The main anammox-based processes,the involved microbes and the novel process concept from the application perspective

• The PNA, denitratation/anammox, and DAMO/anammox process are reviewed together. • Denitratation/anammox-based process is promising in mainstream treatment. • DAMO and denitratation processes realize the higher nitrogen removal efficiency. • The utilization of metabolism diversity of functional microbe is worth exploring. • An effective waste treatment system concept is proposed. Anammox technology has been widely researched over the past 40-year from the laboratory-scale to full-scale. It is well-known that in actual applications, the solo application of anammox is not feasible. Since both ammonium and nitrite are prerequisites based on the reaction mechanism, the pre-treatment of wastewater is necessary. With the combination of anammox process and other pre-treatment processes to treat the actual wastewater, many types of anammox-based processes have been developed with distinct nitrogen removal performance. Thus, in order to heighten the awareness of researchers to the developments and accelerate the application of these processes to the treatment of actual wastewater, the main anammox-based processes are reviewed in this paper. It includes the partial nitritation/anammox process, the denitratation/anammox (PD/A) process, the denitrifying anaerobic methane oxidation/anammox (DAMO/A) process, and more complex deuterogenic processes. These processes have made the breakthroughs in the application of the anammox technology, such as the combination of nitrification and PD/A process can achieve stability and reliability of nitrogen removal in the treatment of mainstream wastewater, the PD/A process and the DAMO/A have brought about further improvements in the total nitrogen removal efficiency of wastewater. The diversity of functional microbe characteristics under the specific condition indicate the wide application potential of anammox-based processes, and further exploration is necessary. A whole waste treatment system concept is proposed through the effective allocation of above mentioned processes, with the maximum recovery of energy and resources, and minimal environmental impact.     

Impact and trade off analysis of land use change on spatial pattern of ecosystem services in Chishui River Basin

Environmental Science and Pollution Research - The motivation of this fundamental research is to reveal the response of ecosystem services to land use change and to support the sustainable...     

Do BRI policy and institutional quality influence economic growth and environmental quality? An empirical analysis from South Asian countries affiliated with the Belt and Road Initiative

Environmental Science and Pollution Research - The effect of quality institutions on growth-environmental nexus is a generally ignored topic, especially in South Asia economies affiliated with the...     

Migration,Transformation and Removal of Macrolide Antibiotics in The Environment: A Review

Environmental Science and Pollution Research - Macrolide antibiotics (MAs), as a typical emerging pollutant, are widely detected in environmental media. When entering the environment, MAs can...     

Settleability and dewaterability of sewage sludge with modified diatomite

Environmental Science and Pollution Research - In this study, cationic polyacrylamide (CPAM)-modified diatomite and cetyl trimethyl ammonium bromide (CTAB)-modified...     

Phenanthrene adsorption by soils treated with humic substances under different pH and temperature conditions

The mobility of phenanthrene (PHE) in soils depends on its sorption and is influenced by either the existing soil humus or exogenous humic substances. Exogenous humic acids (HAs) were added to soil to enhance the amount of soil organic carbon (SOC) by 2.5, 5.0, and 10.0 g kg⁻¹. PHE desorption of the treated soils was determined at two pH levels (3.0 and 6.0) and temperatures (15 and 25 °C). Soil PHE adsorption was related to pH and the type and quantity of added HAs. Humic acid (HA) and fulvic acid (FA) derived from peat had different effects on adsorption of PHE. Adsorption increased at first and then decreased with increasing quantity of exogenous FA. When the soil solution pH (in 0.005 M CaCl₂) was 4.5 or 3.0, the turning points were 2.5 g FA kg⁻¹ at pH 3.0 and 5 g FA kg⁻¹ at pH 4.5. When soil solution pH was 6, the amount of adsorbed PHE was enhanced with increasing exogenous HAs (HA or FA) and amount of adsorption by soil treated with FA was higher than with HA. Adsorption of PHE in the FA treatment at 10.0 g kg⁻¹ was lower than the controls (untreated soil or treatment with HAs at 0 g kg⁻¹) when the soil solution pH was 3.0. This suggests that FA adsorbed by soil was desorbed at low pH and would then increase PHE solubility, and PHE then combined with FA. PHE adsorption was usually higher under lower pH and/or lower temperature conditions. PHE sorption fitted the Freundlich isotherm, indicating that exogenous humic substances influenced adsorption of phenanthrene, which in turn was affected by environmental conditions such as pH and temperature. Thus, exogenous humic substances can be used to control the mobility of soil PAHs under appropriate conditions to decrease PAH contamination.     

Biosorption of lead ion by chemically-modified biomass of marine brown algae Laminaria japonica

In this paper, marine brown algae Laminaria japonica was chemically-modified by crosslinking with epichlorohydrin (EC(1), EC(2)), or oxidizing by potassium permanganate (PC), or only washed by distilled water (DW). They were used for equilibrium sorption uptake studies with lead. As can be seen from the experimental results that biosorption equilibriums were rapidly established in about 2h. The lead adsorption was strictly pH dependent, and maximum removal of lead on biosorbents were observed at pH 5.3. The effects solid/liquid ratio on lead biosorption was also investigated. The maximum lead uptakes were 1.67 mmol g(-1), 1.62 mmol g(-1), 1.54 mmol g(-1) and 1.21 mmol g(-1), respectively for EC(1), EC(2), PC and DW. The order of maximum lead uptakes for different pretreated and raw alga was EC(1)>EC(2)>PC>DW. A comparison of different isotherm models revealed that the combination of Langmuir and Freundlich (L-F) isotherm model fitted the experimental data best.     

2-chlorophenol induced ROS generation in fish Carassius auratus based on the EPR method

In the present study, a secondary spin trapping technique was used followed by electron paramagnetic resonance (EPR) analysis, to study the potential of reactive oxygen species (ROS) production after fish (Carassius auratus) were injected i.p. with different doses (50, 100, 200, 250, 500mgkg(-1)) of 2-chlorophenol (2-CP). The ROS signal intensity of the EPR spectrum showed a significant increase (p<0.05, compared with the control) when the 2-CP dose was as low as 50mgkg(-1). There is a good relationship between the 2-CP administered doses and ROS generation. Based on the hyperfine splitting constants and shape of the EPR spectrum, the ROS which was generated in fish liver after intraperitoneal (i.p.) injection of 2-CP was identified as ()OH. SOD and CAT activities were found to be induced at lower doses of 2-CP. GSH levels fell below the control level following all treatments with 2-CP, and GSSG levels changed along with those of GSH. These observations indicated that the fish experienced oxidative stress. The strong positive correlation (r=0.966, p<0.005) between ()OH radical and lipid peroxidation suggested that lipid peroxidation was possibly induced by ()OH. The phase II detoxification enzyme glutathione-S-transferase (GST) may play an important role in 2-CP metabolism or excretion and, consequently, reduce ROS production. This study provides strong evidence that level of ROS is significantly increased in 2-CP stressed fish, and ROS may serve as a potential biomarker to indicate 2-CP contamination.     

A parametric transfer function methodology for analyzing reactive transport in nonuniform flow

We analyze reactive transport during in-situ bioremediation in a nonuniform flow field, involving multiple extraction and injection wells, by the method of transfer functions. Gamma distributions are used as parametric models of the transfer functions. Apparent parameters of classical transport models may be estimated from those of the gamma distributions by matching temporal moments. We demonstrate the method by application to measured data taken at a field experiment on bioremediation conducted in a multiple-well system in Oak Ridge, TN. Breakthrough curves (BTCs) of a conservative tracer (bromide) and a reactive compound (ethanol) are measured at multi-level sampling (MLS) wells and in extraction wells. The BTCs of both compounds are jointly analyzed to estimate the first-order degradation rate of ethanol. To quantify the tracer loss, we compare the approaches of using a scaling factor and a first-order decay term. Results show that by including a scaling factor both gamma distributions and inverse-Gaussian distributions (transfer functions according to the advection-dispersion equation) are suitable to approximate the transfer functions and estimate the reactive rate coefficients for both MLS and extraction wells. However, using a first-order decay term for tracer loss fails to describe the BTCs at the extraction well, which is affected by the nonuniform distribution of travel paths.