Detection of hormones in surface and drinking water in Brazil by LC-ESI-MS/MS and ecotoxicological assessment with <Emphasis Type="Italic">Daphnia magna</Emphasis>

The growing use of pharmaceutical drug is mainly due to several diseases in human and in animal husbandry. As these drugs are discharged into waterways via wastewater, they cause a major impact on the environment. Many of these drugs are hormones; in which even at low concentrations can alter metabolic and physiological functions in many organisms. Hormones were found in surface water, groundwater, soil, and sediment at concentrations from nanograms to milligrams per liter of volume—quantities known to cause changes in the endocrine system of aquatic organisms. This study aimed to develop a methodology for hormone detection (estriol, estrone, 17β-estradiol, 17α-ethinylestradiol, progesterone, and testosterone) on surface and treated water samples. Sample toxicity was assessed by ecotoxicology tests using Daphnia magna. A liquid chromatograph coupled to a mass spectrometer with an electrospray ionization source (LC-ESI-MS/MS) was used for the analysis. The results showed that samples were contaminated by the hormones estriol, estrone, progesterone, 17β-estradiol, and 17α-ethinylestradiol during the sampling period, and the highest concentrations measured were 90, 28, 26, 137, and 194 ng·L^?1, respectively. This indicates the inflow of sewage containing these hormones at some points in the Piracicaba River in the State of Sao Paulo—Brazil. Results indicated little toxicity of the hormone estriol in D. magna, indicating that chronic studies with this microcrustacean are necessary.     

Chronic copper exposure and fatty acid composition of the amphipod Dikerogammarus villosus: results from a field study

Field study allows assessment of long-term effects on fatty acid (FA) composition of organisms under chronic exposure to metals. One expected effect of copper is peroxidation of lipids and essentially polyunsaturated fatty acids (PUFA). FA analysis was established for the amphipod Dikerogammarus villosus subjected to different degrees of copper exposure (4–40 μg Cu L⁻¹). A previous study in our team showed that this species regulates its body Cu concentration (106–135 mg Cu kg⁻¹ dry weight). Despite the high capacity of bioaccumulation, the absence of a correlation between copper concentration in D. villosus and water prevents its use as bioindicator of copper pollution. Both sexes from the most polluted site showed the lowest total FA content, but the highest PUFA percent, mainly of the long-chained variety (C20–C22). Mechanisms leading to the prevention of lipid peroxidation in this species were discussed (metallothioneins and intracellular granules) and proposed with support from literature data.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at lambda = 254 nm. The photolysis of (alpha + beta: 2 + 1) endosulfan, alpha-endosulfan and beta-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 x 10(-4) s(-1); 1 x 10(-4) s(-1); and 2 x 10(-5) s(-1), respectively, and the calculated quantum yields (phi) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.     

Cyanide generation during preservation of chlorinated wastewater effluent samples for total cyanide analysis.

Dechlorinating agents and pH adjustment are often used to preserve wastewater samples for cyanide analysis. The effects of four approved preservation protocols on the results of the total cyanide analysis of effluents from four water reclamation plants were examined. The results differed widely, and a clear pattern emerged. Immediate analysis without pH adjustment generally gave total cyanide concentrations below the reporting limit of 5 microg/L, irrespective of the dechlorinating agents used. When the pH was adjusted to > or =12, a slight increase in the measured total cyanide concentration was observed when thiosulfate was used to dechlorinate the samples, and a significant increase (>10 microg/L) was observed when arsenite was used as the dechlorinating agent. These results provide evidence that approved preservation protocols may give rise to cyanide formation in chlorinated wastewater effluent matrices.     

Evaluation of the use of diffusive air samplers for determining temporal and spatial variation of volatile organic compounds in the ambient air of urban communities

The Houston-Galveston metropolitan area has a relatively high density of point and mobile sources of air toxics, and determining and understanding the relationship between emissions and ambient air concentrations of air toxics is important for evaluating potential impacts on public health and formulating effective regulatory policies to control this impact, both in this region and elsewhere. However, conventional ambient air monitoring approaches are limited with regard to expense, siting limitations, and representative sampling necessary for adequate exposure assessment. The overall goal of this multiphase study is to evaluate the use of simple passive air samplers to determine temporal and spatial variability of the ambient air concentrations of selected volatile organic compounds (VOCs) in urban areas. Phase 1 of this study, reported here, was a field evaluation of 3M organic vapor monitors (OVMs) involving limited comparisons with commonly used active sampling methods, an assessment of sampler precision, a determination of optimal sampling duration, and an investigation of the utility of a simple modification of the commercial sampler. The results indicated that a sampling duration of 72 hr exhibited generally low bias relative to automated continuous gas chromatography measurements, good overall precision, and an acceptable number of measurements above detection limits. The modified sampler showed good correlation with the commercial sampler, with higher sampling rates, although lower than expected.     

Mercury deposition/accumulation rates in the vicinity of a lead smelter as recorded by a peat deposit

Mercury (Hg) concentration profiles and historical accumulation rates were determined in three ²¹⁰Pb-dated cores from a peat deposit in the vicinity of a lead (Pb) smelter at Příbram, Czech Republic. The Hg concentrations in peat samples ranged from 66 to 701 μg kg⁻¹. Cumulative Hg inventories from each core (for the past 150 yr) varied by a factor of 1.4 (13.6–18.5 mg Hg m⁻²), indicating variations of net Hg accumulation rate within the peat deposit. Historical changes in vegetation cover (leading to variable interception by trees) are probably responsible for this variation in space and time. The uncorrected Hg accumulation rates peaked between the 1960s and 1980s (up to 226 μg m⁻² yr⁻¹). Recent findings show that Hg records from peat tend to overestimate historical levels of Hg deposition. Therefore we used the mass loss compensation factor (MLCF) to normalize Hg accumulation rates. These corrected Hg accumulation rates were significantly lower (maximum 129 μg m⁻² yr⁻¹) and better corresponded to changes in historical smelter emissions, which were highest in the 1960s. The agreement between the corrected Hg accumulation rates in the uppermost peat sections (2–38 μg m⁻² yr⁻¹) and biomonitoring of atmospheric deposition by mosses in several recent years (4.7–34.4 μg m⁻² yr⁻¹) shows the usefulness of MLCF application on Hg accumulation in peat archives. However, the MLCF correction was unsuitable for Pb. The recent Pb deposition rates obtained by an independent biomonitoring study using mosses (0.5–127 mg m⁻² yr⁻¹) were better correlated with net Pb accumulation rates recorded in peat (7–145 mg m⁻² yr⁻¹) than with corrected rates obtained by the MLCF approach (1–28 mg m⁻² yr⁻¹).     

Evidence of enhanced atmospheric ammoniacal nitrogen in Hells Canyon national recreation area: implications for natural and cultural resources

Agriculture releases copious fertilizing pollutants to air sheds and waterways of the northwestern United States. To evaluate threats to natural resources and historic rock paintings in remote Hells Canyon, Oregon and Idaho, deposition of ammonia (NH3), nitrogen oxides (NOx), sulfur dioxide (SO2), and hydrogen sulfide (H2S) at five stations along 60 km of the Snake River valley floor were passively sampled from July 2002 through June 2003, and ozone data and particulate chemistry were obtained from the Interagency Monitoring of Protected Visual Environments (IMPROVE) station at Hells Canyon. NH3 concentrations were high; biweekly averages peaked at 5-19 ppb in spring and summer and the nutrient-laden Snake River is a likely source. Fine particulate ammonium nitrate (NH4NO3) averaged 2.6 microg/m3 during the 20% of worst visibility days with winter drainage of air masses from the Snake River Basin and possibly long distance transport from southern California. Other pollutants were within background ranges. NH3 is corrosive to clay-based pictographs; nitrogen deposition can alter natural biotic communities and terrestrial ecosystem processes at levels reported here.     

Sub-tropical urban environment affecting content and composition of non-structural carbohydrates of Lolium multiflorum ssp. italicum cv. Lema

This study analyzed the relationship between environmental factors, especially air pollution and climatic conditions, and non-structural carbohydrates (NSC) in plants of Lolium multiflorum exposed during 10 consecutive periods of 28 days at a polluted site (Congonhas) and at a reference site in São Paulo city (Brazil). After exposure, NSC composition and leaf concentrations of Al, Fe, Cu, Zn, Pb and Cd were measured. The seasonal pattern of NSC accumulation was quite similar in both sites, but plants at Congonhas showed higher concentrations of these compounds, especially fructans of low and medium degree of polymerization. Regression analysis showed that NSC in plants growing at the polluted site were explained by variations on temperature and leaf concentration of Fe (positive effect), as well as relative humidity and particulate material (negative effect). NSC in the standardized grass culture, in addition to heavy metal accumulation, may indicate stressing conditions in a sub-tropical polluted environment.     

Overview of deaths associated with natural events, United States, 1979-2004.

Analysis of the National Center for Health Statistics' Compressed Mortality File showed that between 1979 and 2004, natural events caused 21,491 deaths in the United States. During this 26-year period, there were 10,827 cold-related deaths and 5,279 heat-related deaths. Extreme cold or heat accounted for 75 per cent of the total number of deaths attributed to natural events--more than all of deaths resulting from lightning, storms and foods, and earth movements, such as earthquakes and landslides. Cold-related death rates were highest in the states of Alaska, Montana, New Mexico, and South Dakota, while heat-related deaths were highest in the states of Arizona, Missouri, and Arkansas. These deaths occurred more often among the elderly and black men. Other deaths were attributed to lightning (1,906), storms and foods (2,741), and earth movements (738). Most deaths associated with natural events are preventable and society can take action to decrease the morbidity and mortality connected with them.     

Arsenic removal using natural biomaterial-based sorbents

Arsenic contamination of water is a major problem worldwide. A possible solution can be approached through developing new sorbents based on cost-effective and environmentally friendly natural biomaterials. We have developed new sorbents based on biomaterial impregnation with iron oxyhydroxide. In this study, raw peat material, iron-modified peat, iron-modified biomass (shingles, straw, sands, cane and moss) as well as iron humate were used for the removal of arsenate from contaminated water. The highest sorption capacity was observed in iron-modified peat, and kinetic studies indicated that the amount of arsenic sorbed on this material exceeds 90 % in 5 h. Arsenate sorption on iron-modified peat is characterised by the pseudo-second-order mechanism. The results of arsenic sorption in the presence of competing substances indicated that sulphate, nitrate, chloride and tartrate anions have practically no influence on As(V) sorption onto Fe-modified peat, whereas the presence of phosphate ions and humic acid significantly lowers the arsenic removal efficiency.