新型溴代阻燃剂TBB和TBPH混合物对罗非鱼甲状腺激素和生理生化指标的影响

为了研究新型溴代阻燃剂FM550的生态风险,以罗非鱼为模式生物,配制添加不同浓度FM550(0、10、100和400ng·g~(-1))的饲料,将罗非鱼暴露56 d后,研究不同暴露剂量条件下FM550对罗非鱼甲状腺激素以及血清生理生化指标的影响。研究表明,经不同浓度的FM550暴露56 d后,罗非鱼的基础生长数据并无显著变化,但罗非鱼的甲状腺激素水平发生改变,具体表现为高剂量的FM550暴露可以使罗非鱼血清中的三碘甲状腺原氨酸(T3)、游离三碘甲状腺原氨酸(FT3)含量降低,四碘甲状腺原氨酸(T4)、游离四碘甲状腺原氨酸(FT4)含量升高。同时,FM550的暴露还可以导致罗非鱼的脂代谢改变,具体变化为血清总胆固醇(TC)、甘油三酯(TG)含量降低,高密度脂蛋白(HDL-C)含量升高,低密度脂蛋白(LDL-C)含量降低。不同剂量的FM550暴露对罗非鱼的全血生化指标并无影响。     

海洋酸化与重金属、有机污染物和人工纳米颗粒的联合毒性效应研究进展

由于大量人类活动的影响,大气CO_2浓度持续增加,其中约1/3被海洋吸收,导致表层海水pH值降低和碳酸盐平衡体系波动,即"海洋酸化"现象。污染物的海洋环境效应一直是全球环境科学领域研究的热点。在实际环境中,海洋酸化往往与污染物共同存在并作用于海洋生态系统,且海洋酸化极有可能改变污染物的海洋环境行为从而影响其毒性效应。但现有研究大多针对海洋酸化或者污染物单独作用下的毒性效应展开,对海洋酸化与污染物的联合毒性效应的研究不足、亟待加强。为此,综述了近年来海洋酸化与典型污染物(重金属、有机污染物)及新型污染物(人工纳米颗粒)的相关文献,重点阐述了海洋酸化对污染物环境行为的影响和海洋酸化与污染物对海洋生物的联合毒性效应,指出当前的研究不足,并对未来的研究方向进行了展望。     

紫外吸收剂在湖泊中的分布及其对底栖动物的毒性效应

紫外吸收剂大量用于工业材料和个人护理品中,近年来在水体中不断被检出,同时由于其高度亲脂性,易在底泥和水生生物体内富集,产生潜在的毒性效应,已成为一类新型污染物。本文综述了紫外吸收剂在湖泊环境中的分布和生物富集效应,重点分析了二苯甲酮类等典型紫外吸收剂对底栖动物的药物代谢系统、抗氧化系统及其生长发育的影响及其毒性作用机制,并对未来该领域的研究进行了展望。     

基于PBPK模型评价三氯乙烯的职业暴露健康风险

三氯乙烯(TCE)作为脱脂和清洗剂被广泛应用于五金、电镀和电子等行业。TCE的职业暴露会产生一系列健康风险,包括过敏症和致癌等。2012年TCE被美国环保局(US EPA)和国际癌症研究机构列为1类致癌物。采用吸附管采样-热脱附/气相色谱-质谱法分析了大连市某企业车间生产工况下空气中TCE浓度。基于生理学的药代动力学(PBPK)模型预测了呼吸暴露途径下TCE在职业工人体内组织中的动态分布、代谢产物生成情况和致癌风险。TCE在不同组织中预测的最大浓度呈现出脂肪肠充分灌注室支气管非充分灌注室肝脏静脉血动脉血的趋势。预测的与致癌有关的代谢产物最大浓度表现为三氯乙酸二氯乙酸三氯乙醛S-二氯乙烯基-L-半胱氨酸。在监测的TCE水平(39.2±24.4)μg·m-3下,暴露8 h·d-1,连续暴露20年,基于外暴露评价的职业工人致癌风险均值为1.31×10-5,该暴露水平下,基于PBPK模型预测的TCE内暴露与外暴露计算的致癌风险水平相近,但基于具有致癌性主要代谢产物的内暴露致癌风险值是外暴露风险值的1.17～1.73倍。TCE的暴露水平越高,基于内暴露方法和外暴露方法的致癌风险评价结果差异越大。敏感性分析表明,心输出血流量和充分灌注室血流量对PBPK模型输出结果具有重要影响。不确定性分析表明,模型参数变化会显著地影响PBPK模型输出结果,但变异在可接受水平。本研究结果说明,评价TCE暴露对人的致癌风险需要考虑其在体内的分布和代谢过程。     

贵州省旱田土壤N2O释放及其环境影响因素

以贵州省的玉米－油菜轮作田、大豆－冬小麦轮作和休耕地为研究对象,采用密闭箱－气相色谱法,对整个轮作期的土壤Ｎ₂Ｏ释放进行观测,初步研究我国亚热带旱田的Ｎ₂Ｏ释放特征．实验研究结果表明,３试验田Ｎ₂Ｏ释放通量具有相同的规律性日变化形式,秋收作物达通量极大值的时间比越冬作物滞后２ｈ～３ｈ,气温是控制Ｎ₂Ｏ通量日变化的主要环境因子：３试验田Ｎ₂Ｏ释放通量（以Ｎ₂Ｏ中的Ｎ计）分别在９．８１～４３３．１１,４．００～１８０．４１和９．７４～２８２．００μｇ·ｍ^-2·ｈ^-1,高于我国水田和北方旱田的Ｎ₂Ｏ释放通量;进一步分析表明,３试验田Ｎ₂Ｏ释放通量具有相同的季节变化模式,Ｎ₂Ｏ 释放峰受降雨事件的直接影响,Ｎ₂Ｏ通量与降雨量和土壤湿度间有显著的正相关性,而与温度的关系不明显     

Decomposition of SF6 in an RF Plasma Environment

Abstract

Sulfur hexafluoride (SF₆)-contained gas is a common pollutant emitted during the etching process used in the semiconductor industry. This study demonstrated the application of radio-frequency (RF) plasma in the decomposition of SF₆. The decomposition fraction of SF₆ [η_SF6 (C_in–C_out)/C_in x 100%] and the mole fraction profile of the products were investigated as functions of input power and feed O₂/SF₆ ratio in an SiO₂ reactor. The species detected in both SF₆/Ar and SF₆/O₂/Ar RF plasmas were SiF₄, SO₂, F₂, SO₂F₂, SOF₂, SOF₄, S₂F₁₀, S₂OF₁₀, S₂O₂F₁₀, and SF₄. The results revealed that at 40 W, η_SF6 exceeded 99%, and the reaction products were almost all converted into stable compounds such as SiF₄, SO₂, and F₂ with or without the addition of oxygen. Sulfur oxyfluorides such as SO₂F₂, SOF₂, SOF₄, S₂OF₁₀, and S₂O₂F₁₀ were produced only below 40 W. The results of this work can be used to design a plasma/chemical system for online use in a series of a manufacturing process to treat SF₆-containing exhaust gases.     

Analysis of a Summertime PM2.5 and Haze Episode in the Mid-Atlantic Region

Abstract

Observations of the mass and chemical composition of particles less than 2.5 μm in aerodynamic diameter (PM_2.5), light extinction, and meteorology in the urban Baltimore-Washington corridor during July 1999 and July 2000 are presented and analyzed to study summertime haze formation in the mid-Atlantic region. The mass fraction of ammoniated sulfate (SO₄ ^2-) and carbonaceous material in PM_2.5 were each ～50% for cleaner air (PM_2.5 < 10 μg/m³) but changed to ～60% and ～20%, respectively, for more polluted air (PM_2.5 > 30 μg/m³). This signifies the role of SO₄ ^2- in haze formation. Comparisons of data from this study with the Interagency Monitoring of Protected Visual Environments network suggest that SO₄ ^2? is more regional than carbonaceous material and originates in part from upwind source regions. The light extinction coefficient is well correlated to PM_2.5 mass plus water associated with inorganic salt, leading to a mass extinction efficiency of 7.6 ± 1.7 m²/g for hydrated aerosol. The most serious haze episode occurring between July 15 and 19, 1999, was characterized by westerly transport and recirculation slowing removal of pollutants. At the peak of this episode, 1-hr PM_2.5 concentration reached ～45 μg/m³, visual range dropped to ～5 km, and aerosol water likely contributed to ～40% of the light extinction coefficient.     

The Reuse of Biosludge as an Adsorbent from a Petrochemical Wastewater Treatment Plant

Abstract

Biosludge was obtained from a petrochemical industry’s biological wastewater treatment plant. Zinc chloride (ZnCl₂) was used as a sludge activation agent during the pyrolytic process. Scanning electron microscope (SEM) image photographs, element composition, surface functional group, and pore structure were analyzed for the sludge adsorbent characteristics. Results indicated the proper ZnCl₂-immersed concentration, pyrolytic temperature, and time could produce adsorbent from the bio-sludge. The optimal conditions for a larger surface area adsorbent were 3 M ZnCl₂-immersed sludge pyrolyzed at 600 °C for 30 min and washed with 3 N hydrochloric acid (HCl) solution and distilled water. The predominant pore size of the sludge adsorbent was the mesopore.     

Inorganic Acid Emission Factors of Semiconductor Manufacturing Processes

Abstract

A huge amount of inorganic acids can be produced and emitted with waste gases from integrated circuit manufacturing processes such as cleaning and etching. Emission of inorganic acids from selected semiconductor factories was measured in this study. The sampling of the inorganic acids was based on the porous metal denuders, and samples were then analyzed by ion chromatography. The amount of chemical usage was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County according to the Taiwan Environmental Protection Agency regulation. The emission factor is defined as the emission rate (kg/month) divided by the amount of chemical usage (L/month). Emission factors of three inorganic acids (i.e., hydrofluoric acid [HF], hydrochloric acid [HQ], and sulfuric acid [H₂SO₄]) were estimated by the same method. The emission factors of HF and HCl were determined to be 0.0075 kg/L (coefficient of variation [CV] = 60.7%, n = 80) and 0.0096 kg/L (CV = 68.2%, n = 91), respectively. Linear regression equations are proposed to fit the data with correlation coefficient square (R²) = 0.82 and 0.9, respectively. The emission factor of H₂SO₄, which is in the droplet form, was determined to be 0.0016 kg/L (CV = 99.2%, n = 107), and its R² was 0.84. The emission profiles of gaseous inorganic acids show that HF is the dominant chemical in most of the fabricators.