in this paper can provide an appreciation of the time dimension of soil acidification-related impacts and should be useful in planning further studies and, possibly, implementing measures to reduce risks of acidification.     

PAHs in background soils from Western Europe: influence of atmospheric deposition and soil organic matter

The levels and distribution of polynuclear aromatic hydrocarbons (PAHs) were determined in soil samples from background locations in the UK and Norway, to investigate their spatial distribution and the controlling environmental factors. Concentrations ranged between 42 and 11200 microg kg(-1) (geometric mean 640 microg kg(-1)) and 8.6 and 1050 microg kg(-1) (150 microg kg(-1)) dry weight in the UK and Norwegian soil, respectively. Proximity to sources and locations susceptible to high atmospheric depositional inputs resulted in higher concentrations. Statistically significant relationships were observed between PAH and total organic carbon (TOC) in the Norwegian samples. High molecular weight PAHs correlated with black carbon (BC) in UK-woodland soil. These observations support the hypothesis that TOC plays an important role in the retention of PAHs in soil and that PAHs are often combined with BC during combustion emissions. PAHs with 4 and more rings comprised approximately 90% of total PAHs in the UK soil, but only 50% in the Norwegian soil. The mixture of PAHs implied that fractionation occurred during long-range atmospheric transport and deposition. The lighter PAHs with lower K(ow) values more readily reached the most remote sites. The heavier PAHs with higher K(ow) values remained in closer proximity to sources.     

Relationships between organic matter, black carbon and persistent organic pollutants in European background soils: Implications for sources and environmental fate

Black carbon (BC) and total organic carbon (TOC) contents of UK and Norwegian background soils were determined and their relationships with persistent organic pollutants (HCB, PAHs, PCBs, co-planar PCBs, PBDEs and PCDD/Fs) investigated by correlation and regression analyses, to assess their roles in influencing compound partitioning/retention in soils. The 52 soils used were high in TOC (range 54-460 mg/g (mean 256)), while BC only constituted 0.24-1.8% (0.88%) of the TOC. TOC was strongly correlated (p < 0.001) with HCB, PCBs, co-PCBs and PBDEs, but less so with PCDD/Fs (p < 0.05) and PAHs. TOC explained variability in soil content, as follows: HCB, 80%; PCBs, 44%; co-PCBs, 40%; PBDEs, 27%. BC also gave statistically significant correlations with PBDEs (p < 0.001), co-PCBs (p < 0.01) and PCBs, HCB, PCDD/F (p < 0.05); TOC and BC were correlated with each other (p < 0.01). Inferences are made about possible combustion-derived sources, atmospheric transport and air-surface exchange processes for these compounds.     

First trimester maternal serum placenta growth factor (PIGF)concentrations in pregnancies with fetal trisomy 21 or trisomy 18

Placenta growth factor (PIGF), an angiogenic factor belonging to the vascular endothelial growth factor family, pregnancy-associated plasma protein A (PAPP-A) and free β-human chorionic gonadotrophin (β-hCG) were measured in maternal serum from 45 pregnancies with trisomy 21, 45 with trisomy 18 and 493 normal controls at 10–13 completed weeks of gestation. In the normal pregnancies maternal serum PIGF levels increased exponentially with gestation. The median multiple of the median (MoM) PIGF concentration in the trisomy 21 group (1.26 MoM) was significantly higher (p<0.0001) than in the control group (1.00 MoM). In the trisomy 18 group the median PIGF was lower (0.889 MoM) but this did not quite reach significance (p=0.064). The corresponding median MoM values for PAPP-A were 1.00 MoM for the controls, 0.49 MoM for trisomy 21 and 0.16 MoM for trisomy 18. The median MoM values for free β-hCG were 1.00 MoM for the controls, 2.05 MoM for trisomy 21 and 0.38 MoM for trisomy 18. In the control group there was a small but significant correlation of PIGF with free β-hCG (r=+0.1024) and PAPP-A (r=+0.2288). In the trisomy 18 group there was a significant association between PIGF and free β-hCG (r=+0.2629) but not with PAPP-A (r=+0.0038). In the trisomy 21 group there was a small but significant association with PAPP-A (r=+0.1028) but not with free β-hCG (r=+0.0339). The separation of affected and unaffected pregnancies in maternal serum PIGF is small, and therefore it is unlikely that measurement of PIGF would improve screening for these abnormalities provided by the combination of fetal nuchal translucency and maternal serum PAPP-A and free β-hCG. Copyright © 2001 John Wiley & Sons, Ltd.     

Between pregnancy biological variability of first trimester markers of Down syndrome: implications for screening in subsequent pregnancies

In a group of 149 women who had undergone routine first trimester screening using fetal nuchal translucency thickness (NT) and maternal serum free β-hCG and pregnancy associated plasma protein-A (PAPP-A) in two consecutive pregnancies the within person between pregnancy biological variability of these markers has been assessed. For fetal NT there was no correlation between NT MoM in the first and second pregnancy (r=0.0800). For maternal serum free β-hCG MoM a significant correlation was observed (r=0.4174) as was also found for PAPP-A MoM (r=0.3270). The implications for such between pregnancy marker association is that women who have an increased risk of Down syndrome in their first pregnancy are 1.5–2 times more likely to repeat this event in their next pregnancy. This observation may be useful in counselling women in the first trimester screening of a subsequent pregnancy. Copyright © 2001 John Wiley & Sons, Ltd.     

Using variance components to estimate power in a hierarchically nested sampling design

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey’s power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.