Risk assessment of etofenprox (Vectron) on non-target aquatic fauna compared with other pesticides used as Simulium larvicide in a tropical environment

Within the rotational scheme developed by the Programme to fight the resistance of Simulium damnosum to chemical larvicides, there was an operational gap at discharges between 5 and 70 m³ s⁻¹ for the treatment of rivers where resistance to organophosphates was present. The use of permethrin and carbosulfan was precluded because of risk of environmental impact and, Bacillus thuringiensis ser. H-14 treatments were not envisageable due to cost and logistics constraints. Among the possible complementary groups of larvicides tested, the pseudo-pyrethroids, held promise, because of a mode of action similar to that of pyrethroids, but along with a usually lower toxicity for fish. Etofenprox, one of the pseudo-pyrethroids tested, shows a global detachment of non-target insects in 24 h close to that of pyraclofos, an organo-phosphorus compound (27 against 23%). In laboratory conditions, six times the operational dose which is 0.03 mg l⁻¹ 10 min, is needed to cause 50% mortality of Caridina sp. (a small shrimps species) and 30 times this same dose for 95% mortality. For fish species, a safety margin of 400–800 times the operational dose is observed for Oreochromis niloticus and 200–400 times for Tilapia zillii.     

Clonal differences in copper and zinc tolerance of birch in metal-supplemented soils

Metal tolerance of a range of birch clones (Betula pendula and Betula pubescens) originating from metal-contaminated sites in England, Wales, Belgium and Finland were tested in soils supplemented with several concentrations of copper (Cu) or zinc (Zn) (500, 2000, 5000 mg kg-1 dry wt. soil of CuSO(4).5H2O or ZnSO(4).7H2O) for 4 months and with sub-toxic metal supplements (500 mg CuSO4, 2000 mg ZnSO4) for 6 months. When grown at high concentrations of metals, severe toxicity symptoms (growth inhibition, chlorosis, necrosis) and clear evidence for differences in tolerance to this toxicity were found in a subset of the clones. When all clones were grown at a much lower, sub-toxic level of metal, again significant differences could be found between some of the clones. Clones derived from the same population varied greatly in their tolerance. However, the overall pattern of metal specificity varied in agreement with the type of soil contamination at the site of origin. The growth of the clones from Harjavalta Cu/nickel smelter area was 19% better in Cu than in Zn-supplemented soil, on average. The growth of clones from Maatheide Zn smelter are was 19% poorer in Cu- than in Zn-supplemented soil. Sensitive clones accumulated more Cu and Zn to the above-ground parts. Some birch clones were able to survive at about 20-fold higher than typical total background Cu or Zn concentrations, whereas most clones were able to grow without serious toxic symptoms at about 10-fold concentrations.     

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis"

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.     

Solubilization of substituted indole compounds by beta-cyclodextrin in water

The solubilization of four pairs of substituted indole compounds (SICs) by β-cyclodextrin (β-CD) in water was investigated. The results show that 1,2,3,4-tetrahydrocarbazole and N-methyl-1,2,3,4-tetrahydrocarbazole form 1:1 inclusion complexes with β-CD, while the other six SICs form 1:2 inclusion complexes, respectively. To each pair of SICs with similar structures, the differences between their solubilization in β-CD/water solutions has been explained by the difference of their contact area within the β-CD cavity, the difference of their molecule polarity, or the presence of hydrogen bond between SIC molecule and β-CD molecule.     

PCB-blood levels in teachers, working in PCB-contaminated schools

In order to get more information about potential health hazards due to indoor air PCBs the present study investigated the PCB indoor concentration in schools as well as the blood levels of 6 PCB-indicator congeners in teachers from these schools. 151 teachers (78 male and 73 female; mean age 48 years) from 3 contaminated and 2 control schools participated in the study. Maximal indoor air values for total PCBs (6 PCB-indicator congeners times 5) in schools ranged from 1587 to 10655 ng/m3. Blood analyses indicated an increase in mean PCB 28 level from 0.036 (control group) to 0.098 microg/l in teachers from a school with heavy contamination of low chlorinated PCB. But there was no significant increase of PCB 138, 153 and 180 in blood above the normal background concentrations in any of the contaminated schools (mean values of all groups: PCB 138 = 0.66, 153 = 0.95, 180 = 0.70 microg/l blood). The results of blood analyses and additional toxicokinetic calculations suggested that inhalative PCB-uptake in the most contaminated schools caused a minor increase above mean background-PCB concentrations in blood. In conclusion, despite high PCB indoor air levels in schools, there was only a moderate increase in blood concentrations of teachers, mainly due to congeners with low chlorination (PCB 28 to PCB 101).     

A method for removal of CO from exhaust gas using pulsed corona discharge

An experimental study of the oxidation of CO in exhaust gas from a motorcycle has been carried out using plasma chemical reactions in a pulsed corona discharge. In the process, some main parameters, such as the initial CO concentration, amplitude and frequency of pulses, residence time, reactor volume, and relative humidity (RH), as well as their effects on CO removal characteristics, were investigated. O3, which is beneficial to reducing CO, was produced during CO removal. When the exhaust gas was at ambient temperature, more than 80% CO removal efficiency was realized at an initial concentration of 288 ppm in a suitable range of the parameters.     

Evaluation of the Galega-Rhizobium galegae system for the bioremediation of oil-contaminated soil

The bioremediation potential of a nitrogen-fixing leguminous plant, Galega orientalis, and its microsymbiont Rhizobium galegae was evaluated in BTX (benzene, toluene, xylene)-contaminated soils in microcosm and mesocosm scale. To measure the intrinsic tolerance of the organisms to m-toluate, a model compound representing BTX, G. orientalis and R. galegae were cultivated under increasing concentrations of m-toluate alone and in association with Pseudomonas putida pWWO, a bacterial strain able to degrade toluene-derived compounds. The test plants and rhizobia remained viable in m-toluate concentrations as high as 3000 ppm. Plant growth was inhibited in concentrations higher than 500 ppm, but restituted when plants were transferred into m-toluate-free medium. Nodulation was blocked under the influence of m-toluate, but was restored after the plants were transferred into the non-contaminated media. In the mesocosm assay the Galega plants showed good growth, nodulation and nitrogen fixation, and developed a strong rhizosphere in soils contaminated with oil or spiked with 2000 ppm m-toluate. Thus, this legume system has good potential for use on oil-contaminated sites     

Tropospheric ozone decreases biomass production in radish plants (Raphanus sativus) grown in rural south-west Sweden

Potted plants of radish (Raphanus sativus L., cv. Cherry Belle) were grown in the ambient air for 5 weeks, with or without the application of a soil drench of the anti-ozonant ethylenediurea (EDU). The 24-h mean ozone concentration during the experimental period was 31 nl l(-1). Towards the end of the experiment two ozone episodes, with maximum concentrations around 70 and 115 nl l(-1), occurred. No visible injury that could be attributed to ozone was observed on any of the plants. Shoot and hypocotyl biomass were significantly lower in the non-EDU-treated plants than in the EDU-treated plants. The non-EDU-treated plants had a 32% lower hypocotyl biomass and a 22% lower shoot biomass. The shoot:hypocotyl ratio of the non-EDU-treated plants was higher than that of the EDU-treated plants, although the difference was not statistically significant. EDU treatment increased the leaf area and decreased the chlorophyll content of the leaves. These differences were, however, not statistically significant. It is suggested that the ambient rural ozone climate in southern Sweden has the potential to decrease biomass production in Cherry Belle radishes in the absence of visible injury.     

Differences in growth, leaf senescence and injury, and stomatal density in birch (Betula pendula Roth.) in relation to ambient levels of ozone in Finland

The differences in growth, leaf senescence, visible ozone injuries and stomatal density between one coastal site (natural ozone) and two inland sites (natural and elevated ozone) in Finland were determined for saplings of Betula pendula clones grown under open-field conditions during two growing seasons. Responses in growth, leaf senescence, visible injuries, and stomatal density were determined in relation to cumulative ozone exposure accumulated over the thresholds of 30, 40 and 50 ppb (10(9)) during the exposure period. In addition, the effects of the different ozone exposures on ultrastructure of chloroplasts were studied. Increasing ozone exposure resulted in reduced shoot dry weight, stimulated (first year) or reduced (second year) height growth, accelerated autumn yellowing of leaves, increased stomatal density, visible symptoms and chloroplast injuries, and increased number and size of plastoglobuli. Newly expanded mature leaves in midsummer were more sensitive to ozone episodes than younger developing leaves in the early growing season. In most parameters, the best correlation was achieved with the exposure index AOT30. Ozone risk for birch is highest in the southern coastal area of Finland, where background ozone concentrations are higher than in inland sites.     

Variability of cadmium, copper and zinc levels in molluscs and associated sediments from Chile

The concentrations of cadmium, copper and zinc in mussel and sediment samples collected together from eight different geographical coastal areas of Chile were determined. The mussels studied were 'Chorito Maico', 'Almejas' and 'Navajuelas Chilenas' (Perumytilus purpuratus, Semelle solida and Tagellus dombeii, respectively). Sampling was carried out in July and September 1992 and January and April 1993 (winter, spring, summer and autumn seasons in Chile, respectively). The metal levels in these mussels varied among species; there were several sites where the metal concentrations in molluscs approached or exceeded the criteria levels for Cd, Cu and Zn in shellfish products: 1, 10 and 50 ppm ww respectively, which are regarded as safe levels for human consumption. The results of metal levels in sediments showed two areas clearly polluted with Cu. Strong relationships between Cu concentrations in the three molluscs and sediments were found; weak correlations were observed for Zn in S. solida.