Biomarker responses of <Emphasis Type="Italic">Peromyscus leucopus</Emphasis> exposed to lead and cadmium in the Southeast Missouri Lead Mining District

Biomarker responses and histopathological lesions have been documented in laboratory mammals exposed to elevated concentrations of lead and cadmium. The exposure of white-footed mice (Peromyscus leucopus) to these metals and the potential associated toxic effects were examined at three contaminated sites in the Southeast Missouri Lead Mining District and at a reference site in MO, USA. Mice from the contaminated sites showed evidence of oxidative stress and reduced activity of red blood cell δ-aminolevulinic acid dehydratase (ALAD). Histological examinations of the liver and kidney, cytologic examination of blood smears, and biomarkers of lipid peroxidation and DNA damage failed to show indications of toxic effects from lead. The biomagnification factor of cadmium (hepatic concentration/soil concentration) at a site with a strongly acid soil was 44 times the average of the biomagnification factors at two sites with slightly alkaline soils. The elevated concentrations of cadmium in the mice did not cause observable toxicity, but were associated with about a 50% decrease in expected tissue lead concentrations and greater ALAD activity compared to the activity at the reference site. Lead was associated with a decrease in concentrations of hepatic glutathione and thiols, whereas cadmium was associated with an increase. In addition, to support risk assessment efforts, we developed linear regression models relating both tissue lead dosages (based on a previously published a laboratory study) and tissue lead concentrations in Peromyscus to soil lead concentrations.     

Market potential of biomethane as alternative transportation fuel in South Korea

This study estimated domestically available energy amount of biomethane including landfill gas (LFG) as a transportation fuel by 2035. The amount of available energy that could be supplied was predicted through four stages of ‘theoretical-’, ‘geographical-’, ‘technical-’, and ‘market potential’ by considering geographical, technical, economic conditions, etc. Energy efficiency and added value of biomethane are largely influenced by the site conditions and the neighboring infrastructures. So, how much of the natural gas used in transportation could be substituted with biomethane was examined by setting limits to the amount of organic wastes generated within urban areas. As a result, the market potential of biomethane including landfill gas was approximately 331 × 10⁶ Nm³/year, corresponding to 25% of the natural gas supply for transportation, which could be replaced by biomethane. Assuming that 2% of natural gas for transportation is replaced by biomethane, it corresponds to 29 × 10⁶ Nm³/year (approximately 9% of market potential of biomethane). However, RFS annual mixing rate may be increased upon introduction and the growth rate of the natural gas supply for transport would be higher than that of market potential of biomethane calculated in this study.     

Effect of substrate feeding frequencies on the methane production and microbial communities of laboratory-scale anaerobic digestion reactors

Even though full-scale digesters have been designed based on laboratory-scale tests, the substrate feeding modes of laboratory-scale tests might be different from those of full-scale digesters. The effect of substrate feeding frequencies on the performance and microbial community of laboratory-scale anaerobic digestion reactors was investigated. Feeding frequencies of twice a day, once a day, and every two days were tested in three 2-L reactors with an organic loading rate of 0.5 g-glucose/L/day under mesophilic condition. According to the results of this study, all the reactors showed similar methane production rates and SCOD removal efficiencies after sufficient time of acclimation, but frequently feeding promoted more stable digestion. Although there was no significant difference in microbial diversities from pyrosequencing analyses, the changes of archaeal community composition were observed. The decrease in feeding frequency appeared to cause shifts from acetoclastic methanogens affiliated with Methanosaeta to H₂-utilizing methanogens. The increase of Methanosaeta at a frequently feeding might contribute to the stability of reactor operation. Since this study uses glucose as the substrate, there is still possibility of different results for more complex substrates, such as sludge, food waste, etc.     

Are neoliberalist behaviours reflective of bullying? New perspectives on influences on sustainability and global citizenship

The global sustainability crisis facing humanity is a cultural crisis with neoliberal culture, the primary driver. The necessity for global change away from neoliberal systems is well established with cultural systems pursued through sustainability seen as the most viable options to alleviate this global crisis. Whilst the goals of neoliberalism and sustainability are systemic and universal, those implementing them work at a specific level with individuals, groups and/or collectives. The literature fails, however, to provide specific examples of why, on a practical level, social change agents often struggle to implement sustainability goals. One of the primary reasons for these struggles can be found in an examination of human behaviour, for instance personality types, group dynamics and/or interpersonal or group communication skills (or lack thereof). This exploratory paper will investigate the existence of a nexus between neoliberalist and adult bullying behaviours to initiate discussion on the barriers this combination may have on social change for sustainability and global citizenship. This examination is warranted as the propensity in the neoliberalist system to support the use of bullying behaviours by its advocates is a complex, nuanced and underresearched topic. There are implications here for policy development, social and urban planning, education and governance for sustainability and global citizenship.     

Evaluating the impact of green roof evapotranspiration on annual building energy performance

The performance of the building envelope predominantly determines the ultimate energy performance throughout the lifecycle of a building. A sustainable alternative to enhance roof performance while limiting heat flux through a roof is integrating passive techniques such as green roof. Particularly, green roof performance is sensitive to local climate. The main objective of this study was to evaluate the evapotranspiration effect of an extensive green roof on annual energy consumption of an office building in relation to the humid continental climate of Republic of Korea. The dynamic behavior of green roof and building energy performance were investigated through a parametric simulation method using green roof module in EnergyPlus coupled with jEPlus. Structural data of the reference building and ASHARE 90.1-2007 operational schedules were used as inputs for baseline building model while inputs for the green roof module were based on experimental data sets. Due to the influence of the humid conditions and local wind current on the evapotranspiration process, it was generally found that high leaf area index (LAI) reduced cooling energy demand and somewhat reduced heating energy demand as well; corresponding to the highest daily evapotranspiration fluxes of 4.79 mm day^?1 in summer and 1.80 mm day^?1 in winter. Increasing LAI from 20% to 100% cover increased evapotranspiration flux by 10.4% in summer and 80.2% in winter. Thus to minimize energy losses in winter, foliage cover must be carefully considered. Within limitations specified, the overall annual building energy consumption deceased by 90.9 GJ (3.7%).     

Characterization of dried sewage sludge for co-firing in coal power plant by using thermal gravimetric analysis

This research studied the characteristics of dried sewage sludge using TGA to co-fire dried sewage sludge with coal in power plants. The sewage sludges that were discharged from Daejeon, Korea were dried and examined fundamental properties to use them as a fuel. Also, the properties of bituminous coal and wood pellet, which are used in domestic coal power plants, were analyzed and compared with them of sewage sludges and non-isothermal analyses of dried sewage sludges were performed at the heating rates of 5, 10, 20, and 30C /min using TG analyzer to investigate the basic combustion characteristics. As a results of these TGA/DTG analyses, sewage sludges showed its primary peak at the temperature of 250–500?°C, which overlapped with main peak of wood and secondary peak at around 500–600?°C, which overlapped with main peak of coals. Also for the interpretation by Friedman method, the activation energies in the section of highest weight loss were 525.16 kJ/mole for dried digested sewage sludge, 544.88 kJ/mole for dried excess sewage sludge, 203.86 kJ/mole for wood pellet and 146.4585 kJ/mole for bituminous coal. The reaction orders for dried digested excess sewage sludge, dried excess sewage sludge, wood pellet and bituminous coal were 28.775, 24.319, 18.398 and 9.1005, respectively, and the frequency factors were 5.89?\(\times \hspace{0.17em}\)10²⁸, 1.65?\(\times \hspace{0.17em}\)10^24,, 9.59?\(\times \hspace{0.17em}\)10¹⁶ and 1.77?\(\times \hspace{0.17em}\)10⁸ for each, respectively.     

Characterizations of biochar from hydrothermal carbonization of exhausted coffee residue

The aim of this study was to produce renewable energy from exhausted coffee residue, which is a form of biomass. As coffee preference continues to increase, the importation of coffee beans has been increasing sharply. However, the amount of coffee that is actually consumed is only about 0.2% of coffee beans, while the spent coffee beans are discarded in the form of exhausted coffee residue. Hydrothermal carbonization is a method of producing an improved fuel from renewable energy sources by changing the physical and chemical properties of biochars. Biochars were obtained from a variety of reaction temperatures during hydrothermal carbonization and analyzed using elemental analysis, ultimate analysis, and calorific value measurement. The atomic C/O and C/H ratios of all obtained biochars decreased and were found to be similar to those of lignite and sub-bituminous coal. The highest energy recovery efficiency of biochar indicates that the optimum reaction temperature for hydrothermal carbonization was between 210 and 240 °C, which produced biochars with calorific value of approximately 26–27 MJ/kg. The spectra of biochars obtained from Fourier transform infrared spectroscopy (FTIR) showed fewer C–O and aliphatic C–H functional groups, but more carbonyl C=O functional groups and aliphatic CH _x groups. The results of this study indicate that hydrothermal carbonization can be used as an effective means to generate highly energy-efficient renewable fuel resources from coffee residue. The thermogravimetric analysis provided the changing combustion characteristics due to increased fixed carbon content.     

Comprehensive modeling of HFC-23 incineration in a CDM incinerator

Considering that a significant part of used refrigerants have to be destroyed in an environmentally friendly manner together with the high global warming potential (GWP) of HFCs (hydrofluorocarbons), the development of a proper incineration method of HFCs becomes one of the viable methods in the refrigeration and air-conditioning industry. To this end, in this study, the development of a comprehensive modeling of CHF₃ (HFC-23 or R-23) incineration is made to assist in the proper design and determination of optimal operating condition of a practical HFCs incinerator, since the refrigerant of CHF₃ is one of typical HFCs. For this, numerical investigation was performed by the development of a predictive model for the thermal destruction of the CHF₃ using CH₄–air flames in an incinerator designed for CDM (clean development mechanism) project. First of all, comparison between calculation and operation data was made to evaluate the program developed in this study. Numerical calculation of CHF₃–CH₄–air flame predicts successfully the operation data of a CDM incinerator such as temperature, CHF₃ destruction rate more than 99.99 % and other species concentrations such as CO and NO at the exit of the incinerator. Further parametric study was performed also in terms of important variables such as excess air, amount of steam and incinerator size. In general, the results obtained appear physically acceptable and give a clear physical insight into the role of the important variables. Further work is strongly recommended for the development of a general turbulent reaction model for the thermal destruction of HFCs, especially for the condition of non-equilibrium turbulent reaction dominance.     

Sequential production of pyrolytic oil and biodiesel from oil-bearing biomass

Oil extraction from the oil-bearing biomass and waste materials has been considered as one of the biggest challenges in the biodiesel production process because it has been considered as the most energy- and cost-demanding step. This work provides a promising approach for the direct transformation without oil extraction from calcined montmorillonite clay (CMC) and microalgae by means of the non-catalytic thermo-chemical process in conjunction with the real continuous flow system. The introduced method showed the high tolerance of water, impurities, and free fatty acids (FFAs), which enable the combination of the esterification of FFAs and transesterification of triglycerides into a single step without the lipid extraction. For example, this study showed that the maximum achievable yield of biodiesel via the introduced methodology was 97 ± 0.5 % at the temperature regime of 380–480 °C and this biodiesel yield was enhanced in the presence of CO₂. Thus, the introduced methodology for producing biodiesel could be an alternative way of the methanol liquefaction and transesterification under supercritical conditions.