Diphenylarsinic acid sorption mechanisms in soils using batch experiments and EXAFS spectroscopy

• DPAA sorption data was found to fit the Freundlich equation. • K_f was significantly positive correlated with oxalate-extractable Fe₂O₃. • Ligand exchange was the main mechanism for DPAA sorption on soils. • Bidentate binuclear and monodentate mononuclear DPAA bonds were identified. Diphenylarsinic acid (DPAA) is a phenyl arsenic compound derived from chemical warfare weapons. Macroscopic and microscopic work on DPAA sorption will provide useful information in predicting the partitioning and mobility of DPAA in the soil-water environment. Here, batch experiments and extended X-ray absorption fine structure (EXAFS) spectroscopy were used to investigate the sorption mechanisms of DPAA. The DPAA sorption data from 11 soil types was found to fit the Freundlich equation, and the sorption capacity, K_f, was significantly and positively correlated with oxalate-extractable Fe₂O₃. The K_f values of eight of the 11 untreated soils (1.51–113.04) significantly decreased upon removal of amorphous metal (hydr)oxides (0.51–13.37). When both amorphous and crystalline metal (hydr)oxides were removed from the untreated soils, the K_f values either decreased or slightly increased (0.65–3.09). Subsequent removal of soil organic matter from these amorphous and crystalline metal (hydr)oxide-depleted samples led to further decreases in K_f to 0.02–1.38, with only one exception (Sulfic Aquic-Orthic Halosols). These findings strongly suggest that ligand exchange reactions with amorphous metal (hydr)oxides contribute most to DPAA sorption on soils. EXAFS data provide further evidence that DPAA primarily formed bidentate binuclear (²C) and monodentate mononuclear (¹V) coring-sharing complexes with As-Fe distances of 3.34 and 3.66 Å, respectively, on Fe (hydr)oxides. Comparison of these results with earlier studies suggests that ²C and ¹V complexes of DPAA may be favored under low and high surface coverages, respectively, with the formation of ¹V bonds possibly conserving the sorption sites or decreasing the steric hindrance derived from phenyl substituents.     

活性炭对含铅废水吸附特性研究

采用静态法用活性炭吸附处理含铅废水,考察了活性炭对含铅废水的吸附特性。结果表明:活性炭对铅离子吸附平衡时间为100 m in;吸附等温方程为:Ce/qe=0.4298+0.0594Ce(25℃),该方程符合Langmu ir型吸附模式,不同温度下吸附平衡参数0RL1,表示该吸附为有利吸附。实验数据应用数学模型拟合,二级相关系数R2=0.9998,显示吸附过程动力学与二级动力学模型相关性较好;计算不同温度下各热力学参数:△Hθ大于零、△Gθ小于零,证实该吸附过程是一个自发吸热过程。△Sθ大于零,表明铅离子在固液界面有序性减小、混乱度增大。△Hθ值很小,说明该过程为物理吸附。     

脱硫石膏改良碱化土壤种植枸杞的效果研究

利用燃煤电厂脱硫石膏改良盐碱地对于废弃物资源化利用和发展循环经济具有重要意义。选择具有典型代表性的宁夏西大滩碱化土壤,采用两因素随机区组田间实验设计,进行脱硫石膏改良碱化土壤种植枸杞的效果实验研究。研究表明脱硫石膏施用量和施用深度不同,对于降低土壤碱化度、总碱度和pH值,改良土壤碱性的效果不同;脱硫石膏施用量不同,对于促进枸杞枝条和径杆的生长不同。施用量24 000 kg/hm2较48 000 kg/hm2提高枸杞枝条生长量10.5%～18.7%、径杆生长量10.5%～18.7%;脱硫石膏施用量24 000 kg/hm2,施用深度60 cm更有利于提高枸杞红果体积、红果鲜重和产量。脱硫石膏施用量24 000 kg/hm2,施用深度60 cm较未施脱硫石膏提高枸杞红果体积、红果鲜重和产量分别为28.3%、15.0%和37.9%。     

胞外聚合物对水中Cd(Ⅱ)的吸附性能研究

以Pseudomonas fluorescens C-2产生的胞外聚合物PF-2作为新型生物吸附剂,以傅里叶变换红外光谱(FTIR)对其进行表征。系统地研究了胞外聚合物PF-2对水中Cd(II)的吸附行为。结果表明,在pH值为6.0,该吸附剂对水中的Cd(II)具有很强的吸附能力。聚合物PF-2对Cd(Ⅱ)的吸附较易进行,吸附等温线能较好地用Langmuir模型来描述,最大单分子层吸附量为33.50 mg/g,吸附动力学很好地符合准二级动力学模型。胞外聚合物PF-2含有的主要官能团为羧基、羟基和氨基等,其中羧基、羟基参与了Cd(Ⅱ)的吸附。结果表明利用胞外聚合物PF-2去除环境水样中的Cd(Ⅱ)是可行的。     

AFB-SBR工艺处理蓝皮制革工业废水

采用厌氧流化床(AFB)-序批式反应器(SBR)工艺处理蓝皮制革工业废水。分别考察了水力停留时间(HRT)、容积负荷对厌氧流化床以及曝气时间、污泥浓度、溶解氧浓度对SBR反应器处理效果的影响。试验结果表明,AFB将实验废水的BOD_5/COD(B/C)值由0.19～0.26提高至0.35～0.42,有效提高了其可生化性;在进水COD浓度为1 700～1 890 mg/L、HRT为1 d、容积负荷为1.792 kg COD/(m~3·d)时,COD去除率达65.2%～68.5%,且具有良好的抗冲击负荷能力。SBR在进水COD浓度为628～712 mg/L、污泥浓度为2.9 g/L、曝气时间为10 h、溶解氧浓度为2 mg/L工况下,COD去除率达87.6%,NH_3-N去除率达93.6%,处理后出水水质符合污水综合排放标准(GB 8978-1996)中的一级标准要求。     

麻质活性炭的制备及其对Cu2＋的吸附研究

以废麻为原料,KOH为活化剂制备粉状活性炭,通过静态吸附实验研究了活性炭对Cu2＋的吸附性能,探讨了溶液起始pH值、活性炭投加量、吸附时间、起始Cu2＋质量浓度等对Cu2＋吸附效果的影响。结果表明,溶液pH和活性炭投加量对吸附效果有较大影响,活性炭对Cu2＋的吸附率在60 min内超过50%,初始浓度在10~50 mg/L时,活性炭对Cu2＋的吸附量与起始浓度近似成正比。采用Langmuir、Freundlich吸附等温式对吸附平衡数据进行了拟合,结果表明吸附等温线符合Frenudlich模型。采用傅立叶红外光谱法（FT-IR）分析了活性炭的表面官能团,分析表明活性炭表面酸性官能团可能是吸附Cu2＋的活性中心。     

“点滴渗透法”在政治理论课教学中的应用

改革开放以来,经济社会发展迅速,人们的思想意识和道德观念也在发生着巨大的变化。如何让社会主义核心价值体系深入到大学生的心灵深处,内化为他们的人格力量和人生动力,是开展思想道德教育需要认真研究的重大课题。而将政治理论课的教学过程与师生的行为实践结合起来,丰富课堂教学的内容和形式,延伸拓展课堂教学的空间,是在政治理论课教学中尝试实践"点滴渗透法"的主要内容。     

Intake fraction of nonreactive motor vehicle exhaust in Hong Kong

The intake fraction (iF) of nonreactive constituents of exhaust from mobile vehicles in the urban area of Hong Kong is investigated using available monitoring data for carbon monoxide (CO) as a tracer of opportunity. Correcting for regional transport of carbon monoxide into Hong Kong, the annual-average iF for nonreactive motor vehicle emissions within the city is estimated to be around 270 per million. This estimated iF is much higher than values previously reported for vehicle emissions in US urban areas, Helsinki and Beijing, and somewhat lower than those reported for a densely populated street canyon in downtown Manhattan, New York City, or for emissions into indoor environments. The reported differences in intake fractions in various cities mainly result from the differences in local population densities. Our analysis highlights the importance of accounting for the influence of upwind transport of pollutants when using ambient data to estimate iF for an urban area. For vehicle exhaust in Hong Kong, it is found that the in/near vehicle microenvironment contributes similarly to the indoor home environment when accounting for the overall iF for children and adults.     

水合肼改性淀粉去除废水中的重金属离子

以木薯淀粉为原料、硝酸铈铵为引发剂,合成丙烯酸甲酯接枝淀粉;用水合肼对其进行改性,合成了具有氨基功能团的改性淀粉。将改性淀粉用于对多种单一重金属离子和混合重金属离子的去除。在混合重金属离子溶液中,在室温、改性淀粉加入量为7.0g/L、重金属离子质量浓度为30mg/L、反应时间为120min的条件下,混合液pH为3～7时,改性淀粉对Cu2+、Pb2+、Cd2+和Ni2+的去除率均达99.9%以上;混合液pH为4时,改性淀粉对Cr6+的去除率达73.2%。     

废环氧树脂/PVC复合材料的性能

将废环氧树脂与聚氯乙烯(PVC)共混,采用模压工艺制备复合材料。通过正交实验,讨论废环氧树脂添加量、硅烷偶联剂KH-550用量、模压时间3个因素对复合材料力学性能的影响大小,得到其优化条件。在正交实验所得优化条件基础之上,研究单因素对复合材料的影响,最终确定实验的最优方案。结果表明:当模压时间10 min,废环氧树脂添加量70%,硅烷偶联剂用量2份时,复合材料的力学性能达到最优,冲击强度为10.49 kJ/m2,拉伸强度为62.24 MPa。