The ionic compositions of fine and coarse particle fractions in the two urban areas of Korea

The ionic composition of PM2.5 and PM10 was investigated using PM samples collected from Seoul and Busan during the winter of 2002. Based on the measurement data, we attempted to investigate the relative roles of different source processes in the composition of airborne particles at the two distinct urban areas. According to our measurements, the major components of both PM fractions were clearly distinguished from each other at the two different sites. It was found that the ionic concentrations in coarse fractions were generally compatible with each other at the two sites (NH(4)(+), NO(3)(-), NSSS, etc.). However, differences in their concentration levels were significant in the fine fractions and their mass concentration levels in Seoul exhibit threefold enhancement relative to Busan. The results further indicated that anthropogenic signatures were generally more evident in the fine rather than coarse fractions at both sites. However, a comparison of the coarse fraction data indicated the dominance of natural (oceanic) processes at the Busan site and conservative relationships among the different ionic components. The results of the back trajectory analysis confirmed that air mass movement patterns influence the ionic compositions of PM across different particle fractions and between different study sites.     

Prevention of progressive collapse for building structures to member disappearance by accidental actions

Recently some building structures have collapsed because of losses of vertical load carrying capacities resulting from accidental events. In this paper, limit analysis called Compact Procedure is applied to some cases of collapsed structures and the key-elements in the structures are identified using Sensitivity Analysis. Two collapse prevention methods are discussed. For truss structures, the collapse can be prevented by reinforcement of members having sensitivity greater than 0.3–0.4. For frame structures, the relations between the sensitivity and the progressive collapse are defined using a safety factor and the progressive collapse can be prevented by fixing X braces into each span of the top floor.     

TCDD alters PKC signaling pathways in developing neuronal cells in culture

2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) is known to induce neurodevelopmental deficits such as poor cognitive development and motor dysfunction. However, the mechanism of TCDD-mediated neurotoxicity remains unclear. Since PKC signaling is one of the most pivotal events involved in neuronal function and development, we analyzed the effects of TCDD on the PKC signaling pathway in cerebellar granule cells derived from PND-7 rat brain. Immunoblot analysis revealed the presence of PKC-alpha, betaII, delta, epsilon, lambda and iota in both cytosol and membrane fractions of cerebellar granule cells, but PKC-gamma was below the detectable level. TCDD induced a significant translocation of PKC-alpha, -betaII and -epsilon from cytosol to membrane fraction (p<0.05) and a marginal translocation of PKC-delta at high dose only (p<0.1). It also increased RACK-1, an adaptor protein for PKC, in a dose-dependent manner. Exposure to TCDD induced a dose-dependent increase of both [3H] PDBu binding and the intracellular calcium level. The results suggest that the selective PKC isozymes and RACK-1 are involved in TCDD-mediated signaling pathway and these proteins may be possible molecular targets in neuronal cells for TCDD exposure. Our study provides basic data to understand mechanism of TCDD-induced neurotoxicity with respect to PKC signaling pathway and a scientific basis for improving the health risk assessment of neurotoxicants by identifying intracellular target molecules in neuronal cells.     

Atmospheric deposition of polybrominated diphenyl ethers (PBDEs) in coastal areas in Korea

Atmospheric bulk samples were collected monthly, for one year, from urban, suburban, and rural sites located in the coastal areas of Korea, for the assessment of depositional fluxes and seasonal variations in atmospheric concentrations of PBDEs. Twenty individual PBDE congeners were found in atmospheric samples, and their depositional fluxes varied from 10.1 to 89.0 microg/m2/year. The highest depositional fluxes were found in two urbanized areas, with a strong urban-rural gradient. The relationship between PBDE and particulate depositional fluxes showed significant correlation for all locations, which suggested the association of PBDEs to particulate phase. Deca-BDE (BDE 209) was the predominant congener (>93%) in all deposition samples, which is consistent with a high consumption of deca-BDE for the flame-retardant market in Korea. Seasonal variability was observed in PBDE concentrations for the two urban sites, whereas no seasonal trend was found for either the suburban or the rural location.     

Polybrominated diphenyl ethers (PBDEs) in sediment and bivalves from Korean coastal waters

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in sediment and bivalves collected from 25 coastal locations in Korea. Twenty major PBDE congeners were found in all sediment and bivalve samples. SigmaPBDE20 concentrations ranged from 0.45 to 494 ng/g, dry weight (average 27.8 ng/g dry weight) in sediments, and from 0.38 to 9.19 ng/g, wet weight (average 2.94 ng/g wet weight) in bivalves. The highest concentrations were found at locations near industrial complexes and large harbors, suggesting that human activities contribute to PBDEs contamination in Korean coastal environment. PBDE concentrations measured in our study, excluding BDE congener 209 (deca-BDE), in sediment and bivalves were lower than those reported from other countries; whereas BDE 209 concentrations were comparable to or higher than those reported from other countries. The predominant PBDE congener in sediments and bivalves was deca-BDE, which accounted for >90% and >60% of the total PBDE concentrations in sediment and bivalves, respectively. This is consistent with high consumption of deca-BDE for the flame-retardant market in Korea. Significant correlations existed among BDEs 28, 47, 99, 100, 153 and 154 in sediments and bivalves; however, BDEs 183 and 209 showed little correlation compared with less highly brominated congeners.     

Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines

Sequential washing techniques using single or dual agents [sodium hydroxide (NaOH) and hydrochloric acid (HCl) solutions] were applied to arsenic-contaminated soils in an abandoned iron-ore mine area. We investigated the best remediation strategies to maximize arsenic removal efficiency for both soils and arsenic-containing washing solution through conducting a series of batch experiments. Based on the results of a sequential extraction procedure, most arsenic prevails in Fe-As precipitates or coprecipitates, and iron exists mostly in the crystalline forms of iron oxide. Soil washing by use of a single agent was not effective in remediating arsenic-contaminated soils because arsenic extractions determined by the Korean standard test (KST) methods for washed soils were not lower than 6mg kg(-1) in all experimental conditions. The results of X-ray diffraction (XRD) indicated that iron-ore fines produced mobile colloids through coagulation and flocculation in water contacting the soils, containing dissolved arsenic and fine particles of ferric arsenate-coprecipitated silicate. The first washing step using 0.2M HCl was mostly effective in increasing the cationic hydrolysis of amorphous ferrihydrite, inducing high removal of arsenic. Thus, the removal step of arsenic-containing flocs can lower arsenic extractions (KST methods) of washed soils. Among several washing trials, alternative sequential washing using 0.2M HCl followed by 1M HCl (second step) and 1M NaOH solution (third step) showed reliable and lower values of arsenic extractions (KST methods) of washed soils. This washing method can satisfy the arsenic regulation of washed soil for reuse or safe disposal application. The kinetic data of washing tests revealed that dissolved arsenic was easily readsorbed into remaining soils at a low pH. This result might have occurred due to dominant species of positively charged crystalline iron oxides characterized through the sequential extraction procedure. However, alkaline extraction using NaOH was effective in removing arsenic readsorbed onto the surface of crystalline minerals. This is because of the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.     

Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

Perceived benefits of applying Pay for Safety Scheme (PFSS) in construction – A factor analysis approach

In recent years, construction safety has been a hot topic in Hong Kong. The Government of the Hong Kong Special Administrative Region (HKSAR) has launched different safety measures to improve the prevailing safety performance of the construction industry. The Pay for Safety Scheme (PFSS) has emerged as one of the major safety initiatives launched within the public sector construction industry since 1996. It aims to encourage the safety awareness by taking the contractor’s pricing for safety-related items out from the consideration of competitive bidding. The objective is to provide a concise review of the prevailing application of PFSS in Hong Kong in general, and to identify and analyse the key benefits of PFSS in construction through an industry-wide empirical questionnaire survey in particular. Altogether, 145 industrial practitioners who have derived extensive hands-on experience with the PFSS construction projects participated in the survey to indicate their levels of agreement to those 14 key benefits identified which were measured and analysed by factor analysis. The results of factor analysis indicated that the 14 individual benefits of implementing PFSS were consolidated under four underlying factors: (1) Enhancing safety climate and attitude; (2) Promoting effective safety-related communication; (3) Streamlining the safety procedures; and (4) Ensuring adequate safety training. A wider application of PFSS should be encouraged with a view to achieving better safety performance within the industry. It is recommended that a similar scheme to PFSS currently applied in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Effect of inorganic carbonate and organic matter in thermal treatment of mercury-contaminated soil

Environmental Science and Pollution Research - Thermal treatment of mercury (Hg)-contaminated soil was studied to investigate the desorption behavior of Hg at different temperatures. The soil...