Petrogenetic characteristics of molten slag from the pyrolysis/melting treatment of MSW

MSW slag materials derived from four pyrolysis melting plants in Japan were studied from the viewpoint of petrology in order to discriminate the glass and mineral phases and to propose a petrogenetic model for the formation process of molten slag. Slag material is composed of two major components: melt and refractory products. The melt products that formed during the melting process comprise silicate glass, and a suite of minerals as major constituents. The silicate glass is essentially composed of low and high silica glass members (typically 30% and 50% of SiO(2), respectively), from which minerals such as spinels, melilite, pseudowollastonite, and metallic inclusions have been precipitated. The refractory products consist mainly of pieces of metals, minerals and lithic fragments that survived through the melting process. Investigations demonstrated that the low silica melts (higher Ca and Al contents) were produced at upper levels of high temperature combustion chamber HTCC, at narrower temperature ranges (1250-1350 degrees C), while the high silica melts formed at broader temperature ranges (1250-1450 degrees C), at the lower levels of HTCC. The recent temperature ranges were estimated by using CaOAl(2)O(3)SiO(2) (CAS) ternary liquidus diagram that are reasonably consistent with those reported for a typical combustor. It was also understood that the samples with a higher CaO/SiO(2) ratio (>0.74-0.75) have undergone improved melting, incipient crystallization of minerals, and extensive homogenization. The combined mineralogical and geochemical examinations provided evidence to accept the concept of stepwise generation of different melt phases within the HTCC. The petrogenesis of the melt products may therefore be described as a two-phase melt system with immiscible characteristics that have been successively generated during the melting process of MSW.     

Equilibrium sampling used to monitor malodors in a Swine waste lagoon

The concentrations of malodorous compounds in a 0.4-ha anaerobic lagoon that received waste from approximately 2000 sows were monitored during the late summer to late fall of 2006 to gain insight into the factors influencing their concentrations. Selected malodorous compounds were measured by the use of equilibrium samplers consisting of submersible stir plates and stir bar sorbtive sampling with polydimethylsiloxane-coated magnetic stir bars. During the same period, air and water temperatures, suspended solids, total organic carbon and nitrogen content, and wastewater pH were recorded. Concentrations of malodorous compounds were higher at the surface of the lagoon than at the middle or bottom of the lagoon. Skatole concentration, for instance, averaged 54, 24, and 38 microg L(-1) near the surface, in the middle, and at the lowest sampling depths, respectively. While the lagoon was being pumped down during field application of wastewater, concentrations of malodorous compounds fluctuated widely, increased 16-fold as compared with the sampling period before pumping, and continued to increase as fall progressed and temperatures cooled. Suspended solids, volatile suspended solids, and total organic carbon increased near the bottom of the lagoon during this same period. The increases in the concentrations of malodorous compounds in the wastewater during the fall could have been due to a combination of several factors. These factors include reduced degradation by lagoon bacteria, less wind stripping of volatile compounds from the lagoon surface due to lowering of the lagoon surface after crop application, and/or reduced evaporation of malodorous compounds due to falling temperatures.     

Foliar application of aspartic acid lowers cadmium uptake and Cd-induced oxidative stress in rice under Cd stress

Environmental Science and Pollution Research - Cadmium (Cd) contamination of farmland soils is a widespread problem around the globe, and rice (Oryza sativa L.) tends to accumulate more Cd and is...     

Trade,FDI, and CO2 emissions nexus in Latin America: the spatial analysis in testing the pollution haven and the EKC hypotheses

Environmental Science and Pollution Research - Americas have a mix of developing and developed economies. Thus, the pollution haven hypothesis (PHH) is expected in the developing countries of Latin...     

Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

This article focused on the performance of oil palm kernel shell (PKS) gasification using a medium-scale downdraft gasifier with a feedstock capacity of 500 kg at a temperature range of 399–700°C and at a feed rate of 177 kg/h. This article is important for evaluating the reliability of PKS gasification for commercial power generation activities from biomass. The process performance was evaluated based on the syngas calorific value (CV), syngas flow rate, and its cold gas efficiency (CGE). The syngas flow rates and CVs were measured using a gas flow meter and a gas analyzer in real time. The data obtained were then analyzed to evaluate the performance of the process. The results showed that the CGE of the process was moderately high (51%) at 681°C, with a high syngas CV (4.45–4.89 MJ/Nm³) which was ideal for gas engine applications. The PKS gasification performance increased when the reactor temperature increased. Projections were made for the CGE and the syngas CV for the PKS gasification with increased reactor temperatures and it was found that these values could be increased up to 80% and 5.2 MJ/Nm^3, respectively at a reactor temperature of 900°C. In addition, the estimated power that could be generated was about 600 kW_e at a maximum operation of 500 kg/h of feed rate. Based on the analysis, a medium-scale PKS gasification is observed to be a promising process for power generation from biomass due to the favorable performance of the process.     

Perspectives of using fungi as bioresource for bioremediation of pesticides in the environment: a critical review

Pesticides are used for controlling the development of various pests in agricultural crops worldwide. Despite their agricultural benefits, pesticides are often considered a serious threat to the environment because of their persistent nature and the anomalies they create. Hence removal of such pesticides from the environment is a topic of interest for the researchers nowadays. During the recent years, use of biological resources to degrade or remove pesticides has emerged as a powerful tool for their in situ degradation and remediation. Fungi are among such bioresources that have been widely characterized and applied for biodegradation and bioremediation of pesticides. This review article presents the perspectives of using fungi for biodegradation and bioremediation of pesticides in liquid and soil media. This review clearly indicates that fungal isolates are an effective bioresource to degrade different pesticides including lindane, methamidophos, endosulfan, chlorpyrifos, atrazine, cypermethrin, dieldrin, methyl parathion, heptachlor, etc. However, rate of fungal degradation of pesticides depends on soil moisture content, nutrient availability, pH, temperature, oxygen level, etc. Fungal strains were found to harbor different processes including hydroxylation, demethylation, dechlorination, dioxygenation, esterification, dehydrochlorination, oxidation, etc during the biodegradation of different pesticides having varying functional groups. Moreover, the biodegradation of different pesticides was found to be mediated by involvement of different enzymes including laccase, hydrolase, peroxidase, esterase, dehydrogenase, manganese peroxidase, lignin peroxidase, etc. The recent advances in understanding the fungal biodegradation of pesticides focusing on the processes, pathways, genes/enzymes and factors affecting the biodegradation have also been presented in this review article.     

Visible light photocatalytic water disinfection and its kinetics using Ag-doped titania nanoparticles

The UN estimated about five million deaths every year due to water-borne diseases, accounting from four billion patients. Keeping in view, the ever increasing health issues and to undermine this statistics, a reliable and sustainable water-treatment method has been developed using visible light for water treatment. titania nanoparticles (NPs) have been synthesized successfully by a more applicable method Viz: liquid impregnation (LI) method. The bacterial death rate by photocatalysis under visible light was studied by employing a typical fluorescent source and was found to follow pseudo first-order reaction kinetics. The nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy, and energy-dispersive X-ray spectroscopy to deduce their size range, surface morphology, and elemental compositions, respectively. Among all the prepared grades, 1 % Ag–TiO₂ was found to be a very effective photocatalytic agent against Escherichia coli. The resulted photoinactivated data were also evaluated by different empirical kinetic models for bacterial inactivation. Hom, Hom-power, Rational, and Selleck models were not able to explain the disinfection kinetics but modified-Hom model fitted best with the experimentally obtained data by producing a shoulder, log-linear, and a tail region.     

Effect of Zn toxicity on root morphology,ultrastructure, and the ability to accumulate Zn in Moso bamboo (Phyllostachys pubescens)

The effects of zinc (Zn) on seed germination and growth of Moso bamboo (Phyllostachys pubescens) were investigated. Under zinc stress, the seed germination rate did not show significant difference from that of the control. Hydroponics experiments indicated that Moso bamboo had a strong ability to accumulate Zn in the shoot and it reached its maximum value in the shoot at 100 μM Zn. The root Zn concentration ranged from 2,329.29 to 8,642.51 mg kg^?1, with the root Zn concentration at 10 μM Zn being 58.23 times that of the control. The root morphology parameters slightly increased at the lower Zn treatments, while growth restriction was evident at higher Zn treatments. Root ultrastructural studies revealed that the cell structure, root tips, and organelles were significantly changed under Zn stress as compared to those of the control. Some abnormalities were evident in the cell walls, vacuoles, mitochondria, plasmalemma, tonoplast, and xylem parenchyma of root cells. While Moso bamboo seems a suitable candidate for phytoremediation, its metal remediation ability should be further explored in future investigations.     

Characterization of human manure-derived biochar and energy-balance analysis of slow pyrolysis process

Biochars have received increasing attention in recent years because of their soil improvement potential, contaminant immobilization properties, and ability to function as carbon sinks. This study adopted a pyrolytic process to prepare a series of biochars from dried human manure at varying temperatures. The thermal analysis of human manure and physicochemical properties of the resulting biochars illustrated that human manure can be a favorable feedstock for biochar production. In particular, the porous texture and nutrient-rich properties of biochars produced from human manure and may significantly enhance soil fertility when used as used soil additives. A temperature range of 500–600 °C was optimal for human manure biochar production. Significantly, when the moisture content of the feedstock is lower than 57%, the system could not only harvest manure-derived biochar but also have a net energy output, which can be provide heat source for nearby users.     

Former DDT factory in Pakistan revisited for remediation: severe DDT concentrations in soils and plants from within the area

A factory in Amman Garh near Nowshera, Khyber Pakhtunkhwa, Pakistan, produced dichlorodiphenyltrichloroethane (DDT) from 1963–1994. Consequently, earlier papers reported a soil contamination in the per mille range inside the former factory wall (88 m?×?106 m) and up to 10 mg/kg of DDT in the surroundings in 2005–2007. The site within the factory wall was remonitored systematically in 2011 to complement the earlier data as a prerequisite for remediation, to put them in exposure context in a population developing area, and to suggest and evaluate the optimal remediation technique for the site. The contamination was drastically higher than the earlier published data, and the sum of DDT and its metabolites (ΣDDT) was up to 65 % in the soil. Grasses, shrubs, and trees growing in this severely contaminated site had 50–450 mg/kg_dw of ΣDDT. Thus, people living nearby and husbandry as well as wild animals are heavily exposed to DDT. The semiarid climate favors wind drift and deposition of the pollutant. Additionally, DDT from products of herbivore animals feeding on the contaminated plants will enter the food web. To overcome the exposure and distribution of the DDT, the site within the factory wall was capped with 1.5 m of soil. This remediation technique represents the easiest and least expensive solution. Nevertheless, DDT can still evaporate or leach, and groundwater can rise in this flood-prone area and thereby become contaminated, especially because a binding layer is missing.