Effect of fishing vessels on trace metal contamination in sediments of three harbors along Iranian Oman Sea coast

In this study, the levels of natural and anthropogenic metal contamination (aluminum (Al), iron (Fe), manganese (Mn), arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn)) in surface sediments of three harbors along the Iranian coast of Gulf of Oman were examined and reported for the first time. Effect of grain size, mineralogy, normalization technique using Fe concentrations, and different sediment quality guidelines were discussed. Data from the harbors were compared with other harbors worldwide. Sediments inside the harbors are characterized by moderate and high levels of pollution by trace metals Cu (12–287 μg/g), Pb (11–1,780 μg/g), Zn (38–547 μg/g), Cr (70–2,370 μg/g), and Ni (31–116 μg/g). However, As and Cd did not show considerable pollution inside and outside the harbors. Considering that there is no industrial activity around the study harbors, the major sources of contamination in the harbors are repairing, fueling, greasing, and painting of fishing ships and boats. Mineralogy of sediments in the study area as well as trace metal concentration in reference samples taken from onshore geological units confirmed that natural inputs of Cd, Cu, Pb, and Zn in the harbors are very low while most of Ni and Cr contamination in the study area comes from erosion of ophiolitic mélange units at the North of Makran mountains.     

Effect of Lignocellulosic Type on Long-Term Hygroscopic Behavior of Natural Filler/HDPE Composites

Natural filler/high density polyethylene (HDPE) injection-molded composites of flour from different lignocellulosic sources were prepared, and their long-term water absorption and thickness swelling were studied. Filler samples from wheat straw, hybrid Euro-American poplar, and loblolly pine were mixed with the matrix at 35 wt% lignocellulosics content and either zero or 2% maleic anhydride grafted polyethylene (MAPE) as compatibilizer. Results indicated water absorption of all the composites followed the kinetics of a Fickian diffusion process. The water diffusion coefficient of the composites was clearly dependent upon the lignocellulosic type. The wheat straw composites showed the highest and the pine composites exhibited the lowest water absorption coefficients. The highest thickness swelling took place in the wheat straw composites, followed by the poplar and pine composites, respectively. Adding MAPE to the composites decreased the water diffusion coefficient and thickness swelling by improving the adhesion between natural filler and the HDPE.     

Determination of the effect of operating cost uncertainty on mining project evaluation

Mining projects are complex businesses that demand constant risk assessment. This is because several kinds of uncertainties influence the value of a mine project, typically. These uncertainties may be classified as exploration uncertainties, economic uncertainties and engineering uncertainties. The evaluation of a mine project under these uncertainties is a complicated job, which may lead to making a wrong decision by managers and stockholders. Therefore, at first, the engineers must recognize the mining uncertainties before carrying out the project evaluation. The economic uncertainties are the most important factors, which may affect the project evaluation. Among the mentioned uncertainties, the operating cost uncertainty is an important and effective factor, which is ignored to a certain extent.     

Ergonomics Intervention in an Iranian Tire Manufacturing Industry

The aim of an ergonomics intervention conducted in the tire manufacturing industry was to improve working conditions. Before the start, a senior manager supported the intervention. Participants were divided into teams and trained. After observing the overall performance of the teams, over 100 improvements were successfully implemented. After the improvements, there were statistically significant differences in annual and weekly prevalence of, and annual disability reported for, the upper back, the lower back, knees and wrists between before and after intervention. The annual prevalence of upper back, lower back, knee and wrist complaints decreased from, respectively, 60.3%, 50.2%, 28.9%, 25.8% before the intervention to 31.3%, 35.9%, 17.1%, 20.7% after the intervention. Significant factors were training and supportive environment based on full commitment of the top management.     

Cigarette butt littering consequences: a study of pollution rate on beaches and urban environments

Cigarette butts are hazardous wastes that are not properly discarded by most smokers. They are one of the most abundant litters in the environment and a threat to various organisms because they leak numerous pollutants. This study aimed to assess the distribution of cigarette butts in a coastal city south of the Caspian Sea in Mazandaran Province, Iran. Observations were performed using the visual survey technique based on standardized protocol. The results showed 11,261 littered cigarette butts in 15 studied urban areas ( an average of 0.306 units per square meter). Also, the average density of littered cigarette butts on the studied beaches was 0.106 per square meter. The littered cigarette butts had significant spatial variation, and the number of counts was 135 to 2090. The land-use has a significant effect on the density of littered cigarette butts due to its population density. The inquiry’s index demonstrated that 33.3% of the studied urban areas are high pollution and severe pollution, while all beaches are high and severe. Therefore, a significant focus must be considered to reduce cigarette butts littering due to the collection problems and challenges of cigarette butt management. Because the pollution on the beaches is higher than in urban areas, improving waste management services and establishing a regular cleaning program are essential.

     

Challenges on the recycling of cigarette butts

Environmental Science and Pollution Research - Cigarette butt (CB) is a crucial litter in urban communities because it may contain various toxicants. Due to serious limitations on...     

Effect of Thermo-Mechanical Degradation of Polypropylene on Hygroscopic Characteristics of Wood Flour-Polypropylene Composites

In this research, the influence of thermo-mechanical degradation of polypropylene (PP) on water absorption and thickness swelling of beech wood flour–PP composites were studied. For this purpose, a virgin PP was thermo-mechanically degraded by two times extrusion under controlled conditions. The results showed that the melt flow index, water absorption and thickness swelling of PP significantly increase by extrusion and re-extrusion. The virgin PP and degraded polypropylene were compounded with wood flour (at 60% by weight wood flour loading) in a counter-rotating twin-screw extruder in presence or absence of MAPP to produce wood flour–PP composites. From the results, the composites containing recycled PP exhibited higher water absorption and thickness swelling. The use of MAPP decreased water absorption and thickness swelling in composites made of virgin or recycled PP.     

Assessment of the Effectiveness of Protected Areas Management in Iran: Case Study in Khojir National Park

The requirement to assess the management effectiveness (ME) in protected areas (PAs) is increasing around the world to help improve management and accountability. An evaluation of ME for Khojir National Park (KNP), one of the Iran’s oldest PAs, was conducted using a multi-method approach that consisted of structured interviews, open interviews, and site visits. This was the first ME evaluation in Iran. The structured interview was based on the management effectiveness tracking tool methodology. KNP received an average score of 43 %, which is lower than the global average, illustrating that its general management was in the low-intermediate level. The indices of legal status, resource inventory, planning for land and water use, regulations, and objectives received the highest average scores, whereas education and awareness, community co-management, regular work plan, boundary demarcation, visitor facilities, budget sources, staff training, protection systems, and management plan received the lowest ones. The management system of KNP was generally established, but many problems of the management still need to be resolved. To improve ME, some countermeasures should be taken, such as increasing funding, strengthening capacity building, planning, and adaptive management, and implementing community participation.     

Effects of heterogeneities on capillary pressure-saturation-relative permeability relationships

In theories of multiphase flow through porous media, capillary pressure-saturation and relative permeability-saturation curves are assumed to be intrinsic properties of the medium. Moreover, relative permeability is assumed to be a scalar property. However, numerous theoretical and experimental works have shown that these basic assumptions may not be valid. For example, relative permeability is known to be affected by the flow velocity (or pressure gradient) at which the measurements are carried out. In this article, it is suggested that the nonuniqueness of capillary pressure-relative permeability-saturation relationships is due to the presence of microheterogeneities within a laboratory sample. In order to investigate this hypothesis, a large number of "numerical experiments" are carried out. A numerical multiphase flow model is used to simulate the procedures that are commonly used in the laboratory for the measurement of capillary pressure and relative permeability curves. The dimensions of the simulation domain are similar to those of a typical laboratory sample (a few centimeters in each direction). Various combinations of boundary conditions and soil heterogeneity are simulated and average capillary pressure, saturation, and relative permeability for the "soil sample" are obtained. It is found that the irreducible water saturation is a function of the capillary number; the smaller the capillary number, the larger the irreducible water saturation. Both drainage and imbibition capillary pressure curves are found to be strongly affected by heterogeneities and boundary conditions. Relative permeability is also found to be affected by the boundary conditions; this is especially true about the nonaqueous phase permeability. Our results reveal that there is much need for laboratory experiments aimed at investigating the interplay of boundary conditions and microheterogeneities and their effect on capillary pressure and relative permeability.