Atmospheric Particulate Matter and Polycyclic Aromatic Hydrocarbons for PM10 and Size-Segregated Samples in Bangkok

Abstract

Air samples of particulate matter (PM) with an aerodynamic diameter less than 10 µm (PM₁₀) were collected from six sites in Bangkok, Thailand, using high-volume air samplers. Daily samples were taken at intervals of 12 days from November 1999 to November 2000. Size-selected sampling using a multislit Andersen size-fractionated cascade impactor was undertaken at one site in central Bangkok to identify particulate size distribution. The annual average PM₁₀ concentration at all six sites exceeded the Thailand National Ambient Air Quality Standard (NAAQS) of 50 µg/m³. The daily PM₁₀ concentrations at heavy traffic roadside areas ranged between 30 and 160 µg/m³. The highest PM₁₀ level occurred during the winter period (November–February), which is the dry season. From our results, which are based on a 1-yr survey, it can be observed that the particulate concentrations are associated with traffic volumes and seasonal factors (temperature and rainfall). The relative importance of size fractions in contributing to PM load is presented and discussed. Twenty polycyclic aromatic hydro-carbons (PAHs) associated with PM have been identified and quantified. The summed PAHs based on the 20 species had an average concentration of 60 ng/m³. Benzo(e)pyrene, indeno(123cd)pyrene, and benzo(ghi)perylene were the major compounds with average concentrations of 8, 10, and 13 ng/m³, respectively. Results indicate that more than 97% of PAHs were found in the small particulate size range of <0.95 µm.     

Spatial Variability of Different Fractions of Particulate Matter within an Urban Environment and between Urban and Rural Sites

ABSTRACT

The spatial variability of different fractions of particulate matter (PM) was investigated in the city of Basel, Switzerland, based on measurements performed throughout 1997 with a mobile monitoring station at six sites and permanently recorded measurements from a fixed site. Additionally, PM₁₀ measurements from the following year, which were concurrently recorded at two urban and two rural sites, were compared.

Generally, the spatial variability of PM₄, PM₁₀, and total suspended particulates (TSP) within this Swiss urban environment (area = 36 km²) was rather limited. With the exception of one site in a street canyon next to a traffic light, traffic density had only a weak tendency to increase the levels of PM. Mean PM₁₀ concentration at six sites with different traffic densities was in the range of less than ±10% of the mean urban PM₁₀ level. However, comparing the mean PM levels on workdays to that on weekends indicated that the impact of human activities, including traffic, on ambient PM levels may be considerable.

Differences in the daily PM₁₀ concentrations between urban and more elevated rural sites were strongly influenced by the stability of the atmosphere. In summer, when no persistent surface inversions exist, differences between urban and rural sites were rather small. It can therefore be concluded that spatial variability of annual mean PM concentration between urban and rural sites in the Basel area may more likely be caused by varying altitude than by distance to the city center.     

Biliary PAH metabolites, EROD activity and DNA damage in dab (Limanda limanda) from Seine Estuary (France)

The Seine Estuary is well known to be widely contaminated by organic pollutants and especially by polycyclic aromatic hydrocarbons (PAHs). Fish are known to metabolize PAHs, leading to different toxic effects at both cellular and sub-cellular levels. In this work, we studied the relationships between the 7-ethoxyresorufin-O-deethylase (EROD) activity in the liver, the level of DNA strand breaks in blood cells and the concentration of PAH metabolites in the bile of the sentinel flatfish species Limanda limanda. Muscle and liver samples were analysed for parent PAH levels. Female and male dabs of two size classes (juveniles and adults) were collected by trawling in two sites with different degrees of pollution during March and September 2005 and 2006. Significant effects of sex, age, site and season were demonstrated on EROD activity and the level of strand breaks. Parent PAH concentrations in dabs did not allow discriminating of the two sampling sites. However, for PAH metabolites, significant differences were observed with sites and seasons. Dabs collected at the mouth of the estuary appeared to be the most impacted when looking at the results obtained with the three selected markers. The significant correlations observed between the level of PAH metabolites and the level of DNA lesions showed the importance of a combined analysis of chemical and biochemical markers to correctly assess the contribution of chemical contamination to the toxic effects measured in situ in fish.     

Alkylphenolic compounds and bisphenol A contamination within a heavily urbanized area: case study of Paris

This study evaluates the influence of a heavily urbanized area (Paris Metropolitan area), on receiving water contamination by both bisphenol A (BPA) and alkylphenol ethoxylate (APE) biodegradation product. The study began by investigating concentrations within urban sources. In addition to the more commonly studied wastewater treatment plant effluent, wet weather urban sources (including combined sewer overflows, urban runoff, and total atmospheric fallout) were considered. The initial results highlight a significant contamination of all urban sources (from a few nanograms per liter in atmospheric fallout to several micrograms per liter in the other sources) with clearly distinguishable distribution patterns. Secondly, concentration changes along the Seine River from upstream of the Paris Metropolitan area to downstream were investigated. While the concentrations of BPA and nonylphenoxy acetic acid (NP₁EC) increase substantially due to urban sources, the 4-nonylphenol concentrations remain homogeneous along the Seine. These results suggest a broad dissemination of 4-nonylphenol at the scale of the Seine River basin. Moreover, the relationship between pollutant concentrations and Seine River flow was assessed both upstream and downstream of the Paris conurbation. Consequently, a sharp decrease in dissolved NP₁EC concentrations relative to Seine River flow underscores the influence of single-point urban pollution on Seine River contamination. Conversely, dissolved 4-nonylphenol concentrations serve to reinforce the hypothesis of its widespread presence at the Seine River basin scale.     

Emissions Control and Ambient Air Quality at a Secondary Steel Production Facility

Steel production from electric arc furnaces has been continuously rising over the past few years. The trend is expected to continue due to both the anticipated increase in demand for steel, and to the replacement of obsolete open hearth furnaces. In 1972 steel produced in electric arc furnaces, which makes up 25 to 30% of the annual United States steel production, was produced primarily from recycled scrap steel in approximately 300 electric arc furnaces operated by 99 companies at 121 locations.¹ Over half of these furnaces are smaller than 50 tons, and many are located in small bar mills producing a variety of merchant steel products.     

A Canadian Federal Viewpoint on the Regulatory Process for Air Pollution Control

The following remarks are excerpted from an address presented by Mr. Rivers on October 7, 1980 to the 4th annual meeting of the Atlantic Canada Chapter of APCA's Northeast Atlantic International Section.     

Estimation of Process Change for Industrial Pollution Abatement

Abstract

When forecasting the impacts of pollution control regulations upon industries which produce pollutants jointly with ordinary outputs, potential input and production process adjustments must be identified and assessed. The problem addressed here is that the empirical approximation of Joint production processes by a single-equation Least Squares (LS) regression misrepresents restrictions on input substitution possibilities. In such cases, some inputs are allocated to both production processes, which provides the jointness. But other inputs contribute to only one process and do not contribute to adjustment opportunities in the other process. Since single-equation LS regression assumes that all inputs can be substituted throughout the production process, its application results in a misspecified empirical model. This paper presents a theoretical framework that motivates the use of Seemingly Unrelated Regression (SUR) estimators to directly approximate such processes. The advantage to using the SUR estimators is that they exploit the related nature of the input decisions so that a more accurate model of the processes can be estimated. The framework is demonstrated with an application to the case of SO₂ abatement by coal-fired electricity generating units. The results indicate that these units could efficiently burn more low-BTU, low-sulfur coal to maintain the same electricity output with a lower SO₂ emission rate. More generally, this application demonstrates the usefulness of the framework developed here.     

Observations Less than the Analytical Limit of Detection: A New Approach

Abstract

Solutions are given for plume rise assuming a power-law wind speed profile in a stably stratified layer for point and finite sources with initial vertical momentum and buoyancy. For a constant wind speed, these solutions simplify to the conventional plume rise equations in a stable atmosphere. In a shear layer, the point of maximum rise occurs further downwind and is slightly lower compared with the plume rise with a constant wind speed equal to the wind speed at the top of the stack. If the predictions with shear are compared with predictions for an equivalent average wind speed over the depth of the plume, the plume rise with shear is higher than plume rise with an equivalent average wind speed.     

Biogeochemical behaviour and bioremediation of uranium in waters of abandoned mines

The discharges of uranium and associated radionuclides as well as heavy metals and metalloids from waste and tailing dumps in abandoned uranium mining and processing sites pose contamination risks to surface and groundwater. Although many more are being planned for nuclear energy purposes, most of the abandoned uranium mines are a legacy of uranium production that fuelled arms race during the cold war of the last century. Since the end of cold war, there have been efforts to rehabilitate the mining sites, initially, using classical remediation techniques based on high chemical and civil engineering. Recently, bioremediation technology has been sought as alternatives to the classical approach due to reasons, which include: (a) high demand of sites requiring remediation; (b) the economic implication of running and maintaining the facilities due to high energy and work force demand; and (c) the pattern and characteristics of contaminant discharges in most of the former uranium mining and processing sites prevents the use of classical methods. This review discusses risks of uranium contamination from abandoned uranium mines from the biogeochemical point of view and the potential and limitation of uranium bioremediation technique as alternative to classical approach in abandoned uranium mining and processing sites.     

Cultivating Chlorella vulgaris and Scenedesmus quadricauda microalgae to degrade inorganic compounds and pesticides in water

Environmental Science and Pollution Research - This work evaluates the possibility of cultivating Scenedesmus quadricauda and Chlorella vulgaris microalgae in wastewater from the hydroponic...