How to bend down the environmental Kuznets curve: the significance of biomass energy

Sources of renewable energy have received wide attention in the literature because of serious threats to the environment. However, some renewable resources, including biomass energy role is debatable in the energy economics literature. This empirical work focuses to analyze the role of biomass energy in carbon dioxide (CO₂) emissions using the framework of the environmental Kuznets curve (EKC) in Pakistan over the period from 1980 to 2015. The bound testing approach suggests there is cointegration among study variables. The study uses an auto-regressive distributed lag model (ARDL) with a structural break in the series. To summarize the findings of the study, it can be inferred that biomass energy increase CO₂ emissions. In addition, biomass energy helps to form a U-shaped relationship between income and CO₂ emissions that support the EKC hypothesis. Also, the feedback hypothesis is found between biomass energy and CO₂ emissions. The findings would guide policymaker with practical guidelines to formulate policies to utilize a high amount of biomass energy in a sustainable manner.

     

Effect of Oxidized Starch on Morphology,Rheological and Tensile Properties of Low-Density Polyethylene/Linear Low-Density Polyethylene/Thermoplastic Oxidized Starch Blends

In this work, morphology, rheological and tensile properties of low-density polyethylene/linear low-density polyethylene/thermoplastic oxidized starch (LDPE/LLDPE/TPOS) blends are studied. The blends of LDPE/LLDPE (70/30, w/w) containing 0–20 wt% TPOS in the presence of 3 wt% of PE-grafted maleic anhydride (PE-g-MA) as a compatibilizer are prepared by a twin screw extruder and then converted to appropriate thin films using an extrusion film blowing machine. Scanning electron microscopic images show that there is a relative good dispersion of oxidized starch particles in PE matrices. However, as TPOS content in the blends increases, the starch particle size increases too. The rheological analyses indicate that TPOS can decrease the elasticity and viscosity of the blends. The LDPE/LLDPE/TPOS blends show power-law behavior and as the TPOS content increases the power-law exponent (n) and consistency index (K) decrease. The ultimate tensile strength and elongation at break of the final blend films reduce, when TPOS content increases from 5 to 20 wt%. However, the required mechanical properties for packaging applications are achieved when 10 wt% oxidized starch is added, according to ASTM D4635.     

Fabrication and Characterization of Polyaniline Based Nano-Composite with Their Physico-Chemical and Environmental Applications

A series of organic–inorganic conducting nano polymer-matrix composite cation-exchanger have been synthesized via sol–gel method and characterized through FTIR, XRD, TGA-DTA, SEM, and TEM studies. The structural studies confirm the semi-crystalline nature of the material but the morphology of the exchanger gets changed after incorporation of inorganic moiety. The particle size of the nano-composite was found to be 19.2 nm. The observed band gap for the different samples was found to be in the range of 3.70–4.61 eV which shows that nano-composite material covers semiconducting range but the resistivity of samples is highly dependent on the percentage of inorganic part in the composite. Further the oxidative degradation of the polymer backbone begins after the removal of trapped water successively followed by dopant and low molecular weight oligomers. During the antimicrobial screening, the nano-composite was found to be active against different strains of bacteria and fungi. Gel electrophoresis and molecular docking studies were carried out to check the interaction and mechanism of inhibition of microbial growth, respectively by studying the effect of the nano-composite with DNA-Topoisomerase-1.     

Medium-scale gasification of oil palm empty fruit bunch for power generation

Journal of Material Cycles and Waste Management - This paper focuses on the performance of oil palm empty fruit bunch (EFB) gasification using a medium-scale downdraft gasifier for power...     

DDT residue in soil and water in and around abandoned DDT manufacturing factory

Dichlorodiphenyltrichloroethane (DDT) belongs to one of the most hazardous groups of chemicals called persistent organic pollutants. Many organochlorine pesticides including p,p(')-DDT are long lasting due to their non-degradability can travel to distant places and being fat soluble can accumulate in animals and human bodies. Due to the persistent nature of p,p(')-DDT, its adverse environmental and health impacts, the present study was undertaken to examine the residual p,p(')-DDT in and around abandoned p,p(')-DDT manufacturing factory in Amman Gharh, Nowshera, NWFP. Samples of soil, sediments and water were collected in and around the factory area, nearby p,p(')-DDT stores, main factory drain leading to river Kabul and nearby villages. Standard procedures were used for the collection, transportation and storage of samples for analyses. Extraction of each sample for p,p(')-DDT analyses was carried out in triplicates using Soxhelt extraction. p,p(')-DDT contents in the samples were analyzed by capillary GC with electron capture detector. Most of the samples collected up to half kilometer distance from the site of the DDT factory were found contaminated. Further the level of p,p(')-DDT decreased with increasing depth from top to bottom and with distance from the site. The results indicate that there is no immediate threat to underground water reservoirs.     

Simulation of boundary layer trajectory dispersion sensitivity to soil moisture conditions: MM5 and Noah-based investigation

In this study, the sensitivity of trajectory paths to anomalous soil moisture was analyzed during three different synoptic episodes in June 2006. The MM5 and Noah land surface models were used to simulate the response of the planetary boundary layer. The HYSPLIT model was used for trajectory analysis. It was found that the response in horizontal lower-level wind field was larger at regions where vertical wind velocity changes were also large. In addition, the sensitivity to soil moisture changes was significant and localized where convective activity was well developed and synoptic effects did not dominate. A non-local effect was felt over the rest of the domain where convection was not present since the model atmosphere reacted as a whole to compensate for induced changes in vertical velocity. This finding was supported by the fact that domain averaged vertical velocities changes were of the order of 0.2 cm s^?1 or less at about 650 hPa and about 200 times smaller than modeled local vertical velocity changes. The largest change in horizontal wind field near the surface was found for weak synoptic events on June 11–12 and June 22–23 while the stronger synoptic event of June 17–18 showed smaller differences. These changes in wind field conditions impacted the transport and dispersion of pollutants. To quantify the sensitivity of air quality estimates to soil moisture uncertainty, we have used three well known measures of trajectory differences: the absolute horizontal transport deviation (AHTD), the relative horizontal transport deviation (RHTD) and the absolute vertical transport deviation (AVTD) for an ensemble of 98 trajectories departing from a region well within the computational domain. For the June 11–12 event it was found that for wet and dry soil moisture experiments, AHTD, RHTD, and AVGTD can reach values in the range 60–100 km, 10–20% and 500–900 m at 24 h run time, respectively. For the June 17–18 and June 22–23 events these values of trajectory differences were reduced more than half. These differences in behavior between time periods are largely attributed to the combined effects of synoptic forcing and the sensitivity of planetary boundary layer to soil moisture changes during well developed convection. The implication for air quality studies is that the soil moisture anomaly and related uncertainty in planetary boundary layer response needs to be incorporated in order to construct an ensemble of the most probable scenarios in which pollutants are released and transported throughout a given target region.     

Effect of oxygenated liquid additives on the urea based SNCR process

An experimental investigation was performed to study the effect of oxygenated liquid additives, H₂O₂, C₂H₅OH, C₂H₄(OH)₂ and C₃H₅(OH)₃ on NO_x removal from flue gases by the selective non-catalytic reduction (SNCR) process using urea as a reducing agent. Experiments were performed with a 150 kW pilot scale reactor in which a simulated flue gas was generated by the combustion of methane operating with 6% excess oxygen in flue gases. The desired levels of initial NO_x (500 ppm) were achieved by doping the fuel gas with ammonia. Experiments were performed throughout the temperature range of interest, i.e. from 800 to 1200 °C for the investigation of the effects of the process additives on the performance of aqueous urea DeNO_x. With H₂O₂ addition a downward shift of 150 °C in the peak reduction temperature from 1130 to 980 °C was observed during the experimentation, however, the peak reduction efficiency was reduced from 81 to 63% when no additive was used. The gradual addition of C₂H₅OH up to a molar ratio of 2.0 further impairs the peak NO_x reduction efficiency by reducing it to 50% but this is accompanied by a downward shift of 180 °C in the peak reduction temperature. Further exploration using C₂H₄(OH)₂ suggested that a 50% reduction could be attained for all the temperatures higher than 940 °C. The use of C₃H₅(OH)₃ as a secondary additive has a significant effect on the peak reduction efficiency that decreased to 40% the reductions were achievable at a much lower temperature of 800 °C showing a downward shift of 330 °C.     

Biosorption potential and kinetic studies of vegetable waste mixture for the removal of Nickel(II)

Biosorption potential of new low cost biosorbent prepared from vegetable waste, composed of 1:1 mixture of potato and carrot peels for the removal of Ni(II) from aqueous solution was determined. The residual metallic ion concentrations were determined using an atomic absorption spectrophotometric technique (AAS). Batch experiments were conducted to optimize parameters such as initial pH, temperature, contact time, initial metal ion concentration and biosorbent dose and the results showed that maximum adsorption of Nickel (79.32 %) occurs when the contents were stirred for 75 min with 3.0 g of biosorbent at 35 °C and pH 4. Kinetic studies of the reaction revealed that it follows a pseudo-second order reaction. The experimental results were analyzed in terms of Langmuir and Freundlich isotherms. The Langmuir isotherm model fits well to data of Ni(II) biosorption by the prepared biomass as compared to the model of Freundlich. Both neat and Ni loaded biosorbent samples were analyzed by AAS using a dry ashing process in a furnace and also by use of a FT-IR spectrophotometer and an X-Ray florescence spectrometer in order to confirm the biosorption of Ni(II) and the results have revealed that a significant amount of Ni is present in the spent biosorbent.     

Chemical characterization and source apportionment of fine and coarse particulate matter in Lahore,Pakistan

Lahore, Pakistan is an emerging megacity that is heavily polluted with high levels of particle air pollution. In this study, respirable particulate matter (PM_2.5 and PM₁₀) were collected every sixth day in Lahore from 12 January 2007 to 19 January 2008. Ambient aerosol was characterized using well-established chemical methods for mass, organic carbon (OC), elemental carbon (EC), ionic species (sulfate, nitrate, chloride, ammonium, sodium, calcium, and potassium), and organic species. The annual average concentration (±one standard deviation) of PM_2.5 was 194 ± 94 μg m^?3 and PM₁₀ was 336 ± 135 μg m^?3. Coarse aerosol (PM_10?2.5) was dominated by crustal sources like dust (74 ± 16%, annual average ± one standard deviation), whereas fine particles were dominated by carbonaceous aerosol (organic matter and elemental carbon, 61 ± 17%). Organic tracer species were used to identify sources of PM_2.5 OC and chemical mass balance (CMB) modeling was used to estimate relative source contributions. On an annual basis, non-catalyzed motor vehicles accounted for more than half of primary OC (53 ± 19%). Lesser sources included biomass burning (10 ± 5%) and the combined source of diesel engines and residual fuel oil combustion (6 ± 2%). Secondary organic aerosol (SOA) was an important contributor to ambient OC, particularly during the winter when secondary processing of aerosol species during fog episodes was expected. Coal combustion alone contributed a small percentage of organic aerosol (1.9 ± 0.3%), but showed strong linear correlation with unidentified sources of OC that contributed more significantly (27 ± 16%). Brick kilns, where coal and other low quality fuels are burned together, are suggested as the most probable origins of unapportioned OC. The chemical profiling of emissions from brick kilns and other sources unique to Lahore would contribute to a better understanding of OC sources in this megacity.     

The role of bacteria in the heavy metals removal and growth of Sedum alfredii Hance in an aqueous medium

This study was the first attempt to examine the possible role of the naturally occurring rhizospheric bacteria in heavy metal removal by Sedum alfredii Hance, a terrestrial Zn/Cd hyperaccumuluator, from Zn, Cd, Cu and Pb contaminated water using antibiotic ampicillin. Moreover, the toxicity symptom in plants under heavy metal stress expressed as total chlorophyll, chlorophyll a and b content, growth inhibition, root length, and N, P contents were studied, and the possible relationship among them were also discussed. These results indicate that rhizospheric bacteria may play an important role in the uptake of N and P by S. alfredii, and consequently result in the increase of Chlorophyll content in the leaves and plant biomass due to improved photosynthesis. At the same time, root length significantly decreased under the treatment with ampicillin, which suggested that rhizospheric bacteria appeared to protect the roots against heavy metal toxicity. The Pb, Zn, Cu and Cd concentrations in the roots, stems and leaves of S. alfredii were much higher than those exposed to ampicillin. Accordingly, metal concentrations in the contaminated water without ampicillin treatment were lower than those treated with ampicillin. These results suggest that the rhizospheric bacteria may be useful in plant tolerance to heavy metal toxicity, and also accelerate the metal removal from contaminated water.