AQUATOX: Modeling environmental fate and ecological effects in aquatic ecosystems

AQUATOX combines aquatic ecosystem, chemical fate, and ecotoxicological constructs to obtain a truly integrative fate and effects model. It is a general, mechanistic ecological risk assessment model intended to be used to evaluate past, present, and future direct and indirect effects from various stressors including nutrients, organic wastes, sediments, toxic organic chemicals, flow, and temperature in aquatic ecosystems. The model has a very flexible structure and provides multiple analytical tools useful for evaluating ecological effects, including uncertainty analysis, nominal range sensitivity analysis, comparison of perturbed and control simulations, and graphing and tabulation of predicted concentrations, rates, and photosynthetic limitations. It can represent a full aquatic food web, including multiple genera and guilds of periphyton, phytoplankton, submersed aquatic vegetation, invertebrates, and fish and associated organic toxicants. It can model up to 20 organic chemicals simultaneously. (It does not model metals.) Modeled processes for organic toxicants include chemodynamics of neutral and ionized organic chemicals, bioaccumulation as a function of sorption and bioenergetics, biotransformation to daughter products, and sublethal and lethal toxicity. It has an extensive library of default biotic, chemical, and toxicological parameters and incorporates the ICE regression equations for estimating toxicity in numerous organisms. The model has been implemented for streams, small rivers, ponds, lakes, reservoirs, and estuaries. It is an integral part of the BASINS system with linkage to the watershed models HSPF and SWAT.     

Regional transport and urban contributions to fine particle concentrations in southeastern Canada

The impact of various atmospheric transport directions on ambient fine particle (PM2.5) concentrations at several sites in southeastern Canada was estimated (for May-September) using back-trajectory analysis. Three-day back trajectories (four per day) were paired with 6-hr average PM2.5 mass concentrations measured using tapered element oscillating microbalances (TEOM). PM2.5 concentrations at rural locations in the region were affected by nonlocal sources originating in both Canada and the United States. Comparison of sites revealed that, on average, the local contribution to total PM2.5 in the greater Toronto area (GTA) is approximately 30-35%. At each location, average PM2.5 concentrations under south/southwesterly flow conditions were 2-4 times higher than under the corresponding northerly flow conditions. The chemical composition of both urban and rural PM2.5 was determined during two separate 2-week spring/summer measurement campaigns. Components identified included SO4(2-) NO3-, NH4+, black carbon and organic carbon (OC), and trace elements. Higher particle mass at the urban Toronto site was composed of a higher proportion of all components. However, black carbon, NO3-, NaCl, and trace elements were found to be the most enriched over the rural/regional background levels.     

Pilot-scale constructed wetlands for petroleum-contaminated groundwater.

A pilot study was conducted to determine the feasibility of using constructed treatment wetlands to remediate recovered groundwater from the subsurface of a former refinery site. The pilot system consisted of four subsurface flow treatment cells operated in an upward vertical flow mode and equipped with subsurface aeration lines. The treatment system showed minimal capability for methyl-tert-butyl ether removal, but did effectively remove total petroleum hydrocarbons-deisel range organics and total benzene, toluene, ethylbenzene, and o-, m-, and p-xylenes (total BTEX). Effluent benzene concentrations were less than 0.05 mg/L in 70% of the samples from a treatment cell using subsurface aeration and a wetland sod amendment. Based on 1 year of operating data, cumulative mass removal approached 80% for benzene and 88% for total BTEX.     

Preparation of acidic and alkaline macrocapsules for pH control

A series of experiments was performed to prepare acidic macroencapsulated buffers composed of 20% Ca(H2PO4)(2) and 80% Eudragit S 100 polymer and alkaline macrocapsules composed of 65% K2HPO4 and 35% Eudragit E PO polymer (the powdered form of Eudragit E 100). Eudragit S 100 was shown to be soluble at a pH greater than 7.0, while Eudragit E 100 was soluble at a pH less than 7.0. Both polymers did not impart significant biochemical oxygen demand. The Eudragit E PO polymer solution showed low toxicity (EC50=91%) based on the Microtox Acute Toxicity Test compared to the 0.1mM background phosphate buffer solution (EC50=100%) while the Eudragit S 100 polymer solution showed higher toxicity (EC50=53%). Batch tests showed that the acidic macrocapsules reduced the pH of a 0.1mM phosphate solution from 11 to neutral, while the alkaline macrocapsules increased the pH of a 0.1mM phosphate solution from 3 to neutral. The macrocapsules could potentially be used as an in situ proportional pH controller for groundwater remediation.     

Baseline concentrations of trace elements in residential soils from Southeastern Missouri

Anthropogenic sources of pollution can significantly contribute to elevated concentrations of toxic elements in soils. A preliminary survey of trace elements content and their availability in residential soils from New Madrid County, Missouri was undertaken. Mean elemental concentrations (mg kg⁻¹, dry wt) of sixty two soil samples were: As 6.6, Be 0.8, Cd 1.6, Co 9.7, Cr 24.5, Cu 18.1, Fe 9951, Mn 298, Ni 15.6, Pb 48.8, V 42.1, Zn 95.5 and Hg 0.05. The US EPA preliminary remediation goals (PRGs) was only exceeded by As (7 % of samples) and V (8% of samples). The Missouri average background values were exceeded by Pb (69%), Zn (31%), Cu (27%), As (23%), Be (19%), Co (18%), Ni (16%), V (8%) and Mn (2%). Crustal enrichments (EF_c) for As (97), Cr (6), Cu (10), Pb (121), V (7), and Hg (17) were highest for North Lilbourn soils. Fractionation experiment revealed that Fe (54–79%) was in the residual phase while Zn (70–90%), Mn (88–92%), As (59–81%) and Pb (63–79%) were potentially available in soils. Factor loadings of the element concentrations on principal components 1, 2 and 3 accounted for over 81% variance of the data set. The factor loadings suggested that apart from natural contributions of trace elements to the soils, human activities possibly accounted for other inputs in soils.     

Regional Transport and Urban Contributions to Fine Particle Concentrations in Southeastern Canada

Abstract

The impact of various atmospheric transport directions on ambient fine particle (PM_2.5) concentrations at several sites in southeastern Canada was estimated (for May-September) using back-trajectory analysis. Three-day back trajectories (four per day) were paired with 6-hr average PM_2.5 mass concentrations measured using tapered element oscillating microbalances (TEOM). PM_2.5 concentrations at rural locations in the region were affected by nonlocal sources originating in both Canada and the United States. Comparison of sites revealed that, on average, the local contribution to total PM_2.5 in the greater Toronto area (GTA) is approximately 30–35%. At each location, average PM_2.5 concentrations under south/southwesterly flow conditions were 2–4 times higher than under the corresponding northerly flow conditions. The chemical composition of both urban and rural PM_2.5 was determined during two separate 2-week spring/summer measurement campaigns. Components identified included SO₄ ^2?, NO₃ ^?, NH₄+, black carbon and organic carbon (OC), and trace elements. Higher particle mass at the urban Toronto site was composed of a higher proportion of all components. However, black carbon, NO₃ ^?, NaCl, and trace elements were found to be the most enriched over the rural/regional background levels.     

Use of the MicroResp™ method to assess pollution-induced community tolerance to metals for lotic biofilms

Understanding the ecological status of aquatic ecosystems and the impact of anthropogenic contamination requires correlating exposure to toxicants with impact on biological communities. Several tools exist for assessing the ecotoxicity of substances, but there is still a need for new tools that are ecologically relevant and easy to use. We have developed a protocol based on the substrate-induced respiration of a river biofilm community, using the MicroResp™ technique, in a pollution-induced community tolerance approach. The results show that MicroResp™ can be used in bioassays to assess the toxicity toward biofilm communities of a wide range of metals (Cu, Zn, Cd, Ag, Ni, Fe, Co, Al and As). Moreover, a community-level physiological profile based on the mineralization of different carbon substrates was established. Finally, the utility of MicroResp™ was confirmed in an in-situ study showing gradient of tolerance to copper correlated to a contamination gradient of this metal in a small river.