The ecological and economic potential of carbon sequestration in forests: examples from South America

Costs of reforestation projects determine their competitiveness with alternative measures to mitigate rising atmospheric CO2 concentrations. We quantify carbon sequestration in above-ground biomass and soils of plantation forests and secondary forests in two countries in South America-Ecuador and Argentina-and calculate costs of temporary carbon sequestration. Costs per temporary certified emission reduction unit vary between 0.1 and 2.7 USD Mg(-1) CO2 and mainly depend on opportunity costs, site suitability, discount rates, and certification costs. In Ecuador, secondary forests are a feasible and cost-efficient alternative, whereas in Argentina reforestation on highly suitable land is relatively cheap. Our results can be used to design cost-effective sink projects and to negotiate fair carbon prices for landowners.     

Degradation of chlorobenzenes by a strain of Acidovorax avenae isolated from a polluted aquifer

A subsurface microbial community was isolated from a polluted site of Suquía River (Córdoba-Argentina), acclimated during 15 days in aerobic conditions using 1,2-dichlorobenzene (1,2-DCB) as the sole carbon source. From this acclimated community, we isolated and identified by 16S rDNA analysis a strain of Acidovorax avenae, which was able to perform the complete biodegradation of 1,2-DCB in two days affording stoichiometric amounts of chloride. This pure strain was also tested for biodegradation of chlorobenzene (CB); 1,3-DCB and 1,4-DCB, giving similar results to the experiments using 1,2-DCB. The aromatic-ring-hydroxylating dioxygenase (ARHDO) alpha-subunit gene core, encoding the catalytic site of the large subunit of chlorobenzene dioxygenase, was detected by PCR amplification and confirmed by DNA sequencing. These results suggest that the isolated strain of A. avenae could use a catabolic pathway, via ARHDO system, leading to the formation of chlorocatecols during the first steps of biodegradation, with further chloride release and subsequent paths that showed complete substrate consumption.     

Impact assessment of climate policy on Poland's power sector

This article addresses the impact of the European Union Emissions Trading System (EU ETS) on Poland’s conventional energy sector in 2008–2020 and further till 2050. Poland is a country with over 80% dependence on coal in the power sector being under political pressure of the European Union’s (EU) ambitious climate policy. The impact of the increase of the European Emission Allowance (EUA) price on fossil fuel power sector has been modelled for different scenarios. The innovation of this article consists in proposing a methodology of estimation actual costs and benefits of power stations in a country with a heavily coal-dependent power sector in the process of transition to a low-carbon economy. Strong political and economic interdependence of coal and power sector has been demonstrated as well as the impact caused by the EU ETS participation in different technology groups of power plants. It has been shown that gas-fuelled combined heat and power units are less vulnerable to the EU ETS-related costs, whereas the hard coal-fired plants may lose their profitability soon after 2020. Lignite power plants, despite their high emissivity, may longer remain in operation owing to low operational costs. Additionally, the results of long-term, up to 2050, modelling of Poland’s energy sector supported an unavoidable need of deep decarbonisation of the power sector to meet the post-Paris climate objectives. It has been concluded that investing in coal-based power capacity may lead to a carbon lock-in of the power sector. Finally, the overall costs of such a transformation have been discussed and confronted with the financial support offered by the EU. The whole consideration has been made in a wide context of changes ongoing globally in energy markets and compared with some other countries seeking transformation paths from coal. Poland’s case can serve as a lesson for all countries trying to reduce coal dependence in power generation. Reforms in the energy sector shall from the very beginning be an essential part of a sustainable transition of the whole nation’s economy. They must scale the power capacity to the future demand avoiding stranded costs. The reforms must be wide-ranging, based on a wide political consensus and not biased against the coal sector. Future energy mix and corresponding technologies shall be carefully designed, matched and should remain stable in the long-term perspective. Coal-based power capacity being near the end of its lifetime provides an economically viable option to commence a fuel switch and the following technology replacement. Real benefits and costs of the energy transition shall be fairly allocated to all stakeholders and communicated to the society. The social costs and implications in coal-dependent regions may be high, especially in the short-term perspective, but then the transformation will bring profits to the whole society.     

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

Origin,distribution, and perspective health benefits of particulate matter in the air of underground salt mine: a case study from Bochnia,Poland

Environmental Geochemistry and Health - The composition and distribution of airborne particles in different locations in a salt mine were determined in terms of their origin, the distance from the...     

Employment of passive sampling in monitoring indoor air quality in selected residences in a Tri-city area in Poland

Time-weighted average concentrations of selected volatile compounds were measured in chosen residences in a Tri-City area of Poland by means of passive sampling. The results were compared to those obtained by dynamic technique – sorption tubes filled with Tenax TA sorbent. Results obtained by employing the two techniques were similar. Total volatile organic compound (TVOC) parameters were also determined. An attempt was also made to evaluate the influence of outdoor air pollutants on indoor air quality.     

Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.     

Future ocean acidification will be amplified by hypoxia in coastal habitats

Ocean acidification is elicited by anthropogenic carbon dioxide emissions and resulting oceanic uptake of excess CO₂ and might constitute an abiotic stressor powerful enough to alter marine ecosystem structures. For surface waters in gas-exchange equilibrium with the atmosphere, models suggest increases in CO₂ partial pressure (pCO₂) from current values of ca. 390 μatm to ca. 700–1,000 μatm by the end of the century. However, in typically unequilibrated coastal hypoxic regions, much higher pCO₂ values can be expected, as heterotrophic degradation of organic material is necessarily related to the production of CO₂ (i.e., dissolved inorganic carbon). Here, we provide data and estimates that, even under current conditions, maximum pCO₂ values of 1,700–3,200 μatm can easily be reached when all oxygen is consumed at salinities between 35 and 20, respectively. Due to the nonlinear nature of the carbonate system, the approximate doubling of seawater pCO₂ in surface waters due to ocean acidification will most strongly affect coastal hypoxic zones as pCO₂ during hypoxia will increase proportionally: we calculate maximum pCO₂ values of ca. 4,500 μatm at a salinity of 20 (T = 10 °C) and ca. 3,400 μatm at a salinity of 35 (T = 10 °C) when all oxygen is consumed. Upwelling processes can bring these CO₂-enriched waters in contact with shallow water ecosystems and may then affect species performance there as well. We conclude that (1) combined stressor experiments (pCO₂ and pO₂) are largely missing at the moment and that (2) coastal ocean acidification experimental designs need to be closely adjusted to carbonate system variability within the specific habitat. In general, the worldwide spread of coastal hypoxic zones also simultaneously is a spread of CO₂-enriched zones. The magnitude of expected changes in pCO₂ in these regions indicates that coastal systems may be more endangered by future global climate change than previously thought.