Fish pollution with anthropogenic 137Cs in the southern Baltic Sea

This paper presents the results of a study on changes in ¹³⁷Cs activity concentrations in three fish species from the southern Baltic Sea: cod (Gadus morhua), herring (Clupea harengus) and flounder (Platichtys flesus), in the period 2000–2010. During the study period a marked decline in cesium activity concentration in fish muscle tissue was observed, which reflected changes in radionuclide activity concentration in seawater. No statistically significant temporal trends were determined in changes of concentration factors (CF_{fish/seawater}) calculated for the examined fish species. The analysis of ¹³⁷Cs activity as a function of ichthyological parameters revealed the lack of a relationship between radionuclide activity concentrations in herring muscle tissue and the fish age in an narrow age range (2–4 years). However, a reverse proportionality of total fish mass, as well as body length, against ¹³⁷Cs activity concentrations in muscles was well documented. The latter observation can be the direct result of the dilution effect related to the increase of fish body weight. ¹³⁷Cs activity concentration in muscle tissue of the five fish species forms a declining sequence: Gadus morhua, Platichthys flesus, Clupea harengus, Perca fluviatilis and Neogobius melanostomus.     

Styrofoam debris as a potential carrier of mercury within ecosystems

The present paper falls within the trend of research into interactions between various pollutants emitted anthropogenically into the environment and focuses on mercury and styrofoam debris. The study covers part of the Southern Baltic’s drainage area. Apart from styrofoam and beach sand, the research involved mosses, which are bioindicators of atmospheric metal pollution. The research has shown that mercury present in the environment becomes associated with styrofoam debris. The median for mercury concentrations in virgin styrofoam samples (0.23 ng g^?1 dry weight (d.w.)) and in beach sand samples (0.69 ng g^?1 d.w.) was an order of magnitude lower than in the styrofoam debris (5.20 ng g^?1 d.w.). The highest mercury content observed in styrofoam debris (3,863 ng g^?1 d.w.) exceeded the standards for bottom sediment and soil. The binding of mercury to styrofoam debris takes place in water, and presumably also through contact with the ground. A significant role in this process was played by biotic factors, such as the presence of biofilm and abiotic ones, such as solar radiation and the transformations of mercury forms related to it. As a result, mercury content in styrofoam debris underwent seasonal changes, peaking in summertime. Furthermore, the regional changes of mercury content in the studied debris seem to reflect the pollution levels of the environment.     

Tributyltin (TBT) induces oxidative stress and modifies lipid profile in the filamentous fungus Cunninghamella elegans

To investigate the response of the tributyltin-degrading fungal strain Cunninghamella elegans to the organotin, a comparative lipidomics strategy was employed using an LC/MS-MS technique. A total of 49 lipid species were identified. Individual phospholipids were then quantified using a multiple reaction monitoring method. Tributyltin (TBT) caused a decline in the amounts of many molecular species of phosphatidylethanolamine or phosphatidylserine and an increase in the levels of phosphatidic acid, phosphatidylinositol and phosphatidylcholine. In the presence of TBT, it was observed that overall unsaturation was lower than in the control. Lipidome data were analyzed using principal component analysis, which confirmed the compositional changes in membrane lipids in response to TBT. Additionally, treatment of fungal biomass with butyltin led to a significant increase in lipid peroxidation. It is suggested that modification of the phospholipids profile and lipids peroxidation may reflect damage to mycelium caused by TBT.     

Mercury in certain boletus mushrooms from Poland and Belarus

This paper reports the results of the study of Hg contents of four species of Boletus mushroom (Boletus reticulatus Schaeff. 1763, B. pinophilus Pilát & Dermek 1973, B. impolitus Fr. 1838 and B. luridus Schaeff. 1774) and the surface soils (0–10 cm layer, ～100 g) samples beneath the mushrooms from ten forested areas in Poland and Belarus by cold-vapour atomic absorption spectroscopy. The ability of the species to bioconcentrate Hg was calculated (as the BCF) while Hg intakes from consumption of these mushroom species were also estimated. The median Hg content of the caps of the species varied between 0.38 and 4.7 mg kg^?1 dm; in stipes between 0.13 and 2.5 mg kg^?1 dm and in the mean Hg contents of soils varied from 0.020 ± 0.01 mg kg^?1 dm to 0.17 ± 0.10 mg kg^?1 dm which is considered as “background” Hg level. The median Hg content of caps of B. reticulatus and B. pinophilus were up to 4.7 and 3.6 mg kg^?1 dm, respectively, and they very efficiently bioaccumulate Hg with median BCF values of up to 130 for caps and 58 for stipes. The caps and stipes of these mushrooms if eaten will expose consumer to elevated dose of total Hg estimated at 1.4 mg for caps of Boletus reticulatus from the Kacze ??gi site, which is a nature reserve area. Nevertheless, the occasional consumption of the valued B. reticulatus and B. pinophilus mushrooms maybe safe.     

Assessment of microbial contamination within working environments of different types of composting plants

The objective of the study was to determine the degree of microbiological contamination, type of microflora, bioaerosol particle size distribution, and concentration of endotoxins in dust in different types of composting plants. In addition, this study provides a list of indicator microorganisms that pose a biological threat in composting facilities, based on their prevalence within the workplace, source of isolation, and health hazards. We undertook microbiological analysis of the air, work surfaces, and compost, and assessed the particle size distribution of bioaerosols using a six-stage Andersen sampler. Endotoxins were determined using gas chromatography–mass spectrometry (GC-MS). Microbial identification was undertaken both microscopically and using biochemical tests. The predominant bacterial and fungal species were identified using 16S rRNA and ITS1/2 analysis, respectively.?The number of mesophilic microorganisms in composting plants amounted to 6.9 × 10²–2.5 × 10⁴ CFU/m³ in the air, 2.9 × 10²–3.3 × 10³ CFU/100 cm² on surfaces, and 2.2 × 10⁵–2.4 × 10⁷ CFU/g in compost. Qualitative analysis revealed 75 microbial strains in composting plants, with filamentous fungi being the largest group of microorganisms, accounting for as many as 38 isolates. The total amount of endotoxins was 0.0062–0.0140 nmol/mg of dust. The dust fraction with aerodynamic particle diameter of 0.65–1.1 μm accounted for 28–39% of bacterial aerosols and 4–13% of fungal aerosols. We propose the following strains as indicators of harmful biological agent contamination: Bacillus cereus, Aspergillus fumigatus, Cladosporium cladosporioides, C. herbarum, Mucor hiemalis, and Rhizopus oryzae for both types of composting plants, and Bacillus pumilus, Mucor fragilis, Penicillium svalbardense, and P. crustosum for green waste composting plants. The biological hazards posed within these plants are due to the presence of potentially pathogenic microorganisms and the inhalation of respirable bioaerosol. Depending on the type of microorganism, these hazards may be aggravated or reduced after cleaning procedures.

Implications:?This study assessed the microbial contamination in two categories of composting plants: (1) facilities producing substrates for industrial cultivation of button mushrooms, and (2) facilities for processing biodegradable waste. Both workplaces showed potentially pathogenic microorganisms, respirable bioaerosol, and endotoxin. These results are useful to determine the procedures to control harmful biological agents, and to disinfect workplaces in composting plants.     

Mathematical modeling of biomass fuels formation process

The increasing demand for thermal and electric energy in many branches of industry and municipal management accounts for a drastic diminishing of natural resources (fossil fuels). Meanwhile, in numerous technical processes, a huge mass of wastes is produced. A segregated and converted combustible fraction of the wastes, with relatively high calorific value, may be used as a component of formed fuels. The utilization of the formed fuel components from segregated groups of waste in associated processes of co-combustion with conventional fuels causes significant savings resulting from partial replacement of fossil fuels, and reduction of environmental pollution resulting directly from the limitation of waste migration to the environment (soil, atmospheric air, surface and underground water). The realization of technological processes with the utilization of formed fuel in associated thermal systems should be qualified by technical criteria, which means that elementary processes as well as factors of sustainable development, from a global viewpoint, must not be disturbed. The utilization of post-process waste should be preceded by detailed technical, ecological and economic analyses. In order to optimize the mixing process of fuel components, a mathematical model of the forming process was created. The model is defined as a group of data structures which uniquely identify a real process and conversion of this data in algorithms based on a problem of linear programming. The paper also presents the optimization of parameters in the process of forming fuels using a modified simplex algorithm with a polynomial worktime. This model is a datum-point in the numerical modeling of real processes, allowing a precise determination of the optimal elementary composition of formed fuels components, with assumed constraints and decision variables of the task.     

Acquisition feasibility and methane fermentation effectiveness of biomass of microalgae occurring in eutrophicated aquifers on the example of the Vistula Lagoon

This study was aimed at establishing the feasibility of microalgae biomass acquisition from waters of the Vistula Lagoon with the use of an installation operating in the fractional–technical scale, and at determining the effectiveness of biogas production from the acquired substrate. Depending on the technological solution of the concentration process, the degree of aquatic biomass hydration ranged from 99.6 to 97.90%. The quantity of biogas produced during methane fermentation fitted within the range of 243.9 to 395.2 dm³/kg d.m.. The values achieved were found to depend directly on the concentration of organic matter in the acquired water biomass and on system’s loading with a feedstock of organic compounds. The content of methane in a gaseous mixture ranged from 41.4 to 61.9%. The biomass produced was predominated by taxa belonging to Cyanoprokaryota, Bacillarophyceae, and Chlorophyta.     

Shell deformations in the Baltic clam Macoma balthica from southern Baltic Sea (the Gulf of Gdansk): hypotheses on environmental effects

High-resolution digital photography and graphical image analyses systems have been used to define external morphometric characters of shell deformations in four populations of the Baltic clam Macoma balthica from the Gulf of Gdansk (southern Baltic Sea). The proposed shell deformation indices (SDI), which were based on the relationship of selected dimensions in the posterior and the anterior part of the shell, showed at least three morphological features that provide a distinctive diagnosis of "regular" and "deformed" clams: the presence of flexure on the posterior side (SDI1), elongated posterior region (SDI2), and shell growth (SDI3). The degree and prevalence of deformed clams varied locally over space. Increase in percentage contribution of aberrated shells with depth, corresponding to oxygen depletion profile in the Gulf, suggests low oxygen concentrations as the main agent exerting a deforming influence. The observed morphological aberrations developed with age (size) of a bivalve, suggesting a long-term effect of causal factors, and were accompanied by lightening shell weight, possibly due to decalcification of previously deposited calcareous material during anaerobic metabolism. It is hypothesized that hypoxic/anoxic conditions and a subsequent presence of hydrogen sulfide on a deep organic-rich sea bottom induce shell form alterations that enable the pumping of oxygenated water from above the anoxic layer. Such a morphological modification highlights the functional significance of shell deformations in protective response to the ambient low-oxygen concentrations. Sediment organotin concentrations fall within moderate to high contamination range and, therefore, may also have an adverse impact on the shell form. DNA analyses of the fragment of mitochondrial gene cytochrome oxidase I (COI, 393 base pairs) showed homogenous genetic structure of regular and deformed clams, indicating that shell deformations in M. balthica are primarily driven by acclimatization to the ambient environmental conditions.     

Study of sorption kinetics of some ionic liquids on different soil types

In the present contribution sorption kinetics experiments under static conditions were utilized in three selected ionic liquids cations (1-ethyl-3-methylimidazolium, 1-butyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium chlorides) study with five type of soil, differing in total organic carbon (TOC) content. The experimental results indicate the sorption capacity growth with increase in TOC content and hydrophobicity of ionic liquid cation. The obtained kinetic sorption parameters as well as distribution coefficients (K_d) were used to estimate the sorption properties of the soil types towards the ionic liquids in question. The Gibbs free energy values indicate that ionic liquid cations sorption on soils could be generally considered as a physical adsorption with exothermic effect. But the values of −dG for studied cations sorption on soil with very high of TOC content in soil (45%) may testify to nature of chemical adsorption. Sorption of the analyzed compounds occurs probably by means of hydrogen bonds, electrostatic and π  π interaction with the organic matter and the clay minerals of the soils.     

Differences in Cu content in selected mushroom species growing in the same unpolluted areas in Poland

The aim of the study was to estimate copper (Cu) accumulation efficiency in whole-fruiting bodies of 18 edible and non-edible wild growing mushrooms collected from 27 places in the Wielkopolska Voivodeship. Mushrooms were collected each time from the same places to estimate the diversity in Cu accumulation between tested mushroom species within 3 consecutive years of study (2011–2013). The study results revealed various accumulation of Cu in the whole-tested mushroom fruiting bodies. The highest mean accumulation of Cu was observed in Macrolepiota procera (119.4 ± 20.0 mg kg^?1 dm), while the lowest was in Suillus luteus and Russula fellea fruiting bodies (16.1 ± 3.0 and 18.8 ± 4.6 mg kg^?1 dm, respectively). Significant differences in Cu accumulation between mushroom species collected in 2011 and in the two following years (2012 and 2013) were observed. The results indicated that sporadic consumption of these mushrooms was not related to excessive intake of Cu for the human body (no toxic influence on health).