Economies of size and density in municipal solid waste recycling in Portugal

The recycling of municipal solid waste has a remarkable importance in the preservation of the environment and the welfare of the society. However, it is also important that this service can be provided with efficient costs. This paper aims to search for economies of output density and economies of size in the selective collection and recycling activities in Portugal and to identify the size the utilities should have to become more cost efficient. The sample comprises all Portuguese recycling utilities operating in the wholesale segment in the period 2006–2010. The results show that the Portuguese recycling utilities should increase the quantities of municipal solid waste for recycling (especially glass and paper) and also become larger to dimensions corresponding to a supply of 400–550 thousand inhabitants. With the increasing amount of glass collected, utilities are simultaneously struggling to fulfill the targets established by the European legislation and explore the existing economies of output density. The results also show that the management of these services carried out by private companies and the use of incineration (by utilities) seem to reduce the costs of utilities while the regulation of these services and the composting of waste held by utilities tend to increase costs.     

Integration of ozonation and an anaerobic expanded granular sludge bed reactor for micropollutant removal from sewage

Environmental Science and Pollution Research - Conventional sewage treatment systems are generally not designed to remove micropollutants, requiring the development of new technologies, such as the...     

Ecotoxicity of imidacloprid to soil invertebrates in two tropical soils with contrasting texture

Environmental Science and Pollution Research - Imidacloprid is one of the most commercialized insecticides in agriculture in the world, with a broad spectrum of action. However, little is known...     

Mandating interlocks for fully revoked offenders: the New Mexico experience

OBJECTIVE: In New Mexico, between July 1999 and December 2002, the installation of an ignition interlock was an optional judicial sanction for second and third driving-while-impaired (DWI) offenders. This is a study of the recidivism of 437 offenders who were convicted and installed interlocks for an average of 322 days during that period. METHODS: The comparison group was a stratified random sample (N = 12,554) of the 20,949 offenders who were convicted during the same period but did not install interlocks. DWI arrest and conviction data for all study participants were received from the Motor Vehicle Department's Citation Tracking System. RESULTS: Only 11 (2.5%) of the interlock offender group were rearrested for DWI while interlocks were installed, whereas 1,017 (8.1%) of the comparison group were rearrested during an equivalent 322-day period. Survival graphs and Cox proportional hazard regression analyses were used to compare the interlock and noninterlock groups during installation, after installation, and for the entire period up to December 2004. Results indicate a reduction in recidivism of 65% during installation. After removal, there was no significant difference in recidivism rates in a 3-year follow-up period. Following all offenders for 4 years, including both the period while the interlock was installed and the period after its removal, indicates that the difference in recidivism achieved during installation, though not increased, is maintained, so at the end of 4 years, interlock users still have lower total recidivism than nonusers. CONCLUSIONS: The magnitude of interlock effectiveness reported here is similar to those in other published studies with comparable samples.     

Morphological responses and tolerance of a tree native to the Brazilian Cerrado Astronium fraxinifolium Schott to boron toxicity

Environmental Science and Pollution Research - The indiscriminate use of fertilizers and chemical pesticides can lead to boron contamination of the soil. Decontamination in general is expensive and...     

Emissions from a controlled fire in municipal solid waste bales

Environmental and safety aspects of seasonal storage of baled municipal solid waste to be used as fuel for energy production (waste fuel), was investigated and experiments were carried out on burning of bales. The flammability, combustion processes and emissions were studied by simulating, in small-scale, potential effects of a possible fire in full-scale bale storage area. Despite the high water content and the high density of the bales, after setting fire, the bales burned well, even though no risk for self-ignition exists. The following parameters of the combustion product were measured continuously: O2, CO2, CO, SO2, NO, NO2, NOx, THC, smoke gas rate and the temperature of the smoke. Soot particles in the smoke were collected and analysed for Hg, Pb, Cd, As, Ni, Cr, Mn, Cu, Co, Sb and V concentrations. The analysis of the moisture content, concentrations of Hg, Cd, HCl, HF, HBr, NH3, polyaromatic hydrocarbons (PAH), chlorinated and brominated dioxins (PCDD/F and PBrDD/F, respectively) were carried out. It was found that the PCDD/F levels (TEQs) varied according to the system used: 12.53 ng (I-TEF-88)/Nm3; 14.09 ng (I-TEF-99)/Nm3; 13.86 ng (Eadons)/Nm3. The PAH concentration was 3.04 microg/Nm3. The contents of the metals in the smoke (with the exceptions of Pb and Cd with mean values of 1.74 and 0.36 mg/m3, respectively) were below the limit values established by the Swedish Ministry of Environment for emissions from incineration plants [Swedish Ministry of Environment, (2002:1060), F?rordning 2002:1060 om avfallsf?rbr?nning. Available from http://www.notisum.se/rnp/SLS/LAG/20021060.HTM]/EU-directive [(2000/76/EC), Directive 2000/76/EC, of the European Parliament and of the Council of 4 December 2000 on the Incineration of Waste. http://www.Scotland. gov.uk/library5/environment/iecda.pdf]. The HCl concentration was 10 times higher than the limit value (mean value of 99 mg/m3).     

Physico-chemical characteristics of fine fraction materials from an old crystal glass dumpsite in Sweden

Physico-chemical characteristics of waste, particularly fine fraction (FF), from an old crystal glass waste dump in Sweden were studied to assess recycling or disposal alternatives. Hand-sorting of the waste indicated glass content of 44.1% while sieving established the FF as a more soil-like mix of glass and other materials constituting 33.3% of all excavated waste. The FF was around neutral pH with 24.4% moisture content, low values of Total Dissolved Solids, Dissolved Organic Carbon and fluorides, but hazardous concentrations of As, Cd, Pb and Zn according to the Swedish Environmental Protection Agency guidelines. While the FF leached metals in low concentrations at neutral pH, it leached considerably during digestion with nitric acid, implying leaching risks at low pH. Thus, the waste requires safe storage in hazardous waste class ‘bank account’ storage cells to avoid environmental contamination as metal recovery and other recycling strategies for the glass waste are being developed. The study could fill the information gap regarding preservation of potential resources in the on-going, fast-paced excavation and re-landfilling of heavy metal contaminated materials in the region.     

Genotoxic Effect of Phenol on the Cells of Onion (Allium cepa) Roots

The roots of onion (Allium cepa) stand out for having cells with large size and small number of chromosomes.These characteristics make them useful in bioassays for the measurement of a variety of cytogenetic and morphological parameters , in which they can be used as toxicity indicators of the induction and formation of micronuclei and chromosomal aberrations.Based on this background , the potential genotoxic effect of phenol concentration on cells of A.ceparoots was investigated either in terms of induced aberrations or micronuclei formation.The results demonstrated that the higher the concentration of phenol , the higher the incidence of abnormalities , thus confirming the genotoxicity of this pollutant.     

A measure of sustainability of Brazilian agribusiness using directional distance functions and data envelopment analysis

The social and environmental impacts caused by the modernization of Brazilian agribusiness have evoked a growing interest in the search of balance between social-economics development and the adequate use of natural resources, driving the country to sustainable development. Therefore, the main aim of this article is to estimate a set of indicators of relative efficiency in the Brazilian agricultural sector, which satisfy the concept of Pareto optimality, potentiates simultaneously both economic, ecological dimensions and social functions. To reach this purpose, the method of directional distance functions and data envelopment analysis was applied. These indicators confirm, in different ways, the hypothesis that it is possible to perform consistent productive strategies with the maximization of social welfare, despite the apparent antagonism among these three dimensions. In addition, it is shown that efficient Brazilian states tend to combine the three dimensions in different ways. Hence, it can be concluded that several equilibrium taken sustainable can be achieved through different actions on poverty and environmental impact reduction without necessarily generating productive inefficiencies. This result can be considered of prominent importance for sustainable development in Brazil and can also serve as a reference in the definition of goals of the plan ‘Brazil without Misery’ and international commitments to reduce Greenhouse Gas – GHG – in Brazil, especially for the 17 inefficient Brazilian states.