Seasonal and long-term trends in atmospheric PAH concentrations: evidence and implications

Atmospheric monitoring data for selected polynuclear aromatic hydrocarbons (PAHs) were compiled from remote, rural and urban locations in the UK, Sweden, Finland and Arctic Canada. The objective was to examine the seasonal and temporal trends, to shed light on the factors which exert a dominant influence over ambient PAH levels. Urban centres in the UK have concentrations 1-2 orders of magnitude higher than in rural Europe and up to 3 orders of magnitude higher than Arctic Canada. Interpretation of the data suggests that proximity to primary sources 'drives' PAH air concentrations. Seasonality, with winter (W) > summer (S), was apparent for most compounds at most sites; high molecular weight compounds (e.g. benzo[a]pyrene) showed this most clearly and consistently. Some low molecular weight compounds (e.g. phenanthrene) sometimes displayed S>W seasonality at some rural locations. Strong W>S seasonality is linked to seasonally-dependent sources which are greater in winter. This implicates inefficient combustion processes, notably the diffusive domestic burning of wood and coal. However, sometimes seasonality can also be strongly influenced by broad changes in meteorology and air mass origin (e.g. in the Canadian Arctic). The datasets examined here suggest a downward trend for many PAHs at some sites, but this is not apparent for all sites and compounds. The inherent noise in ambient air monitoring data makes it difficult to derive unambiguous evidence of underlying declines, to confirm the effectiveness of international source reduction measures.     

Chemical characterisation of particulate matter in urban transport modes

Traffic is a main source of air pollutants in urban areas and consequently daily peak exposures tend to occur during commuting. Personal exposure to particulate matter (PM) was monitored while cycling and travelling by bus, car and metro along an assigned route in Lisbon (Portugal), focusing on PM2.5 and PM10 (PM with aerodynamic diameter <2.5 and 10 µm, respectively) mass concentrations and their chemical composition. In vehicles, the indoor-outdoor interplay was also evaluated. The PM2.5 mean concentrations were 28?±?5, 31?±?9, 34?±?9 and 38?±?21?µg/m³ for bus, bicycle, car and metro modes, respectively. Black carbon concentrations when travelling by car were 1.4 to 2.0 times higher than in the other transport modes due to the closer proximity to exhaust emissions. There are marked differences in PM chemical composition depending on transport mode. In particular, Fe was the most abundant component of metro PM, derived from abrasion of rail-wheel-brake interfaces. Enhanced concentrations of Zn and Cu in cars and buses were related with brake and tyre wear particles, which can penetrate into the vehicles. In the motorised transport modes, Fe, Zn, Cu, Ni and K were correlated, evidencing their common traffic-related source. On average, the highest inhaled dose of PM2.5 was observed while cycling (55 µg), and the lowest in car travels (17 µg). Cyclists inhaled higher doses of PM2.5 due to both higher inhalation rates and longer journey times, with a clear enrichment in mineral elements. The presented results evidence the importance of considering the transport mode in exposure assessment studies.     

Groundwater risk assessment at a heavily industrialised catchment and the associated impacts on a peri-urban wetland

Industrial and agricultural activities often impose significant pressures to the groundwater quality and consequently degrade wetland ecosystems that depend mostly on subsurface water flow. Groundwater vulnerability and risk mapping is a widely used approach to assess the natural protection of aquifers and the associated pollution potential from human activities. In the particular study, the relatively new Pan-European methodology (COP method) has been applied in a highly industrialized peri-urban wetland catchment, located close to Athens city, to map the intrinsic vulnerability of the aquifer and evaluate the risk potential originating from local land uses. Groundwater analysis results for various parameters, including Phenols, PCBs and nutrients, have been used to validate the vulnerability and risk estimations while a biological assessment occurred to associate the mapping results with the wetland's ecological status. The results indicated that even though the natural protection of the aquifer is relatively high due to the dominant hydrogeologic and geomorphologic conditions, the groundwater pollution risk is considerable, mainly because of the existing hazardous land uses. The water quality of the groundwater accredited these findings and the ecological status of this peri-urban wetland also indicated significant impacts from industrial effluents.     

Conditions affecting the release of phosphorus from surface lake sediments

Laboratory studies were conducted to determine the effect of pH and redox conditions, as well as the effect of Fe, Mn, Ca, Al, and organic matter, on the release of ortho-phosphates in lake sediments taken from Lakes Koronia and Volvi (Northern Greece). Results were evaluated in combination with experiments to determine P fractionation in the sediment. The study revealed the major effect of redox potential and pH on the release of P from lake sediments. Both lakes showed increased release rates under reductive conditions and high pH values. The fractionation experiments revealed increased mobility of the reductive P fraction as well as of the NaOH-P fraction, indicating participation of both fractions in the overall release of sediment-bound P, depending on the prevailing environmental conditions. The results were assessed in combination with the release patterns of Fe, Mn, Ca, Al, and organic matter, enabling the identification of more specific processes of P release for each lake. The basic release patterns included the redox induced reductive dissolution of P-bearing metal oxides and the competitive exchange of phosphate anions with OH- at high pH values. The formation of an oxidized surface microlayer under oxic conditions acted as a protective film, preventing further P release from the sediments of Lake Volvi, while sediments from Lake Koronia exhibited a continuous and increased tendency to release P under various physicochemical conditions, acting as a constant source of internal P loading.     

Agricultural and non-agricultural directions of bio-based sewage sludge valorization by chemical conditioning

Environmental Science and Pollution Research - This literature review outlines the most important—agricultural and non-agricultural—types of sewage sludge management. The potential of...     

Recycled tire granular for playground in hot regions: technical assessment

Journal of Material Cycles and Waste Management - Scrap tire granulation used for crumb rubber tiles and poured-in-place rubber surfaces are waste management strategy for the overgrowing tire...     

Modeling the emissions of a dual fuel engine coupled with a biomass gasifier—supplementing the Wiebe function

There is a growing market demand for small-scale biomass gasifiers that is driven by the economic incentives and the legislative framework. Small-scale gasifiers produce a gaseous fuel, commonly referred to as producer gas, with relatively low heating value. Thus, the most common energy conversion systems that are coupled with small-scale gasifiers are internal combustion engines. In order to increase the electrical efficiency, the operators choose dual fuel engines and mix the producer gas with diesel. The Wiebe function has been a valuable tool for assessing the efficiency of dual fuel internal combustion engines. This study introduces a thermodynamic model that works in parallel with the Wiebe function and calculates the emissions of the engines. This “vis-à-vis” approach takes into consideration the actual conditions inside the cylinders—as they are returned by the Wiebe function—and calculates the final thermodynamic equilibrium of the flue gases mixture. This approach aims to enhance the operation of the dual fuel internal combustion engines by identifying the optimal operating conditions and—at the same time—advance pollution control and minimize the environmental impact.     

Implementing nanoparticles for competitive drinking water purification

Environmental Chemistry Letters - The implementation of nanotechnology in drinking water treatment is a very promising field for applied research. A major part of this effort focuses on the...     

NH4+-N versus pH and ORP versus NO3−-N sensors during online monitoring of an intermittently aerated and fed membrane bioreactor

Environmental Science and Pollution Research - Online sensors, which monitor the ammonia oxidation and the dissimilatory nitrate reduction process, can optimize aerobic and anoxic phase duration....     

Soil column experiments used as a means to assess transport, sorption, and biodegradation of pesticides in groundwater

Soil column experiments are used to investigate the fate of three pesticides of high, intermediate, and low solubility in groundwater: N- phosphonomethyl glycine (glyphosate); O,O-diethyl-S-[(ethylthio)methyl]phosphorodithioate (phorate); (2,4-dichlorophenoxy)acetic acid (2,4-D). Feed solutions are prepared by adding each pesticide (100 mg/L glyphosate, 50 micro g/L phorate, 50 mg/L 2,4-D) along with conservative tracer, KBr, in synthetic groundwater. The concentration of the pesticides in effluents is detected by ion chromatography (glyphosate, 2,4-D) and GC-FID (phorate). The Br(-) breakthrough curves are employed to estimate the dispersion coefficient and mean pore velocity in each column. Solute transport and reactive models accounting for equilibrium/non-equilibrium sorption and biodegradation are coupled with inverse modeling numerical codes to estimate the kinetic parameters for all pesticides.