Irrigation system and land use effect on surface water quality in river, at lake Dianchi, Yunnan, China

The surface water samples were collected in river Dahe and its tributaries, which flow into severely eutrophic lake Dianchi, Yunnan Province, China, in order to elucidate factors controlling water quality fluctuations. The temporal and spatial distribution of water quality tendency was observed. The water quality of each river is dependent on the hydrology effect such water gate and circulating irrigation system. We must consider the hydrology effect to accurately understand water quality variations of river in this study field. In river without highly circulating irrigation system or water gate effect, the downstream nitrate nitrogen (NO₃-N) concentration increase occurred in area dominated by open field cultivation, whereas the NO₃-N concentration was constant or decreased in area dominated by greenhouse land use. This result suggests that greenhouse covers the soil from precipitation, and nitrate load of greenhouse could be less than that of open field cultivation while the rainfall event. In the upper reaches of river, where is dominated by open field cultivation, there were no sharp increase dissolved molybdate reactive phosphorus and total phosphorus concentration, but P load was accumulated in the lower reaches of river, whose predominant land use is greenhouse. Although the P sources is unclear in this study, greenhouse area may have potential of P loads due to its high P content in greenhouse soil. Considering hydrology effect is necessary to determine what the major factor is influencing the water quality variation, especially in area with highly complicated irrigation system in this studying site.     

Sulfur deposition simulations over China, Japan, and Korea: a model intercomparison study for abating sulfur emission

In response to increasing trends in sulfur deposition in Northeast Asia, three countries in the region (China, Japan, and Korea) agreed to devise abatement strategies. The concepts of critical loads and source?Creceptor (S?CR) relationships provide guidance for formulating such strategies. Based on the Long-range Transboundary Air Pollutants in Northeast Asia (LTP) project, this study analyzes sulfur deposition data in order to optimize acidic loads over the three countries. The three groups involved in this study carried out a full year (2002) of sulfur deposition modeling over the geographic region spanning the three countries, using three air quality models: MM5-CMAQ, MM5-RAQM, and RAMS-CADM, employed by Chinese, Japanese, and Korean modeling groups, respectively. Each model employed its own meteorological numerical model and model parameters. Only the emission rates for SO₂ and NO_x obtained from the LTP project were the common parameter used in the three models. Three models revealed some bias from dry to wet deposition, particularly the latter because of the bias in annual precipitation. This finding points to the need for further sensitivity tests of the wet removal rates in association with underlying cloud?Cprecipitation physics and parameterizations. Despite this bias, the annual total (dry plus wet) sulfur deposition predicted by the models were surprisingly very similar. The ensemble average annual total deposition was 7,203.6?±?370 kt S with a minimal mean fractional error (MFE) of 8.95?±?5.24?% and a pattern correlation (PC) of 0.89?C0.93 between the models. This exercise revealed that despite rather poor error scores in comparison with observations, these consistent total deposition values across the three models, based on LTP group's input data assumptions, suggest a plausible S?CR relationship that can be applied to the next task of designing cost-effective emission abatement strategies.     

Effect of organic suspended solids and their sedimentation on the surrounding sea area

A study of sediment contamination was made in one of the 23 specific designated important ports in Japan, the inner part of which had been used as wood pool. The study focused on the relationship between contaminants and organic matter in terms of ignition loss and the impact of the wood pool on the port area. Organic matter exists in the form of suspended solids and deposits. Sediment samples were taken from the mouths of the rivers feeding into Shimizu Port, from the wood pool and from Shimizu Port. Samples within Shimizu Port showed that as the ignition loss decreased with distance from the wood pool, other properties including the concentrations of trace metals, ignition loss and sulfide content also decreased with the distance. In conclusion, Shimizu Port seems to function as a buffer area between the wood pool and Suruga Bay.     

Effects of whole spine alignment patterns on neck responses in rear end impact

Objective: The aim of this study was to investigate the whole spine alignment in automotive seated postures for both genders and the effects of the spinal alignment patterns on cervical vertebral motion in rear impact using a human finite element (FE) model.

Methods: Image data for 8 female and 7 male subjects in a seated posture acquired by an upright open magnetic resonance imaging (MRI) system were utilized. Spinal alignment was determined from the centers of the vertebrae and average spinal alignment patterns for both genders were estimated by multidimensional scaling (MDS). An occupant FE model of female average size (162 cm, 62 kg; the AF 50 size model) was developed by scaling THUMS AF 05. The average spinal alignment pattern for females was implemented in the model, and model validation was made with respect to female volunteer sled test data from rear end impacts. Thereafter, the average spinal alignment pattern for males and representative spinal alignments for all subjects were implemented in the validated female model, and additional FE simulations of the sled test were conducted to investigate effects of spinal alignment patterns on cervical vertebral motion.

Results: The estimated average spinal alignment pattern was slight kyphotic, or almost straight cervical and less-kyphotic thoracic spine for the females and lordotic cervical and more pronounced kyphotic thoracic spine for the males. The AF 50 size model with the female average spinal alignment exhibited spine straightening from upper thoracic vertebra level and showed larger intervertebral angular displacements in the cervical spine than the one with the male average spinal alignment.

Conclusions: The cervical spine alignment is continuous with the thoracic spine, and a trend of the relationship between cervical spine and thoracic spinal alignment was shown in this study. Simulation results suggested that variations in thoracic spinal alignment had a potential impact on cervical spine motion as well as cervical spinal alignment in rear end impact condition.     

SEIB–DGVM: A new Dynamic Global Vegetation Model using a spatially explicit individual-based approach

We report the development of a new spatially explicit individual-based Dynamic Global Vegetation Model (SEIB–DGVM), the first DGVM that can simulate the local interactions among individual trees within a spatially explicit virtual forest. In the model, a sample plot is placed at each grid box, and then the growth, competition, and decay of each individual tree within each plot is calculated by considering the environmental conditions for that tree as it relates to the trees that surround it. Based on these parameters only, the model simulated time lags between climate change and vegetation change. This time lags elongated when original biome was forest, because existing trees prevent newly establish trees from receiving enough sunlight and space to quickly replace the original vegetation. This time lags also elongated when horizontal heterogeneity of sunlight distribution was ignored, indicating the potential importance of horizontal heterogeneity for predicting transitional behavior of vegetation under changing climate. On a local scale, the model reproduced climate zone-specific patterns of succession, carbon dynamics, and water flux, although on a global scale, simulations were not always in agreement with observations. Because the SEIB–DGVM was formulated to the scale at which field biologists work, the measurements of relevant parameters and data comparisons are relatively straightforward, and the model should enable more robust modeling of terrestrial ecosystems.     

Partitioning between soluble and insoluble fractions of major and trace elements in size-classified airborne particulate matter collected in Tokyo

Airborne particulate matter (APM) is a major air pollutant, and the effect on human health of fine APM (PM2.5) deposited deep inside the lungs has recently become a serious concern. Moreover, soluble constituents may leach from APM, and intensify some health disorders. To identify the soluble chemical constituents of APM, size-classified APM was sampled in central Tokyo, and the elemental compositions of the water-soluble, acid-soluble and insoluble fractions were investigated. The extraction procedure was validated by calculating the mass balance of soluble and insoluble fractions of a standard APM reference material (NIST SRM 1648). Among the major elements, Fe and Ti in APM of all size classes and K in coarse APM were distributed primarily in the insoluble fraction and were inferred to be present as oxides or silicates, whereas Na and Mg in all size classes and K in fine APM were primarily in the water-soluble fraction and were inferred to be have originated mainly from sea salt. Among the trace elements, Zn and Cd in the fine APM (d < 2 microm) had large enrichment factors, indicating an anthropogenic origin, and were distributed primarily in the water-soluble fraction. When fine anthropogenic APM enters into the lungs, leached toxic elements, such as Cd, may adversely affect health. The higher the bonding energy of the monoxide molecule of the element was, the higher its distribution ratio was in the water-soluble fraction. Therefore, many metallic elements in APM were inferred to be present as oxygen-bonded compounds.     

Steel slag quality control for road construction aggregates and its environmental impact: case study of Vietnamese steel industry—leaching of heavy metals from steel-making slag

Environmental Science and Pollution Research - Steel slag is an industrial by product of steel manufacturing processes and has been widely utilized within civil and construction materials for road...