Cyanide generation during preservation of chlorinated wastewater effluent samples for total cyanide analysis.

Dechlorinating agents and pH adjustment are often used to preserve wastewater samples for cyanide analysis. The effects of four approved preservation protocols on the results of the total cyanide analysis of effluents from four water reclamation plants were examined. The results differed widely, and a clear pattern emerged. Immediate analysis without pH adjustment generally gave total cyanide concentrations below the reporting limit of 5 microg/L, irrespective of the dechlorinating agents used. When the pH was adjusted to > or =12, a slight increase in the measured total cyanide concentration was observed when thiosulfate was used to dechlorinate the samples, and a significant increase (>10 microg/L) was observed when arsenite was used as the dechlorinating agent. These results provide evidence that approved preservation protocols may give rise to cyanide formation in chlorinated wastewater effluent matrices.     

Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part I: field study

The objective of this work was to study the use of new biodegradable films in agriculture under open field conditions. Three biodegradable mulch films made from modified biodegradable polyester of different thicknesses and colors (black and white) and a conventional low density polyethylene (LDPE) mulch film were used to cover the beds of tomato plants. Changes in physical appearance of the films were recorded as well as changes in their mechanical, optical, and physical properties. Once tomato harvest was completed, the conventional LDPE mulch film was removed and all the tomato plants were cut using a mower. The biodegradable mulch films were plowed into the soil. The change in the appearance of the film was recorded and samples of each film after plowing were characterized according to the properties mentioned above. After the biodegradable films photodegraded, cross-link formation occurred within the films which promoted brittleness. Titanium dioxide, an additive used to produce white color in the films, catalyzed the photodegradation, while carbon black used for black color stabilized the photodegradation. The white films started to degrade after two weeks while it took about eight weeks for the black films to significantly degrade. The black biodegradable film seems to be a more promising alternative as a mulch film because of the comparable yields and weed suppression ability to conventional mulch film.     

Perfluorooctane surfactants in waste waters, the major source of river pollution

Perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) are persistent and widely distributed in the environment. Recently, the discharge of municipal waste water has been shown to be an important route of such perfluoroalkyl surfactants into the aquatic environment. The aim of this study was to assess the mass flow of PFOA and PFOS from typical waste water treatment plants (WWTPs) into surface waters. Samples were collected at different stages of treatment of four WWTPs in Northern Bavaria, Germany, and from the rivers receiving the treated waste waters (WW). The outflow of PFOA from the WWTPs to the rivers was 20-fold higher than the inflow to the plants; about a tenth was removed with the sludge. For PFOS, the increase from inlet to outlet was about 3-fold; almost half of it was retained in the sludge. Both surfactants were released into river water from the WWTP of a medium-sized city with domestic, industrial and commercial waste waters; in domestic waste waters the surfactants were found at much lower levels.     

Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part II: laboratory simulated conditions

In a previous paper, we demonstrated that the main mechanism of degradation of poly(butylene adipate-co-terephthalate) (PBAT) biodegradable mulch films when exposed to field conditions was crosslinking due to the photodegradation from solar radiation. The aim of this work was to determine the effect of crosslinking on the biodegradability of PBAT samples. PBAT films were subjected to UV photodegradation in laboratory simulated conditions to investigate the effects of crosslinking and other major changes in the structure and mechanical properties of the films. Crosslinking caused the films to become more brittle and produced a reduction of the tensile strength and percent elongation. Besides the crosslinking degradation mechanism, chain scission also occurred in the samples. After 45d of biodegradation test, the non-crosslinked PBAT sample reached 60% of mineralization. However, the percent mineralization was reduced when samples were crosslinked. The percent mineralization of samples with 10%, 30%, 50%, and 70% gel content was 36%, 43%, 21%, and 24%, respectively. Our results indicate that crosslinking is a key process underlying the degradation of the PBAT film and did affect the biodegradability of the films, since the samples with greater amount of gel content generally showed less percent mineralization in the biodegradation tests.     

Mercury deposition/accumulation rates in the vicinity of a lead smelter as recorded by a peat deposit

Mercury (Hg) concentration profiles and historical accumulation rates were determined in three ²¹⁰Pb-dated cores from a peat deposit in the vicinity of a lead (Pb) smelter at Příbram, Czech Republic. The Hg concentrations in peat samples ranged from 66 to 701 μg kg⁻¹. Cumulative Hg inventories from each core (for the past 150 yr) varied by a factor of 1.4 (13.6–18.5 mg Hg m⁻²), indicating variations of net Hg accumulation rate within the peat deposit. Historical changes in vegetation cover (leading to variable interception by trees) are probably responsible for this variation in space and time. The uncorrected Hg accumulation rates peaked between the 1960s and 1980s (up to 226 μg m⁻² yr⁻¹). Recent findings show that Hg records from peat tend to overestimate historical levels of Hg deposition. Therefore we used the mass loss compensation factor (MLCF) to normalize Hg accumulation rates. These corrected Hg accumulation rates were significantly lower (maximum 129 μg m⁻² yr⁻¹) and better corresponded to changes in historical smelter emissions, which were highest in the 1960s. The agreement between the corrected Hg accumulation rates in the uppermost peat sections (2–38 μg m⁻² yr⁻¹) and biomonitoring of atmospheric deposition by mosses in several recent years (4.7–34.4 μg m⁻² yr⁻¹) shows the usefulness of MLCF application on Hg accumulation in peat archives. However, the MLCF correction was unsuitable for Pb. The recent Pb deposition rates obtained by an independent biomonitoring study using mosses (0.5–127 mg m⁻² yr⁻¹) were better correlated with net Pb accumulation rates recorded in peat (7–145 mg m⁻² yr⁻¹) than with corrected rates obtained by the MLCF approach (1–28 mg m⁻² yr⁻¹).     

Sub-tropical urban environment affecting content and composition of non-structural carbohydrates of Lolium multiflorum ssp. italicum cv. Lema

This study analyzed the relationship between environmental factors, especially air pollution and climatic conditions, and non-structural carbohydrates (NSC) in plants of Lolium multiflorum exposed during 10 consecutive periods of 28 days at a polluted site (Congonhas) and at a reference site in São Paulo city (Brazil). After exposure, NSC composition and leaf concentrations of Al, Fe, Cu, Zn, Pb and Cd were measured. The seasonal pattern of NSC accumulation was quite similar in both sites, but plants at Congonhas showed higher concentrations of these compounds, especially fructans of low and medium degree of polymerization. Regression analysis showed that NSC in plants growing at the polluted site were explained by variations on temperature and leaf concentration of Fe (positive effect), as well as relative humidity and particulate material (negative effect). NSC in the standardized grass culture, in addition to heavy metal accumulation, may indicate stressing conditions in a sub-tropical polluted environment.     

Evaluation of the use of diffusive air samplers for determining temporal and spatial variation of volatile organic compounds in the ambient air of urban communities

The Houston-Galveston metropolitan area has a relatively high density of point and mobile sources of air toxics, and determining and understanding the relationship between emissions and ambient air concentrations of air toxics is important for evaluating potential impacts on public health and formulating effective regulatory policies to control this impact, both in this region and elsewhere. However, conventional ambient air monitoring approaches are limited with regard to expense, siting limitations, and representative sampling necessary for adequate exposure assessment. The overall goal of this multiphase study is to evaluate the use of simple passive air samplers to determine temporal and spatial variability of the ambient air concentrations of selected volatile organic compounds (VOCs) in urban areas. Phase 1 of this study, reported here, was a field evaluation of 3M organic vapor monitors (OVMs) involving limited comparisons with commonly used active sampling methods, an assessment of sampler precision, a determination of optimal sampling duration, and an investigation of the utility of a simple modification of the commercial sampler. The results indicated that a sampling duration of 72 hr exhibited generally low bias relative to automated continuous gas chromatography measurements, good overall precision, and an acceptable number of measurements above detection limits. The modified sampler showed good correlation with the commercial sampler, with higher sampling rates, although lower than expected.     

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm(3)s(-1) standard temperature and pressure conditions.     

Species-dependent chromium accumulation, lipid peroxidation, and glutathione levels in germinating kiwifruit pollen under Cr(III) and Cr(VI) stress

The accumulation of chromium by germinating kiwifruit pollen appears to be significantly affected by Cr species, Cr concentration and calcium availability. Cr(III) accumulation always occurred in a linear manner while Cr(VI) uptake followed a logarithmic model. In the absence of exogenous calcium, Cr(III) accumulation was much higher than that of Cr(VI). It was observed that, as the Cr(III) concentration increased, there was a significant decrease in the endogenous calcium content of pollen, ultimately leading to complete calcium depletion after 90 min of incubation at 150 microM Cr(III). This loss of calcium could be responsible for the strong inhibition of tube emergence and growth following exposure of pollen to Cr(III). Indeed, when exogenous calcium was added to the kiwifruit pollen culture medium, significant growth recovery and reduced Cr(III) uptake occurred; the opposite was true in Cr(VI)-treatments. A significant rise in lipid peroxide production occurs in the presence of both Cr species; the effect was more pronounced following Cr(VI) exposure. Finally, glutathione pool dynamics appears to be differentially affected by chromium species and concentrations. In conclusion, results of the present study have provided important information regarding the different activity profiles of Cr(III) and Cr(VI) in relation to kiwifruit pollen performance, and have also demonstrated differences in some biochemical responses of pollen to metal stress.     

Serum levels of PCDDs, PCDFs and PCBs in non-occupationally exposed population groups living near two incineration plants in Tuscany, Italy

A pilot study was carried out in Tuscany, Italy, to provide preliminary information on the concentrations of polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorobiphenyls (DL-PCBs), and selected non-dioxin-like PCBs (NDL-PCBs) in groups of subjects living in the vicinity of two incineration plants. Seventy-four volunteers were enrolled from areas identified as under a potential impact from incinerator emissions and from not exposed areas. No significant differences were observed between subjects living in the two types of areas. Total concentrations of PCDDs, PCDFs, and DL-PCBs resulted to be in the range 23-30 pg WHO-TEQ g(-1), lipid base, for subjects in the 27-54 year age groups, while concentrations increased to 40-44 pgTEQ g(-1) for the two 55-67 year age groups. The levels of PCDDs and PCDFs were in good agreement with those observed for unexposed population groups in Italy, while the contribution to total TEQ from DL-PCBs was appreciably higher than those currently observed in the general population in Italy and other countries. As to NDL-PCBs, serum levels of the six "indicator" congeners were in the range 240-300 ng g(-1), lipid base, for subjects in the 27-54 year age groups. A raise in NDL-PCB body burden (430-470 ng g(-1), lipid base) was observed for the two 55+ year age groups, in agreement with the expected age-dependent increase. The findings from this study do not show an incremental exposure to PCDDs and PCDFs in the samples from subjects living around the two incineration plants, whereas PCB congener profiles in all samples suggest a possible impact on the area of interest of industrial activities from near industrial settlements.