Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

LNAPLs污染物在层状非均质多孔介质中的运移试验研究

文章通过室内试验研究层状非均质多孔介质中轻非水相液体(Light Non-Aqueous Phase Liquid,LNAPL)的运移机制与分布特性。首先,在二维砂槽上进行LNAPL的入渗试验,试验过程中用数码相机进行拍照,把LANPL的扩散过程以图像的形式记录下来;然后,用AutoCAD对图片进行分析处理,得出不同时刻LNAPL的入渗锋面变化图。结果发现,介质结构突变面改变了LNAPL的迁移模式。在LNAPL由中砂进入细砂层后,由于受到毛细作用的增强,其运移速度加快;而由中砂进入粗砂,受粗砂介质阻滞作用增强的影响,LNAPL运移速度变小。当LNAPL由干砂进入湿润砂体时,由于孔隙水浮托力增大,LNAPL先产生纵向运移,随后以横向迁移的形式在地下水位上部聚积。当达到一定厚度后,LNAPL的压头足以克服浮托力,驱替孔隙水进入砂土孔隙。另外,LNAPL的厚度足够大时,方可克服饱水层受到的浮托力,在地下水位上形成LNAPL池,并因孔隙水向周围砂体排泄,LNAPL池周围的水位上升。     

蔗渣垫料在零排放发酵床养猪中的应用研究

目前微生物发酵床养猪垫料是选用木屑、谷壳作为原料,来实现零排放养猪。文章选用农业固体废弃物——蔗渣为垫料应用于零排放漏缝发酵床养猪,跟踪了3个月垫料在实际使用中的温度、有机质、氮、磷、钾、微生物指标,对蔗渣的使用效果进行了评价,并建立PCR反应体系来扩增DNA,利用PCR-DGGE技术对垫料中的微生物群落多样性进行研究。结果表明:蔗渣作为垫料,能使垫床温度控制在40⁶5℃之间,保证了良好的发酵效果、且有效活菌数达到0.22×109cfu/g,可以对猪粪便等有机质进行较彻底的消解,因此蔗渣可以作为一种垫料应用于零排放漏缝发酵床;垫料中总养分达到1.371 7%,使用后的垫料可以作为一种原料生产生物有机肥。     

植穴控制体对盐渍土生态重建的可持续性评价

基于盐渍土生态重建过程影响因子的复杂性,采用综合指标评价方法,选取4类母指标和相应的13项子指标对植穴控制体生态重建技术进行可持续评价。4类母指标分别为土壤养分与结构改良程度、生产力持续水平、组分间关系协调性和生态、社会效益,对应的13项子指标分别为:土壤水分、土壤含盐量、土壤养分含量、土壤容重和水质;土地利用效果、土地生产力水平与稳定度、绿地结构与环境功能;生态重建年限、生物群落变化和生态景观效果;小气候效益和游憩的功能效益。经权重分析认为,植穴控制体生态重建技术评价分值为0.772,评价等级为Ⅳ级,表明植穴控制体模式的盐渍土生态重建技术具有较好的稳定性和可持续的功能效应。     

2,2′-二硝基联苄生产废水的处理研究

对十六烷基三甲基溴化铵改性凹凸棒土、凹凸棒土负载TiO2采用XRD、FTIR以及TG等手段进行了分析和表征,对比了改性凹凸棒土、活性炭、大孔树脂等不同吸附剂和凹凸棒土负载TiO2对二硝基联苄生产废水的处理效果。结果表明:十六烷基三甲基溴化铵改性凹凸棒土的废水中污染物的去除率比凹凸棒土提高了2.5倍;凹凸棒土负载TiO2在波长λ=254 nm下光照0.5 h,对废水中污染物的去除率是凹凸棒土的2.0倍;投加量为3%活性炭在pH为2.0⁵.0时,对该类废水中污染物的去除率可达80%以上。     

苯酚降解红球菌的分离鉴定及降解特性研究

采用富集培养的方法,从唐山污水处理厂附近的植物根际土中分离得到1株高效苯酚降解菌11-111。该菌株为革兰氏阳性菌,可以在以苯酚为唯一碳源和能源的无机盐培养基上生长,能够耐受最高浓度为2 000 mg/L的苯酚。对该菌株的降解性能研究表明,在温度24~32℃,pH值6.5~8.5,装液量≤20 mL(100 mL摇瓶)范围内,摇床转速为160 r/min,菌株对初始浓度500~1 500 mg/L的苯酚均能有效降解。根据该菌株的形态、生理生化特性和16S rRNA基因序列同源性分析结果,鉴定为红球菌属(Rhodococcus sp.)菌株。该菌株具有较强的环境适应能力和苯酚降解能力,有较高的研究价值及应用前景。     

溶解氧变化对底泥酶活性及微生物多样性的影响

采用室内静态实验考察了溶解氧变化对底泥酶活性影响,同时采用BIOLOG ECO微平板构造了不同溶解氧水平下底泥微生物多样性指数。结果表明:高溶解氧条件下,底泥多酚氧化酶及过氧化物酶活性显著高于缺氧条件及厌氧条件(P<0.01),脱氢酶活性高于背景值;厌氧条件下脱氢酶、脲酶及碱性磷酸酶活性显著高于高溶解氧组、缺氧组及背景值(P<0.05);缺氧条件下硝酸盐还原酶活性显著高于高溶解氧组及厌氧组(P<0.05);蛋白酶活性受溶解氧水平变化的影响较小。BIOLOG ECO微平板法分析表明,溶解氧变化对底泥微生物多样性有不同程度的负面影响,微生物多样性的降低程度从大到小依次为高溶解氧组>厌氧组>缺氧组。主成分分析结果表明:缺氧条件及厌氧条件下,底泥微生物对大分子有机物的利用出现不同程度的降低,相对地,高溶解氧条件下微生物对大分子有机物的利用程度呈现先下降后上升的趋势;高溶解氧组及缺氧组底泥微生物对碳水化合物利用程度升高,厌氧组对碳水化合物利用程度降低。总之,高溶解氧条件更有利于形成底泥有机物完整的代谢循环,提高大分子有机物的利用程度。