Aquatic metabolism and ecosystem health assessment using dissolved O2 stable isotope diel curves.

Dissolved O2 concentration and delta18O-O2 diel curves can be combined to assess aquatic photosynthesis, respiration, and metabolic balance, and to disentangle some of the confounding factors associated with interpretation of traditional O2 concentration curves. A dynamic model is used to illustrate how six key environmental and biological parameters interact to affect diel O2 saturation and delta18O-O2 curves, thereby providing a fundamental framework for the use of delta18O-O2 in ecosystem productivity studies. delta18O-O2 provides information unavailable from concentration alone because delta18O-O2 and saturation curves are not symmetrical and can be used to constrain gas exchange and isotopic fractionation by eliminating many common assumptions. Changes in key parameters affect diel O2 saturation and delta18O-O2 curves as follows: (1) an increase in primary production and respiration rates increases the diel range of O2 saturation and delta18O-O2 and decreases the mean delta18O-O2 value; (2) a decrease in the primary production to respiration ratio (P:R) decreases the level of O2 saturation and increases the delta18O-O2 values; (3) an increase in the gas exchange rate decreases the diel range of O2 saturation and delta18O-O2 values and moves the mean O2 saturation and delta18O-O2 values toward atmospheric equilibrium; (4) a decrease in strength of the respiratory isotopic fractionation (alphaR closer to 1) has no effect on O2 saturation and decreases the delta18O-O2 values; (5) an increase in the delta18O of water has no effect on O2 saturation and increases the minimum (daytime) delta18O-O2 value; and (6) an increase in temperature reduces O2 solubility and thus increases the diel range of O2 saturation and delta18O-O2 values. Understanding the interplay between these key parameters makes it easier to decipher the controls on O2 and delta18O-O2, compare aquatic ecosystems, and make quantitative estimates of ecosystem metabolism. The photosynthesis to respiration to gas exchange ratio (P:R:G) is better than the P:R ratio at describing and assessing the vulnerability of aquatic ecosystems under various environmental stressors by providing better constrained estimates of ecosystem metabolism and gas exchange.     

The role of sales of new motorcycles in a recent increase in motorcycle mortality rates

INTRODUCTION: The National Highway Traffic Safety Administration (NHTSA) has reported that mortality rates from crashes among motorcycle riders in the United States increased from 21.0 per 100 million motorcycle miles traveled in 1997 to 38.4 per 100 million motorcycle miles traveled in 2003. At the same time, annual domestic sales of new, on-road motorcycles increased from 247,000 in 1997 to 648,000 in 2003. METHOD: This study used data from the NHTSA Fatality Analysis Reporting System and annual sales figures for on-road motorcycles to determine if newer motorcycles were more likely to be involved in fatal crashes and if fatal crashes involving newer motorcycles could account for the mortality increase after 1997. RESULTS: Mortality rates were 7.9, 8.1, 5.4, and 2.9 per 10,000 motorcycles sold for motorcycles <1, 1-3, 4-6, and 7-11 years old, respectively, from 1994 to 2003. Assuming complete registration, the number of motorcycles sold during the 2000-2003 time period accounted for 42.4% of the total number of motorcycles registered in 2003. Motorcycles sold during 2000-2003 were associated with 52.5% of all motorcycle deaths in 2003. The increase in the number of deaths associated with motorcycles less than four years old between 1997 and 2003 accounted for 78.1% of the total increase in motorcyclist deaths over this time period. CONCLUSIONS: Two possible explanations for the association between high sales volumes and mortality rates are: (a) increased exposure from more extensive use of motorcycles when they are new; and (b) inexperience with motorcycle riding or with specific motorcycles. IMPACT ON INDUSTRY: This study suggests that the deaths of growing numbers of motorcyclists are a consequence of the financial success of the motorcycle industry.     

Application of a magnetic extraction technique to assess radionuclide-mineral association in Cumbrian shoreline sediments

An assessment has been made of the association of (239+240)Pu, 241Am and 210Po (in secular equilibrium with 210Pb) with iron minerals using a magnetic extraction technique. Grab samples of beach sand from the Cumbrian (UK) coastline were subjected to successive extractions with an approximately 0.1 T ferrite magnet and an approximately 0.3 T rare-earth magnet procedure to separate magnetic iron oxide minerals. Radionuclide concentrations in the magnetic extracts were enhanced (by approximately 4-6-fold) relative to the residue. Those in the approximately 0.1 T magnet extracts were broadly similar to those in the antiferromagnetic material extracted by the approximately 0.3 T magnet, despite the very large differences in magnetic property values between the two fractions (one to two orders of magnitude). The percentage of magnetic material in terms of mass was small and therefore, the majority of these radionuclides (on average 88%) were associated with the residue. Removal of stable Fe was incomplete. Given that the radionuclides may also bind to paramagnetic (nonmagnetic) Fe minerals, the data were extrapolated by normalising the results to quantitative Fe removal. This yielded average values of 37%, 45% and 46% for (239+240)Pu, 241Am and 210Po(210Pb), respectively, as upper limits for the fraction associated with magnetic + nonmagnetic Fe minerals. There are significant uncertainties inherent in quantifying data from this extraction technique. Nevertheless, it seems reasonable to conclude that radionuclide association with Fe minerals is unlikely to have a significant impact upon the physical dispersion of sediment contaminated by Sellafield discharges in the Irish Sea. However, it may be an important factor in governing Pu redox and redissolution behaviour.     

Comparative analysis of health risk assessments for municipal waste combustors

Quantitative health risk assessments have been performed for a number of proposed municipal waste combustor (MWC) facilities over the past several years. This article presents the results of a comparative analysis of a total of 21 risk assessments, focusing on seven of the most comprehensive methodologies. The analysis concentrates on stack emissions of noncriteria pollutants and is comparative rather than critical in nature. Overall, the risk assessment methodologies used were similar whereas the assumptions and input values used varied from study to study. Some of this variability results directly from differences in site-specific characteristics, but much of it is due to absence of data, lack of field validation, lack of specific guidelines from regulatory agencies, and reliance on professional judgment. The results indicate that carcinogenic risks are more significant than chronic non-carcinogenic risks. In most instances polychlorodibenzodioxins, polychlorodibenzofurans, and cadmium contribute more significantly to the total carcinogenic risk from MWC stack emissions than other contaminants. In addition, the contribution to total risk of all indirect routes of exposure (ingestion and dermal contact) exceeds that of the direct inhalation route for most studies reviewed.     

Environmental impact assessment in the Philippines: 1977–1985

During 1977 a Philippine environmental impact statement (EIS) system was established and the National Environmental Protection Council (NEPC) was formed to develop environmental policy. Several months after its creation, NEPC was given responsibility to certify that proposed projects met EIS system regulations. With few exceptions, this requirement to gain NEPC's approval was not taken seriously by agencies. The poor record of agency compliance with the EIS system is explained by the absence of ‘controls’ to force thorough assessments. Judicial controls are absent. Procedural and evaluative controls are in place, but NEPC has neither the budget nor the political power to enforce them. Although the national EIS system is ineffective, agencies sometimes conduct informal, ad hoc environmental assessments in response to instrumental controls exercised by international funding organizations, professional controls exerted by planners, and public controls brought about by individuals and groups who would be adversely affected by projects.     

Dominance of the odometer over serial landmark learning in honeybee navigation

Honeybees use their visual flow field to measure flight distance. It has been suggested that the experience of serial landmarks encountered on the flight toward a feeding place contributes to distance estimation. Here, we address this question by tracing the flight paths of individual bees with a harmonic radar system. Bees were trained along an array of three landmarks (tents), and the distance between these landmarks was either increased or decreased under two test conditions. We find that absolute distance estimation dominates the search for the feeding place, but serial position effects are also found. In the latter case, bees search only or additionally at locations determined by serial experience of the landmarks.     

Post-conflict health reconstruction: search for a policy

Despite increasing experience in health reconstruction in societies emerging from conflict, the policy basis for investing in the development of equitable and effective health systems in the wake of war remains unsettled. Consideration of post-conflict health reconstruction is almost entirely absent in donor policies on global health. Practically by default, health programmes are seen increasingly as an element of stabilisation and security interventions in the aftermath of armed conflict. That perspective, however, lacks an evidence base and can skew health programmes towards short-term security and stabilisation goals that have a marginal impact and violate the principles of equity, non-discrimination, and quality, which are central to sound health systems and public acceptance of them. A better approach is to ground policy in legitimacy, viewing health both as a core social institution and one that, if developed according to human rights principles, including equity, non-discrimination, participation and accountability, can advance the effectiveness and the quality of governance in the emerging state.     

High-Biomass Forests of the Pacific Northwest: Who Manages Them and How Much is Protected?

To examine ownership and protection status of forests with high-biomass stores (>200 Mg/ha) in the Pacific Northwest (PNW) region of the United States, we used the latest versions of publicly available datasets. Overlay, aggregation, and GIS-based computation of forest area in broad biomass classes in the PNW showed that the National Forests contained the largest area of high-biomass forests (48.4 % of regional total), but the area of high-biomass forest on private lands was important as well (22.8 %). Between 2000 and 2008, the loss of high-biomass forests to fire on the National Forests was 7.6 % (236,000 ha), while the loss of high-biomass forest to logging on private lands (364,000 ha) exceeded the losses to fire across all ownerships. Many remaining high-biomass forest stands are vulnerable to future harvest as only 20 % are strictly protected from logging, while 26 % are not protected at all. The level of protection for high-biomass forests varies by state, for example, 31 % of all high-biomass federal forests in Washington are in high-protection status compared to only 9 % in Oregon. Across the conterminous US, high-biomass forest covers <3 % of all forest land and the PNW region holds 56.8 % of this area or 5.87 million ha. Forests with high-biomass stores are important to document and monitor as they are scarce, often threatened by harvest and development, and their disturbance including timber harvest results in net C losses to the atmosphere that can take a new generation of trees many decades or centuries to offset.     

Modeling atmospheric mercury deposition in the vicinity of power plants

Two mathematical models of the atmospheric fate and transport of mercury (Hg), an Eulerian grid-based model and a Gaussian plume model, are used to calculate the atmospheric deposition of Hg in the vicinity (i.e., within 50 km) of five coal-fired power plants. The former is applied using two different horizontal resolutions: coarse (84 km) and fine (16.7 km). More than 96% of the power plant Hg emissions are calculated with the plume model to be transported beyond 50 km from the plants. The grid-based model predicts a lower fraction to be transported beyond 50 km: >91% with a coarse resolution and >95% with a fine resolution. The contribution of the power plant emissions to total Hg deposition within a radius of 50 km from the plants is calculated to be <8% with the plume model, <14% with the Eulerian model with a coarse resolution, and <10% with the Eulerian model with a fine resolution. The Eulerian grid-based model predicts greater local impacts than the plume model because of artificially enhanced vertical dispersion; the former predicts about twice as much Hg deposition as the latter when the area considered is commensurate with the resolution of the grid-based model. If one compares the local impacts for an area that is significantly less than the grid-based model resolution, then the grid-based model may predict lower local deposition than the plume model, because two compensating errors affect the results obtained with the grid-based model: initial dilution of the power plant emissions within one or more grid cells and enhanced vertical mixing to the ground.     

In-situ application of colloidal activated carbon for PFAS-contaminated soil and groundwater: A Swedish case study

Soil and groundwater contamination by per- and polyfluoroalkyl substances (PFAS) has been a significant concern to human health and environmental quality. Remediation of contaminated sites is crucial to prevent plume expansion but can prove challenging due to the persistent nature of PFAS combined with their high aqueous mobility. In this case study, we investigated the potential of colloidal activated carbon (CAC) for soil stabilization at the pilot scale, aiming to entrap PFAS and prevent their leaching from soil into groundwater. Monitoring of the site revealed the presence of two potential sources of PFAS contamination at concentrations up to 23 μg L⁻¹ for ∑₁₁PFAS in groundwater. After CAC application, initial results indicated a 76% reduction of ∑₁₁PFAS and high removal rates for long-chain PFAS, such as perfluorooctane sulfonic acid and perfluorooctanoic acid. A spike in concentrations was noticed 6 months after injection of CAC, showing a rebound of the plume and a reduction of treatment effectiveness. Based on long-term monitoring data, the treatment effectiveness for ∑₁₁PFAS dropped to 52%. The rebound of concentrations was attributed to the plume bypass of the barrier due to the presence of high conductivity zones, which likely occurred because of seasonal changes in groundwater flow directions or the CAC application at the site. This demonstrates the need for a detailed and accurate hydrogeological understanding of contaminated sites before designing and applying stabilization techniques, especially at sites with high geologic and hydrologic complexity. The results herein can serve as a guideline for treating similar sites and help avoid potential pitfalls of remedial efforts.