Remediation of MTBE-Contaminated Water and Soil

As the number of leaking underground fuel tank sites with methyl tertiary butyl ehter (MTBE) contamination continues to grow, there is a need to develop cost-effective solutions for treatment of soil and water contamination. MTBE poses special challenges because of its physicochemical properties, in particular high solubility and low Henry's constant, low affinity for sorption, and very slow rate of microbial degradation. Advanced oxidation processes tend to generate undesirable by-products. Based on laboratory studies with hollow fiber membranes (HFM), a field-scale unit was constructed and tested at a number of sites, to determine the effectiveness of this technology in dealing with MTBE contamination. In addition, to treat the soil contamination, the HFM unit was coupled with a Spray Aeration Vapor Extraction (SAVE) unit, which is based on an internal combustion engine. The engine provides the means to treat soil vapors, as well as organic vapors from the spray aeration and HFM units. The overall treatment objectives of 5μg/l for MTBE and 1 μg/l for benzene were achieved with a treatment train consisting of an ion exchange unit, a spray aeration system, a hollow fiber membrane module and two granular activated carbon (GAC) units, for flowrates ranging from 3.8 to 30 l/min (1 to 8 gal/min). The ion exchange unit sewed to reduce water hardness and avoid scaling in the subsequent treatment units, extending the run-time of the entire system. Overall removal efficiencies for the spray aeration system and hollow fiber membrane module ranged from 85 to over 99 percent. High removal efficiencies (> 97%) were obtained at elevated water temperatures (54°C) or lower flowrates (up to 11 l/min). The GAC units were used only to polish the effluent and meet the discharge requirements. Soil, water, and gas phases are treated with this system. Cost estimates are provided for similar treatment processes, for water flowrates up to 38 l/min (10 gal/min). © 1999 John Wiley & Sons, Inc.     

Adaptation options in agriculture to climate change: a typology

Adaptation in agriculture to climate change is important for impact andvulnerability assessment and for the development of climate change policy. A wide variety of adaptation options has been proposed as having thepotential to reduce vulnerability of agricultural systems to risks related toclimate change, often in an ad hoc fashion. This paper develops atypology of adaptation to systematically classify and characterize agriculturaladaptation options to climate change, drawing primarily on the Canadiansituation. In particular, it differentiates adaptation options in agricultureaccording to the involvement of different agents (producers, industries,governments); the intent, timing and duration of employment of theadaptation; the form and type of the adaptive measure; and the relationshipto processes already in place to cope with risks associated with climatestresses. A synthesis of research on adaptation options in Canadianagriculture identifies four main categories: (i) technological developments,(ii) government programs and insurance, (iii) farm production practices,and (iv) farm financial management. In addition to these `directadaptations', there are options, particularly information provision, that maystimulate adaptation initiatives. The results reveal that most adaptationoptions are modifications to on-going farm practices and public policydecision-making processes with respect to a suite of changing climatic(including variability and extremes) and non-climatic conditions (political,economic and social). For progress on implementing adaptations to climatechange in agriculture there is a need to better understand the relationshipbetween potential adaptation options and existing farm-level andgovernment decision-making processes and risk management frameworks.     

Prenatal diagnosis of multiple acyl-CoA dehydrogenase deficiency: association with elevated α-fetoprotein and cystic renal changes

We report the occurrence of multiple acyl-CoA dehydrogenase deficiency (MADD) in two consecutive pregnancies in a young, Caucasian, non-consanguineous couple. In the first pregnancy, the maternal serum α-fetoprotein was elevated. A sonogram showed growth delay, cystic renal disease, and oligohydramnios; the parents decided to terminate the pregnancy. Postmortem examination confirmed the cystic renal disease and showed hepatic steatosis, raising the suspicion of a metabolic disorder. The diagnosis of MADD was made by immunoblot studies on cultured fibroblasts. In the subsequent pregnancy, a sonogram at 15 weeks' gestation showed an early growth delay but normal kidneys. The maternal serum and amniotic fluid concentrations of α-fetoprotein were elevated, and the amniotic fluid acylcarnitine profile was consistent with MADD. In vitro metabolic studies on cultured amniocytes confirmed the diagnosis. A follow-up sonogram showed cystic renal changes. These cases provide additional information regarding the evolution of renal changes in affected fetuses and show a relationship with elevated α-fetoprotein, which may be useful in counseling the couple at risk. MADD should be considered in the differential diagnosis of elevated α-fetoprotein and cystic renal disease. Early growth delay may be an additional feature. Copyright © 2001 John Wiley & Sons, Ltd.     

Population Persistence in Florida Torreya: Comparing Modeled Projections of a Declining Coniferous Tree

Abstract: The Florida torreya (   Torreya taxifolia ) is a coniferous tree endemic to a 35-km stretch of bluffs and ravines along the east side of the Apalachicola River in northern Florida and southern Georgia. This formerly locally abundant tree has declined as a result of disease during the 1950s and is on the U.S. endangered species list. With no seed production in the wild, this species is headed toward extinction. We conducted a survey on roughly 200 trees from 1988 to 1996 and used these data to estimate the likelihood of population persistence during the next several decades. We compared a stage-class transition matrix model ( RAMAS) and an individual-based stochastic model ( TORSIM) of growth and mortality to project future populations. Given the current lack of seed production in the wild, all models predict extinction. The question of concern is the imminence of this predicted extinction. Differing predicted times to extinction would suggest different immediate management recommendations. Both models predicted an over 90% likelihood of persistence during the next 50 years. Predictions differed in that the transition matrix model was less optimistic than the individual-based model regarding persistence. Model sensitivity analysis showed that the results were robust to significant decreases in growth and sprouting probabilities. Submodels identified different persistence likelihoods in different populations. Nonetheless, unless management of the population can facilitate maturation and seed production, extinction of this species in the wild is inevitable.     

A Methodology for an integrated risk assessment of spatially relevant hazards

Natural and technological disasters of the past have shown that such incidences significantly affect local and regional development. Faced with the task of ensuring economic, human and environmental development as well as insuring physical structures, planning authorities, insurance companies and emergency managers are looking for methodologies to identify highly sensitive areas in terms of their overall risk. Existing methodologies like the Natural Hazard Index for Megacities or the Total Place Vulnerability Index have limitations due to their sectoral approach, which makes them less useful for integrated spatial planning. This paper presents the Integrated Risk Assessment of Multi-Hazards as a new approach to serve as a basis for a spatial risk management process. The approach integrates various hazards into an integrated hazard map, combines this with the region's vulnerability and thus produces an integrated risk map. Moreover, the methodology offers a tool to derive weighting factors for hazards as well as for vulnerability components.     

Modeling particle loss in ventilation ducts

Empirical equations were developed and applied to predict losses of 0.01–100 μm airborne particles making a single pass through 120 different ventilation duct runs typical of those found in mid-sized office buildings. For all duct runs, losses were negligible for submicron particles and nearly complete for particles larger than 50 μm. The 50th percentile cut-point diameters were 15 μm in supply runs and 25 μm in return runs. Losses in supply duct runs were higher than in return duct runs, mostly because internal insulation was present in portions of supply duct runs, but absent from return duct runs. Single-pass equations for particle loss in duct runs were combined with models for predicting ventilation system filtration efficiency and particle deposition to indoor surfaces to evaluate the fates of particles of indoor and outdoor origin in an archetypal mechanically ventilated building. Results suggest that duct losses are a minor influence for determining indoor concentrations for most particle sizes. Losses in ducts were of a comparable magnitude to indoor surface losses for most particle sizes. For outdoor air drawn into an unfiltered ventilation system, most particles smaller than 1 μm are exhausted from the building. Large particles deposit within the building, mostly in supply ducts or on indoor surfaces. When filters are present, most particles are either filtered or exhausted. The fates of particles generated indoors follow similar trends as outdoor particles drawn into the building.