绿色生产力:一个亚洲可持续发展的手段

绿色生产力的概念是由亚洲生产力组织(APO)提出的.绿色生产力是一种提高生产率和环境性能的战略.它的目的是要确保社会-经济的均衡发展,使得人类生活质量能够可持续性改善.在提高获利性和竞争优势的同时,运用适当的生产力与环境管理手段、技术和工艺,能够降低团体活动、产品和服务所造成的环境影响.利益相关者群体(包括政府、工业界和学术界)提出了改革建议,就是希望能够得到更大的可持续能力.     

Thermal degradation of fluorotelomer treated articles and related materials

This study reports the first known studies to investigate the thermal degradation of a polyester/cellulose fabric substrate ("article") treated with a fluorotelomer-based acrylic polymer under laboratory conditions conservatively representing typical combustion conditions of time, temperature, and excess air level in a municipal incinerator, with an average temperature of 1000 degrees C or greater over approximately 2s residence time. The results demonstrate that the polyester/cellulose fabric treated with a fluorotelomer-based acrylic polymer is destroyed and no detectable amount of perfluorooctanoic acid (PFOA) is formed under typical municipal incineration conditions. Therefore, textiles and paper treated with such a fluorotelomer-based acrylic polymer disposed of in municipal waste and incinerated are expected to be destroyed and not be a significant source of PFOA in the environment.     

Real-time-monitored decrease of trichlorophenol as a dioxin surrogate in flue gas using iron oxide catalyst

The decrease of trichlorophenol by injecting oxidation catalyst into a municipal solid waste incinerator was monitored in real time. Direct sampling atmospheric pressure chemical ionization (APCI)/ion trap mass spectrometry (ITMS) was used for the real-time monitoring. The oxidation catalyst was iron oxide type, which exponentially reduced trichlorophenol emission. CO emission, however, did not show any correlation with the catalyst injection rate. Simultaneous analysis of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) suggested that real-time monitoring of trichlorophenol as a surrogate of PCDDs/PCDFs, has a potential to timely control the optimum injection rate of PCDD/PCDF suppression catalyst continuously and economically.     

Distribution,life history,and production of three species of <Emphasis Type="Italic">Neomysis</Emphasis> in Akkeshi-ko estuary,northern Japan

Spatial and seasonal distribution pattern, life history and production of three species of Neomysis (Mysidacea) which commonly occur in northwestern subarctic Pacific coastal waters, were investigated throughout the year in the Akkeshi-ko estuary, northern Japan. The most abundant species Neomysis awatschensis (annual mean density: 179.8 inds. m⁻², biomass: 108.8 mg DW m⁻²) occurred at the inner part of the estuary including low salinity areas with no clear preference for the seagrass bed. The second most abundant Neomysis mirabilis (mean density: 95.8 inds. m⁻², biomass: 90.1 mg DW m⁻²) occurred at relatively saline seagrass site throughout the year. Occurrence of Neomysis czerniawskii in the estuary was limited to the seagrass bed during summer when their population mainly consisted of juveniles, suggesting that this species is a seasonal migrant between the estuary and the marine environment. Both N. awatschensis and N. mirabilis populations were composed of two generation types, a larger sized overwintering and smaller sized spring/summer generations; however, each species had a different reproductive strategy. N. awatschensis was characterized by fast growth to maturity at a smaller size than N. mirabilis with a relatively high fecundity during warm season, suggesting that this species is an r-strategist which can utilize opportunistically a wide variety of habitats. In contrast, the seagrass bed resident N. mirabilis was a K-strategist which matures at a larger size producing fewer but larger offspring. The annual production of N. awatschensis (0.57–0.70 g DW m⁻², mean of the whole estuary) and N. mirabilis (0.58–0.68 g DW m⁻², mean of the seagrass bed) at their respective habitats was comparable. Consequently, species-specific life history and distribution pattern are concluded to allow Neomysis spp. to coexist in the estuary and the high carrying capacity of seagrass bed is suggested to contribute to maintain their high biomass level.     

Polybrominated diphenyl ethers and persistent organochlorines in Japanese human adipose tissues

The present study determined concentrations of polybrominated diphenyl ethers (PBDEs) and persistent organochlorines (OCs) in Japanese human adipose tissues collected during 2003–2004. Concentrations of PBDEs in adipose tissues were 1–2 orders of magnitude lower than those of OCs. However, observed PBDE congener levels in this study were relatively higher than those in Japanese human adipose tissues collected during 2000 reported previously, while OC levels were comparable to those in specimens collected during 1999 reported by our group. In addition, no age-dependent accumulation of PBDEs was observed, while OC levels except chlordane compounds increased with age. These results indicate recent human exposure to PBDEs in Japan. Among PBDE congeners accumulated in Japanese adipose tissues, BDE-153 was dominant, but this trend was different from those in human milk (BDE-47) and blood (BDE-209) reported previously in Japan, implying the congener-specific kinetics in human bodies. The significant positive correlations between PBDEs and OCs were observed in Japanese adipose tissues, indicating the similar exposure route of these contaminants for Japanese citizens, probably via fish intake.     

Improved preparation of recycled polymers in chemical recycling of fiber-reinforced plastics and molding of test product using recycled polymers

We examined an improved preparation method of recycled unsaturated polyester resin from recovered monomeric materials obtained from the depolymerization of fiber-reinforced plastics (FRPs). The formation of unsaturated polyester progressed smoothly in the presence of catalytic amounts of Ca(OAc)₂ and Ti(OBu)₄. The quality of the resin was estimated by the durometer hardness test. The strength test of FRP board prepared from recycled resin showed sufficient hardness for practical use (about 94% of the tensile strength of new resin). We examined the recycled resin by using it to mold successfully an actual test product.     

Efficient chemical recycling of waste fiber-reinforced plastics: use of reduced amounts of dimethylaminopyridine and activated charcoal for the purification of recovered monomer

We have achieved major improvements in the efficient chemical recycling of waste fiber-reinforced plastics (FRPs). The effects of reduction in the amounts of dimethylaminopyridine (DMAP) used for depolymerization were examined. The treatment of waste FRP in the presence of 1 or 2 wt% DMAP resulted in the successful recovery of monomeric materials that could be employed in the polymerization process to produce recycled plastic. The separation of linker units from glass fiber, however, was unsuccessful. The purity of the recovered monomeric material, when treated with activated charcoal, was improved to about 70%. This resulted in effective decoloration of the recovered monomer. Finally, the purified material, after undergoing repolymerization, provided high-quality recycled plastic comparable to new plastics produced from new monomers.