Polycyclic aromatic hydrocarbons in benthos of the northern Bering Sea Shelf and Chukchi Sea Shelf

Eighteen polycyclic aromatic hydrocarbons (PAHs) were detected in benthos collected onboard the ‘Snow Dragon’ in the Northern Bering Sea Shelf and Chukchi Sea Shelf during the 6^th Chinese National Arctic Research Expedition (CHINARE 2014). Σ₁₈PAHs for all biota samples ranged from 34.2 to 128.1 ng/g dry weight (dw), with the highest concentration observed in fish muscle (Boreogadus saida) samples close to St. Lawrence Island. The PAH composition pattern was dominated by the presence of lighter 3 ring (57%) and 2 ring (28%) PAHs, indicating oil-related or petrogenic sources as important origins of PAH contamination. Concentrations of alkyl-PAHs (1-methylnaphthalene and 2-methylnaphthalene) were lower than their parent PAH (naphthalene) in all biological tissue, and their percentage also decreased significantly (p<0.05) compared with those in the corresponding sediment. There were no significant relationships between PAH concentrations and trophic levels, which is possibly due to the combined results of the complex benthic foodweb in the subarctic/Arctic shelf region, as well as a low assimilation/effective metabolism for PAHs. According to toxic potency evaluation results from TCDD toxic equivalents (TEQs) and BaP-equivalent (BaPE) values, whelk (Neptunea heros) and starfish (Ctenodiscus crispatus) are two macroinvertebrate species showing relatively higher dioxin-like toxicity and carcinogenic risk.     

Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

中温期和高温期污泥堆肥物料中典型氟喹诺酮类抗生素去除的影响因素

污泥处理后土地利用是氟喹诺酮类抗生素（fluoroquinolones,FQs）进入土壤环境的主要途径之一。好氧堆肥具有高效去除FQs、削减其环境风险的潜力,但目前对于堆肥过程中各阶段物料FQs去除影响因素的研究仍较少。该研究在制备典型城市污泥好氧堆肥获取其中温期、高温期物料的基础上,向堆肥中添加2种典型的FQs（ofloxacin,OFL;norfloxacin,NOR）,在不同FQs初始浓度（0,2.5,5.0 mg/kg）、含水率（50%、60%、70%）和通风量（0,15 mL/min）条件下,进行56 d的抗生素去除试验,控制各堆肥物料在其对应堆肥阶段温度（中温期物料,35℃;高温期物料,55℃）。结果表明:2种物料中FQs去除率均随着初始浓度上升而逐步下降,中温期物料最佳初始FQs浓度分别为5.0 mg/kg（OFL）、2.5 mg/kg（NOR）,对于高温期物料两者均为2.5 mg/kg;中温期物料中,FQs去除率随含水率增加先上升后下降,最佳含水率均为60%,高温期物料中,FQs去除率随含水率升高而逐步增加;2种物料中,通风量15 mL/min下的FQs去除率均明显高于未通风处理。与中温期物料对比,高温期物料中FQs去除过程需要较低的初始浓度和较高的含水率;在2种物料中,充分通风下FQs的去除率均明显高于未通风处理。     

含油污泥处理技术进展

石油工业生产的特征固体废物——含油污泥,是一种由石油烃、水、固体颗粒物和其他物质（如重金属）组成的固态/半固态复合物,因毒性和易燃性被归入危险废物管理。我国含油污泥年产量高达500万t,其中含有15%~50%的石油烃。含油污泥的处理要兼顾无害化和资源化。基于其组成、性质和危害,介绍了含油污泥的油品资源化分离法（离心、溶剂萃取、热解）和无害化剩余含油残渣处理法（焚烧、固化、生物处理）等国内外常用的处理方法。大体上,含油污泥的处理思路为,首先预处理降低含水率、提高含油率,再经油品分离法回收含油污泥中的石油烃,最后无害化处理剩余含油残渣。讨论了各方法的特点以及国内外研究进展,提出了含油污泥处理技术的发展建议。     

北京市典型汽修企业VOCs排放特征与臭氧影响分析

对北京地区27家汽修企业进行调研,选取2家典型汽修企业进行气袋采样-GC-MS-FID采集及分析,定量分析其VOCs的排放特征,并计算其臭氧生成潜势（OFP）。结果表明:使用不同漆料的汽修企业排放特征不同,水性漆企业非甲烷总烃的排放浓度为0.62~36.49 mg/m3,油性漆企业的排放浓度为0~100.39 mg/m3;水性漆排放的VOCs以烷烃为主,占比高达57.16%,丙烷（39.65%）和甲苯（11.41%）是首要污染物;卤代烃（55.51%）是油性漆企业的主要VOCs排放物种,主要组分为1,2-二氯丙烷和1,2-二氯乙烷;水性漆企业的OFP值为144.78 mg/m3,油性漆企业的OFP值为664.43 mg/m3,大气反应活性最大的物种多为芳香烃,芳香烃对OFP的贡献率分别为52.18%和88.44%。     

新时代国土整治与生态修复转型思考

针对全球变化影响下的国土空间和生态系统,生态文明建设和国土空间规划是中国在新时代的积极响应,国土整治与生态修复的转型和提升成为必然要求。在介绍国土整治与生态修复概念内涵的基础上,指出中国国土空间生态环境问题的复杂性和生态文明建设的新理念要求决定了国土整治与生态修复的转型。从工作理念、理论基础、技术体系和制度建设等方面,分析了当前国土整治与生态修复工作中存在的不足,主要包括整体综合理念滞后、理论基础体系欠缺、技术支撑相对薄弱、体制机制不尽完善等方面。针对这些不足,提出了新时代国土整治与生态修复转型的路径和策略,主要策略包括强化系统思维、提升理论体系、加强技术支撑、完善机制建设等内容,以期为国土整治与生态修复推进美丽中国建设提供科学依据。     

组配改良剂联合硅肥对Cd污染稻田的修复效果

选取湖南省浏阳市某Cd污染稻田进行田间试验,研究组配改良剂石灰石+海泡石（LS）、基施硅肥及叶面喷施硅肥对Cd污染稻田修复效果,结果表明：（1）基施硅肥90kg/hm²和叶面喷施硅肥（0.2,0.4g/L）对土壤pH值无明显影响,添加LS（2250,4500kg/hm²）的各处理均显著提高土壤pH值（P < 0.05）.（2）基施硅肥90kg/hm²分别降低土壤交换态、毒性特征浸出（TCLP）提取态Cd含量20.0%和18.5%,叶面喷施硅肥对土壤Cd两种提取态含量无明显影响,添加LS的各处理（2250,4500kg/hm²）分别使土壤交换态、TCLP提取态Cd含量降低25.8%~49.9%、26.4%~44.5%.（3）3种单一技术措施均能明显降低水稻各部位Cd含量,但降低糙米中Cd含量的效果低于3种技术措施的组合处理;“组配改良剂LS+基施硅肥+叶面喷施硅肥”各处理（JL1F1、JL1F2、JL2F1、JL2F2）使水稻糙米中Cd含量降低25.6%~70.5%.（4）“组配改良剂LS+基施硅肥+叶面喷施硅肥”的组合技术处理能显著降低土壤中Cd的有效性,显著降低水稻各部位中Cd含量,其中JL2F2处理效果最佳,能使对照糙米Cd含量从0.66mg/kg降低到0.19mg/kg,实现中重度Cd污染稻田的水稻安全生产.     

烟花爆竹燃放对大气污染物及PM2.5组分影响

为了解烟花爆竹燃放对保定市大气污染物和PM_2.5中水溶性离子及有机碳（OC）、元素碳（EC）浓度的影响,对保定市春节期间大气污染物和颗粒物组分的浓度特征进行了分析,并评估了烟花爆竹的贡献.结果表明： 2019年春节期间烟花爆竹集中燃放期PM_2.5、PM₁₀、SO₂、NO₂、CO平均浓度比非集中燃放期分别增加了1.3、1.0、1.1、0.4、0.02倍;保定市春节期间禁燃措施施行后,除夕、初一2d污染物平均浓度、最高浓度和高浓度持续时间均明显下降,集中燃放期烟花爆竹燃放对PM_2.5、PM₁₀和SO₂浓度贡献量从50%左右（2018年、2017年）下降至30%左右（2019年）,其中SO₂贡献量下降幅度超过PM_2.5和PM₁₀;组分分析表明,接待中心站点（主城区）、涿州站点（区县建成区）烟花爆竹燃放期K⁺、Mg²⁺、Cl^-浓度在水溶性离子中的总占比分别为39.3%、51.1%,比非燃放期的占比显著上升;烟花爆竹燃放对PM_2.5中K⁺、Mg²⁺、Cl^-浓度贡献率在50%以上,其中对K⁺贡献占比高达89.0%,涿州站点SO₄^2-、K⁺、Mg²⁺、Cl^-的贡献量分别是接待中心站点的2.2、2.1、1.9、1.8倍,燃放期硫氧化率（SOR）、氮氧化率（NOR）相比于非燃放期均有一定程度的升高;集中燃放期OC、EC浓度较非集中燃放期分别升高了2.5、2.1倍,烟花爆竹燃放对OC影响大于EC.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.