Air quality measurements for the aerosol research and inhalation epidemiology study

Measurements of pollutant gases, airborne particulate matter mass and composition, and meteorology have been made at a core site near downtown Atlanta, GA, since August 1998 in support of the Aerosol Research and Inhalation Epidemiology Study (ARIES). This site is one of eight in the Southeastern Aerosol Research and Characterization network. The measurement objective is to provide a long-term, multivariate dataset suitable for investigating statistical associations of respiratory and cardiovascular disease with airborne particulate matter composition, meteorology, and copollutant gases through epidemiologic modeling. Measurements are expected to continue through 2010. Ancillary multiyear measurements at additional sites in the Atlanta metropolitan area and in short-term exposure assessments have been used to estimate the exposure/measurement error associated with using data from a central site to approximate human exposures for the entire area. To date, 13-, 25-, and 53-month air quality datasets have been used in epidemiologic analyses.     

MODELING GROUND WATER FLOW USING FLUX BOUNDARY CONDITIONS1

ABSTRACT: Determination of the boundary conditions for modeling ground water flow is a critical point especially in regional models. Normally the regional models require model areas that are greater than the given area of interest. This work focuses on the prediction of hydraulic heads in regional models using flux boundary conditions. The model uses flux boundary conditions that were estimated using a radial flow analog and Darcy's law. The regional model that is presented uses no parameter identification (inverse estimation) procedures. In the present work, the Houston area was used. The simulation of the hydrological conditions of the Chicot and Evangeline Aquifers that underlie the Houston area were made using the available information about the geological profile in the Houston region and the current information about the existing production wells. The regional model works as a forward problem. The system parameters such as hydraulic conductivity, specific storage, and hydrological stresses were specified, and the model predicts the hydraulic head. Actual data from piezometers operated by the U.S. Geological Survey (USGS) in many places throughout Houston were used as initial conditions. Some piezometric head data were generated using the regional variable theory called kriging to supply head estimates in areas where data were unavailable. The Modular Three Dimensional Finite Difference Groundwater Flow Model developed by the USGS was used to predict the hydraulic heads. The predicted ground water heads are compared to the actual data. The results show that the model performs well for locations where data were available.     

Land Management in the American Southwest: A State-and-Transition Approach to Ecosystem Complexity

State-and-transition models are increasingly being used to guide rangeland management. These models provide a relatively simple, management-oriented way to classify land condition (state) and to describe the factors that might cause a shift to another state (a transition). There are many formulations of state-and-transition models in the literature. The version we endorse does not adhere to any particular generalities about ecosystem dynamics, but it includes consideration of several kinds of dynamics and management response to them. In contrast to previous uses of state-and-transition models, we propose that models can, at present, be most effectively used to specify and qualitatively compare the relative benefits and potential risks of different management actions (e.g., fire and grazing) and other factors (e.g., invasive species and climate change) on specified areas of land. High spatial and temporal variability and complex interactions preclude the meaningful use of general quantitative models. Forecasts can be made on a case-by-case basis by interpreting qualitative and quantitative indicators, historical data, and spatially structured monitoring data based on conceptual models. We illustrate how science- based conceptual models are created using several rangeland examples that vary in complexity. In doing so, we illustrate the implications of designating plant communities and states in models, accounting for varying scales of pattern in vegetation and soils, interpreting the presence of plant communities on different soils and dealing with our uncertainty about how those communities were assembled and how they will change in the future. We conclude with observations about how models have helped to improve management decision-making.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.     

Atmospheric benzene depletion by soil microorganisms

Gaseous benzene was rapidly depleted in exposure chambers containing viable soils and plants. When separate components of the system were analyzed, no benzene was detected in soils, plants, or water. Soil microorganisms were shown to be responsible for metabolizing benzene, yielding CO₂ as the main product. The rates were sufficiently rapid to suggest that this reaction forms a major pathway for the elimination of benzene from the environment.This work was sponsored and conducted at the Environmental Protection Agency-Environmental Monitoring Systems Laboratory, Las Vegas, Nevada, U.S.A.     

USING SUBSURFACE DRIP IRRIGATION FOR ALFALFA1

ABSTRACT: A test of the suitability of subsurface drip irrigation (SDI) for alfalfa (Medicago sativa L) compared to a sprinkler, was conducted on a Kansas producer's field where the soil is loam. The treatments included drip tape spacing of 60, 40, and 30 inches placed at depths of 18 and 12 inches. A nearby plot irrigated by a center pivot sprinkler was seeded to alfalfa and used for comparison. Seedling emergence and yield were adversely affected at 60 inch spacing, while the depth of placement of drip tapes (18 and 12 inches) showed no effect on yield. The site served for education and allowed comparison between SDI tape spacing and center pivot system.     

Application of thresholds of potential concern and limits of acceptable change in the condition assessment of a significant wetland

We propose a framework in which thresholds of potential concern (TPCs) and limits of acceptable change (LACs) are used in concert in the assessment of wetland condition and vulnerability and apply the framework in a case study. The lower Murrumbidgee River floodplain (the ‘Lowbidgee’) is one of the most ecologically important wetlands in Australia and the focus of intense management intervention by State and Federal government agencies. We used a targeted management stakeholder workshop to identify key values that contribute to the ecological significance of the Lowbidgee floodplain, and identified LACs that, if crossed, would signify the loss of significance. We then used conceptual models linking the condition of these values (wetland vegetation communities, waterbirds, fish species and the endangered southern bell frog) to measurable threat indicators, for which we defined a management goal and a TPC. We applied this framework to data collected across 70 wetland storages’, or eco-hydrological units, at the peak of a prolonged drought (2008) and following extensive re-flooding (2010). At the suggestion of water and wetland mangers, we neither aggregated nor integrated indices but reported separately in a series of chloropleth maps. The resulting assessment clearly identified the effect of rewetting in restoring indicators within TPC in most cases, for most storages. The scale of assessment was useful in informing the targeted and timely management intervention and provided a context for retaining and utilising monitoring information in an adaptive management context.     

Dry Deposition of Ammonia at Environmental Concentrations on Selected Plant Species

The deposition velocity of NH₃ on six plant species at environmental concentrations has been studied in a dynamic plant gas exchange reactor. The total resistance to the transport of NH₃ was studied. The aerodynamic resistance was determined directly by NH₃ gas absorption in aqueous solutions at environmental concentrations in a two-phase gradientless reactor modeling the transfer processes through the stomata in a leaf. The concentration of NH₃ in the gas phase ranged from 50 to 1000 ppb and the temperature varied from 25 to 30°C. The results for the deposition velocity for NH₃, during the day, varied from 0.3 to 1.3 cm/s. The deposition velocities at night were about one order of magnitude smaller. These results are compared with estimates from the Frdssling equation which consistently yields higher values of the same order of magnitude. To determine accurate atmospheric transport models or global budget models, a variable deposition velocity should be used to account for the diurnal and seasonal variations in the surface resistance.