222Rn as indicator of atmospheric turbulence: measurements at Lake Maggiore and on the pre-Alps

Radon concentration measurements in atmosphere were taken in years from 1997 to 1999 in Milan and at pre-alpine sites located north of Lombardy. In this paper the results of measuring campaigns and a comparison of radon levels observed in the hilly area north of the town and on the pre-Alps are reported. The general criteria of the measurements and the interpretative models of radon concentration are presented. The Lake Maggiore area shows evidence of a great nocturnal stability and frequent formation of Nocturnal Stable Layer. The peculiar findings in the high altitude stations confirm the use of radon as an indicator of atmospheric dispersion of pollutants in an area with complex orography. The afternoon minimum values are concordant for the different stations: this implies a remixing in afternoon hours over the whole area investigated.     

Alpha radioactivity in drinking water in Quebec, Canada

The median gross-alpha radioactivity found in 236 drinking water samples in Quebec was 52 mBq/l. Only 3% of samples studied have an activity higher than the Maximum Contaminant Level of 555 mBq/l. The median detection limit of the method described is 24 mBq/l.     

Personal ammonia sensor for industrial environments

The realisation of an opto-chemical ammonia sensor suitable for personal monitoring tasks is described, comprising a cyanine dye immobilised in a microporous glass thin film. The fabrication of sensor platforms incorporating embossed grating couplers provides a compact optical design with effective waveguiding characteristics, resulting in reversible ammonia sensitivity in the 5-100 ppm range in under 2 min. Cross-sensitivity of sensor response with water and other potential interferents is considered.     

Determination of selected microbial volatile organic compounds by diffusive sampling and dual-column capillary GC-FID--a new feasible approach for the detection of an exposure to indoor mould fungi?

A new, analytically valid procedure is described to assess the exposure of human beings to the so-called microbial volatile organic compounds (MVOCs) in air. The method can be used routinely for large sample numbers and is especially valuable as a basis for further research on the correlation between single MVOCs and indoor mould growth. The procedure is based on the fact that fungi produce a variety of volatile organic compounds, such as 3-methylbutan-1-ol, 3-methylbutan-2-ol, fenchone, heptan-2-one, hexan-2-one, octan-3-one, octan-3-ol, pentan-2-ol, alpha-terpineol, and thujopsene, which they emit into the indoor environment. Using diffusive samplers, these MVOCs are adsorbed onto charcoal during a sampling interval of four weeks. The described method is thus superior to existing methods which use short-term active sampling. After desorption with carbon disulfide, the MVOCs were determined by dual-column gas chromatography with flame ionization detection using the large-volume injection technique for sample introduction. The detection limits ranged between 0.15 and 0.53 microgram m-3, within-series precision was found to range between 6.5 and 19.0%, and recovery was between 77 and 118%. The procedure has been successfully applied in the context of a large field study to measure the indoor MVOC exposure in children's rooms of 132 dwellings. The objective of the study was to examine the relation between indoor mould growth, the indoor MVOC exposure and the prevalence of adverse health effects. Information about mould formation has been obtained by a questionnaire and by the determination of colony forming units of mould fungi in mattress dust. With the exception of 3-methylbutan-2-ol, fenchone, nonan-2-one, octan-2-one, and thujopsene, indoor air concentrations of all MVOCs under investigation were significantly higher inside damp and mouldy dwellings. From the primary MVOCs under investigation, 3-methylbutan-1-ol, hexan-2-one, heptan-2-one, and octan-3-ol were found to be most reliable indicators for mould formation. A correlation was also found between selected MVOCs and the occurrence of mould species in mattress dust. Aspergillus sp. correlated with heptan-2-one, hexan-2-one, octan-3-ol, octan-3-one, and alpha-terpineol, while the occurrence of Eurotium sp. was correlated with higher indoor air concentrations of 3-methylbutan-1-ol, 3-methylbutan-2-ol, heptan-2-one, hexan-2-one, octan-3-ol, and thujopsene. Children living in dwellings with elevated MVOC levels had a higher prevalence of asthma, hay fever, wheezing, and irritations of the eyes. These positive associations persisted after controlling for confounding factors such as age, sex, body-mass index, number of siblings, social status, passive smoking, type of heating, and ventilation habits. However, they were not statistically significant. This lack of significance may be a result of the small number of investigated samples.     

Determinations of PCB within a project to develop cleanup methods for PCB-containing elastic sealant used in outdoor joints between concrete blocks in buildings

Determinations of PCB were carried out as part of a project aimed at developing cleanup methods for PCB-containing elastic sealant used in outdoor joints between concrete blocks. The goals of the project were to develop methods, which minimise the spread of PCB to the outdoor environment and to indoor air, and which keep the PCB levels as low as reasonably possible in the workplace environment whilst removing the elastic sealant. The following PCB determinations were carried out: (1) concentration in the elastic sealant; (2) concentration in the concrete close to the sealant; (3) concentration in soil; (4) concentration in the indoor air; and (5) concentration in the air in the workplace environment. The cleanup process consisted of a number of different steps: (1) cutting the elastic sealant with an oscillating knife; (2) grinding the concrete with a mechanical machine; (3) sawing the concrete with a mechanical saw and (4) cutting the concrete with a mechanical chisel. In all these different steps a high capacity vacuum cleaner connected to the machines was used. The elastic sealant contained 4.7 to 8.1% total PCB of a technical product with a composition most similar to Clophene A40. The concrete close to the sealant (first 2 mm) contained 0.12 and 1.7% total PCB at two different places. The pattern of the PCB in the concrete resembled that of the sealant. PCB concentrations in the soil from the ground close to the building were 0.1 and 0.3 ppm at two different places before the remedial action. The source of the PCB in the soil is most likely the sealant as the PCB pattern is similar for the two materials. The PCB levels in the workplace air at the beginning of the project, when the techniques were not fully developed, were generally above the occupational exposure limit of 10 micrograms m-3 (up to 120 micrograms m-3). Later when the techniques were optimised to better take care of dust and gases produced during the cutting and grinding etc., the levels were below or close to 10 micrograms m-3. The pattern of the PCB in the workplace air was different from that of the sealant and contained higher levels of lighter components. The PCB concentrations in the indoor air were measured before and during the remedial process. The levels were around 600 ng m-3 and there was no significant increase during the removal of the sealant. The PCB level after the remedial action will be measured later. The pattern of the PCB in the indoor air was different from that of the sealant as well as from that of the workplace air. Higher levels of the lighter PCB were present indoors compared to the composition in both workplace air and in sealant. Extracts of PCB were analysed by GC-MS with a SIM method (selected ion monitoring). Standard procedures were used for extraction of solid materials. For the air samples an OVS tube was used with XAD-2 as adsorbent. The filter and adsorbent were extracted with toluene. This work shows that it is important to perform remedial action of PCB-containing elastic sealant as: (1) there is a spread of PCB to the indoor air giving high enough concentrations to make this the main PCB load on humans living in the apartments studied in this project; (2) large amounts are spread to the soil from these sealants; and (3) many of the PCB-containing elastic sealants used need to be changed from a functional perspective.     

Growth substrate selection and biodegradation of PCP by New Zealand white-rot fungi

Nine New Zealand native white-rot fungi were studied for their ability to grow and survive on different substrates formulated from bark, wheat straw, sawdust, apple pomace and maize products in order to identify their pentachlorophenol (PCP) biodegradation potential and to select a fungal carrier for bioaugmentation of polluted soils. Isolates were also evaluated to mineralize (14)C-PCP in liquid culture and in soil. The American fungus Phanerochaete chrysosporium outgrew the native fungi on the substrates tested, but the high colonisation did not result in superior PCP dechlorination as measured by chloride release. Whilst Trametes versicolor inocula produced on wheat straw and SCS (sawdust-corn meal-starch-mix) gave the highest chloride release, colonization of these two substrates as measured by biological potential was lower compared to the pomace and pomace-sawdust-mix. Neither lignin peroxidase nor manganese peroxidase production were measured for New Zealand white-rot fungi during the experiments. Laccase was the only enzyme detected. In liquid culture, the mineralisation rate was higher for T. versicolor isolates compared to P. chyrysoporium. Very little to no pentachloroanisole (PCA) was captured in the volatile fraction of T. versicolor isolates, whereas 75% of the volatile fraction of P. chrysosporium consisted of PCA. The soil microcosms studies, using contaminated soil from a timber treatment site, clearly showed that the New Zealand T. versicolor isolates mineralized PCP. Degradation of PCP in non-sterile soil was higher in the presence of white-rot fungi than in soil without white-rot fungus. This demonstrates that viable white-rot fungus is necessary for significant PCP degradation and that T. versicolor isolates showed PCP remediation potential. Wheat straw and SCS could be suitable carriers for New Zealand native T. versicolor isolates for bioremediation of PCP polluted soil sites.     

Conflict on the Coast: Using Geographic Information Systems to Map Potential Environmental Disputes in Matagorda Bay,Texas

The sustainable management of coastal natural resources inevitably involves identifying stakeholder conflicts and developing planning processes that prevent these conflicts from becoming intractable disputes. This study links environmental conflict to specific areas within a large ecological system. Specifically, we use Geographic Information Systems (GIS) to map potentially competing stakeholder values associated with establishing protected areas in Matagorda Bay, Texas. By overlaying multiple values associated with a range of stakeholders across space, we are able to identify hotspots of potential conflict as well as areas of opportunity for maximizing joint gains. Mapping stakeholder conflict is an approach to proactively locate potential controversy in response to a specific environmental management proposal and guide decision makers in crafting planning processes that mitigate the possibility of intractable disputes and facilitate the implementation of sustainable coastal policies. Results indicate that under different management scenarios, protected area proposals will generate more conflict in specific areas. Most notably, regulated uses would produce the greatest degree of conflict on or near shore, particularly at the mouth of the Colorado River. Additionally, of all the management scenarios evaluated, the prohibition of coastal structural development would generate the overall highest level of conflict within the Bay. Based on the results, we discuss the policy implications for environmental managers and provide guidance for future research on location-based conflict management within the coastal margin.     

Impact of food industrial waste on anaerobic co-digestion of sewage sludge and pig manure

The performance of an anaerobic digestion process is much dependent on the type and the composition of the material to be digested. The effects on the degradation process of co-digesting different types of waste were examined in two laboratory-scale studies. In the first investigation, sewage sludge was co-digested with industrial waste from potato processing. The co-digestion resulted in a low buffered system and when the fraction of starch-rich waste was increased, the result was a more sensitive process, with process overload occurring at a lower organic loading rate (OLR). In the second investigation, pig manure, slaughterhouse waste, vegetable waste and various kinds of industrial waste were digested. This resulted in a highly buffered system as the manure contributed to high amounts of ammonia. However, it is important to note that ammonia might be toxic to the micro-organisms. Although the conversion of volatile fatty acids was incomplete the processes worked well with high gas yields, 0.8-1.0 m3 kg(-1) VS.     

Cost-effective control of SO2 emissions in Asia

Despite recent efforts to limit the growth of SO(2) emissions in Asia, the negative environmental effects of sulphur emissions are likely to further increase in the future. This paper presents an extension of the RAINS-Asia integrated assessment model for acidification in Asia with an optimisation routine that can be used to identify cost-effective emission control strategies that achieve environmental targets for ambient SO(2) concentrations and sulphur deposition at least costs. Example scenarios developed with this optimisation module demonstrate a potential for significant cost savings in Asia, if emission controls are allocated to those sources that have the largest environmental impact and are cheapest to control. It is shown that strategies that simultaneously address harmful population exposure and the risk of vegetation damage from acid deposition result in the most cost-effective use of resources spent for emission controls.