最简化空气环境影响预测模式的实践

有风时空气环境影响的最简化预测模式,遵循高斯方程,过程的推导严密而具有科学性,适用于高架点源下风向地面污染最大浓度及距离的确定,计算方法删繁就简,预测结果较为准确,对三级环境评价中的空气环境影响预测具有广泛的实践意义。     

基塘系统可持续发展现状、问题及对策研究

珠江三角洲基塘生态系统是一种独特的人工生态系统，也是可持续农业的一种类型。本文分析了在经济高速发展的条件下，基塘生态系统的特点、现状及可持续发展中存在的问题，并针对性地提出对策和建议。     

GIS支持下的小尺度土地驱动力研究--以宜兴市湖滏小流域为例

在ARCINFO中的GRID模块的支持下，对宜兴市湖滏小流域的土地驱动力进行了研究，建立了以像元为单位的属性数据库，并随机选取了800个样点。采用LOGISTIC模型，探讨了社会经济因子与土地类型转移概率间的关系，揭示了任意两个土地类型相互转换的内在联系。     

分形及其在地震研究中的应用

本文简要介绍了分形的基本理论,对分形在地震研究中的应用进行了阐述.着重介绍了近年来地震分形在地震预报中应用的一些成果.在此基础上,提出了作者对于开展进一步工作的意见,认为应该对区域和全球的地震分形进行全局性、系统性的研究,逐渐探索地震分形的物理机制和动力学机制,从而在地震研究上取得新进展.     

济南市机动车污染与控制措施研究

针对对机动车污染的现状进行分析，提出加强机动车污染源头的排放控制和建立在用机动车排放控制管理体系是控制济南市机动车污染的有效措施。     

无机膜分离-水解酸化-SBR法处理含油废水

介绍了无机膜分离-水解酸化-SBR法工艺处理大豆油加工废水的工程实例，该工艺对CODCr去除率达89．5％；对BOD5去除率达92％；对动植物油去除率达到88％。出水水质达到了排放标准，具有一定推广价值。     

筒形件热收口可控内形技术研究

针对筒形件毛坯热收口工艺材料损耗大,100%修内弧的现状,首次提出用内喇叭外园柱收口坯代替原内圆柱外预制槽坯的新的收口坯料设计方案,用计算机有限元模拟了筒形件热收口的变形过程,进行了工艺优化和工艺验证试验。采用可控内形技术实现了筒形件毛坯热收口不修内弧或少修内弧的目的。     

Formation control of bromate and trihalomethanes during ozonation of bromide-containing water with chemical addition: Hydrogen peroxide or ammonia?

To ensure the safety of drinking water, ozone (O₃) has been extensively applied in drinking water treatment plants to further remove natural organic matter (NOM). However, the surface water and groundwater near the coastal areas often contain high concentrations of bromide ion (Br^?). Considering the risk of bromate (BrO₃^?) formation in ozonation of the sand-filtered water, the inhibitory efficiencies of hydrogen peroxide (H₂O₂) and ammonia (NH₃) on BrO₃^? formation during ozonation process were compared. The addition of H₂O₂ effectively inhibited BrO₃^? formation at an initial Br^? concentration amended to 350 µg/L. The inhibition efficiencies reached 59.6 and 100% when the mass ratio of H₂O₂/O₃ was 0.25 and > 0.5, respectively. The UV₂₅₄ and total organic carbon (TOC) also decreased after adding H₂O₂, while the formation potential of trihalomethanes (THMsFP) increased especially in subsequent chlorination process at a low dose of H₂O₂. To control the formation of both BrO₃^? and THMs, a relatively large dose of O₃ and a high ratio of H₂O₂/O₃were generally needed. NH₃ addition inhibited BrO₃^? formation when the background ammonia nitrogen (NH₃N) concentration was low. There was no significant correlation between BrO₃^? inhibition efficiency and NH₃ dose, and a small amount of NH₃N (0.2 mg/L) could obviously inhibit BrO₃^? formation. The oxidation of NOM seemed unaffected by NH₃ addition, and the structure of NOM reflected by synchronous fluorescence (SF) scanning remained almost unchanged before and after adding NH₃. Considering the formation of BrO₃^? and THMs, the optimal dose of NH₃ was suggested to be 0.5 mg/L.     

利用多孔陶珠固定化微生物细胞处理印染废水的研究

用自制多孔陶珠载体固定脱色混合菌,在不同pH、温度、增补营养浓度、固定化细胞与废水比率等条件对印染废水的脱色进行了试验.在最适条件下进行填充柱式反应器作扩大处理印染废水,脱色效果良好.     

工业废水生物综合毒性监测与评价

蚕豆微核、发光细菌急性毒性、鱼类急性毒性等实验基础上，采用PEEP（潜在的毒性效应）和CHIMIOTOX（预测毒性）等指数对6个重点行业的10家受试企业的工业废水生物综合毒性进行了监测与评价。结果表明，受试企业所排放废水的生物毒性均较大，迫切需要治理.