Pine needle and semi-permeable membrane device derived organochlorine compounds (OCPs) concentrations in air in Mersin Province to Taurus,Turkey

Abstract

Organochlorine pesticides (OCPs) were analyzed in three different ages (half-, 1.5-, 2.5-year-old) for needles and semi permeable membrane devices (SPMDs) at three deployment periods from sea level to 1881 meter above sea level. Individual HCHs concentrations ranged between 1.4 and 129?pg/g fw depending on the age and sampling season while 2.5-year-old needles showed higher HCHs levels compared to half and 1.5- year-old. Correlation between elevation and HCH concentration in SPMDs was found but not in needle samples. Concentrations of HCHs in SPMDs indicated clearly cold condensation effect on accumulation in winter period and increased with altitude. Concentrations of DDTs in half and 1.5-year-old needles were lower than 2.5-year-old needles. The highest total concentration of DDTs was detected in 1-year-period SPMD. Higher concentrations were found in 2.5-year-old needles for other OCPs. Seasonal and altitude-dependent changes were not observed for other OCPs in SMPDs. Total accumulation of OCPs in SPMDs were found higher than in needles. On the contrary, an increased accumulation rate was observed for HCHs in SPMD. In general, Total concentrations of DDTs and HCHs were similar to total of other OCPs in all altitudes when dominating endosulfan wasnot taken into account in the computation of total concentration of other OCPs.     

Major air pollutants in Bursa,Turkey: their levels,temporal changes,interactions, and sources

Bursa is one of the largest cities of Turkey and it hosts 17 organized industrial zones. Parallel to the increase in population, rapidly growing energy consumption, and increased numbers of transport vehicles have impacts on the air quality of the city. In this study, regularly calibrated automatic samplers were employed to get the levels of air pollution in Bursa. The concentrations of CH₄ and N-CH₄ as well as the major air pollutants including PM₁₀, PM_2.5, NO, NO₂, NO_x, SO₂, CO, and O₃, were determined for 2016 and 2017 calendar years. Their levels were 1641.62?±?718.25, 33.11?±?5.45, 42.10?±?10.09, 26.41?±?9.01, 19.47?±?16.51, 46.73?±?16.56, 66.23?±?32.265, 7.60?±?3.43, 659.397?±?192.73, and 51.92?±?25.63 µg/m³ for 2016, respectively. Except for O₃, seasonal concentrations were higher in winter and autumn for both years. O₃, CO, and SO₂ had never exceeded the limit values specified in the regulations yet PM₁₀, PM_2.5, and NO₂ had violated the limits in some days. The ratios of CO/NO_x, SO₂/NO_x, and PM_2.5/PM₁₀ were examined to characterize the emission sources. Generally, domestic and industrial emissions were dominated in the fall and winter seasons, yet traffic emissions were effective in spring and summer seasons. As a result of the correlation process between O_x and NO_x, it was concluded that the most important source of O_x concentrations in winter was NO_x and O₃ was in summer.     

Efficient removal of insecticide “imidacloprid” from water by electrochemical advanced oxidation processes

The oxidative degradation of imidacloprid (ICP) has been carried out by electrochemical advanced oxidation processes (EAOPs), anodic oxidation, and electro-Fenton, in which hydroxyl radicals are generated electrocatalytically. Carbon-felt cathode and platinum or boron-doped diamond (BDD) anodes were used in electrolysis cell. To determine optimum operating conditions, the effects of applied current and catalyst concentration were investigated. The decay of ICP during the oxidative degradation was well fitted to pseudo-first-order reaction kinetics and absolute rate constant of the oxidation of ICP by hydroxyl radicals was found to be k _abs(ICP)?=?1.23?×?10⁹ L mol^?1 s^?1. The results showed that both anodic oxidation and electro-Fenton process with BDD anode exhibited high mineralization efficiency reaching 91 and 94 % total organic carbon (TOC) removal at 2 h, respectively. For Pt-EF process, mineralization efficiency was also obtained as 71 %. The degradation products of ICP were identified and a plausible general oxidation mechanism was proposed. Some of the main reaction intermediates such as 6-chloronicotinic acid, 6-chloronicotinaldehyde, and 6-hydroxynicotinic acid were determined by GC-MS analysis. Before complete mineralization, formic, acetic, oxalic, and glyoxylic acids were identified as end-products. The initial chlorine and organic nitrogen present in ICP were found to be converted to inorganic anions Cl^?, NO₃ ^?, and NH₄ ⁺.     

An integrated methodology for the used product selection problem faced by third-party reverse logistics providers

The rise of electronic commerce and the stricter government regulations on the recovery of end-of-life products increased the number of products returned by customers. A company may deal with increasing product returns by developing its own reverse logistic system. However, high fixed costs associated with dedicated reverse logistics equipment and infrastructure force many companies to outsource their reverse logistics operations to third-party reverse logistics providers. One of the important problems faced by third-party reverse logistics providers is the selection of the types of used products to be collected. In this study, a four-phase used product selection methodology is proposed. First, the quantitative and qualitative selection criteria are determined. Then the weights of the criteria are calculated using fuzzy analytic hierarchy process. Next, simulation models are employed to determine the values of quantitative criteria. Finally, technique for order preference by similarity to ideal solution ranks alternative used product types. A numerical example is also provided in order to present the applicability of the proposed methodology.     

BMP estimation of landfilled municipal solid waste by multivariate statistical methods using specific waste parameters: case study of a sanitary landfill in Turkey

The main objective of this study was to determine whether methane potential of waste could be estimated more easily by a limited number of waste characterization variables. 36 samples were collected from 12 locations and 3 waste depths in order to represent almost all waste ages at the landfill. Actual remaining methane potential of all samples was determined by the biochemical methane potential (BMP) tests. The cumulative methane production of closed landfill (cLF) samples reached 75–125 mL at the end of experiment duration, while the samples from active landfill (aLF) produced in average 216–266 mL methane. The average experimental k and L ₀ values of cLF and aLF were determined by non-linear regression using BMP data with first-order kinetic equation as 0.0269 day^?1–30.38 mL/g dry MSW and 0.0125 day^?1–102.1 mL/g dry MSW, respectively. The principal component analysis (PCA) was applied to analyze the results for cLF and aLF along with BMP results. Three PCs for the data set were extracted explaining 72.34 % variability. The best MLR model for BMP prediction was determined for seven variables (pH–Cl–TKN–NH4–TOC–LOI–Ca). R ² and Adj. R ² values of this best model were determined as 80.4 and 75.3 %, respectively.     

Removal of 2, 4‐D from aqueous solution by the adsorbents from spent bleaching earth

Abstract

The removal of 2, 4‐D (2, 4‐ dichlorophenoxyacetic acid) from aqueous solutions by activated spent bleaching earths (SBE) was studied at 20 °C. Experiments were performed as a function of time, initial concentration, dose and particle size of the adsorbent. The Langmuir and Freundlich adsorption equations were fitted by the adsorption data obtained. The values of Langmuir and Freundlich constants were determined. The adsorption kinetic was found to follow Lagergren equation. Both the boundary layer and intraparticle diffusion played important roles in the adsorption rate of 2, 4‐D. As the size of the adsorbent increased, the time to reach equilibrium increased but adsorption capacity decreased.     

The occurrence and environmental effect of persistent organic pollutants (POPs) in Taurus Mountains soils

Purpose  

Persistent organic pollutants (POPs) are of global concern due to their ubiquitous presence and toxicity. The occurence of polychlorinated dibenzo-p-dioxins (PCDDs), -dibenzofurans (PCDFs), co-planar biphenyls (PCBs), hexachlorocyclohexanes (HCH), dichlorodiphenyltrichloroethanes (DDT), and organochlorine pesticides (OCPs) in forest soil collected from Taurus mountains may have adverse effects on the environment and health. The aim of the study was to investigate the outcome and distribution of POPs in the environment and the possible grasshopper effect along an altitude transect from sea level up to nearly 2,000 m a.s.l at a spatial distance of about 60 km in the southeastern Turkish Mediterranean Sea.     

Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.     

Valorization of spent coffee grounds recycling as a potential alternative fuel resource in Turkey: An experimental study

In this study, recycling of spent coffee grounds (SCG) as a potential feedstock for alternative fuel production and compounds of added value in Turkey was assessed. The average oil content was found (≈ 13% w/w). All samples (before and after extraction) were tested for scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), calorific value, surface analysis and porosity, Fourier transform infrared (FT-IR), and elemental analysis to assess their potential towards fuel properties. Elemental analysis indicated that carbon represents the highest percentages (49.59% and 46.42%, respectively), followed by nitrogen (16.7% and 15.5%), hydrogen (6.74% and 6.04%), and sulfur (0.851% and 0.561%). These results indicate that SCG can be utilized as compost, as it is rich in nitrogen. Properties of the extracted oil were examined, followed by biodiesel production. The quality of biodiesel was compared with American Society for Testing and Materials (ASTM) D6751 standards, and all the properties complied with standard specifications. The fatty acid compositions were analyzed by gas chromatography. It was observed that coffee waste methyl ester (CWME) is mainly composed of palmitic (35.8%) and arachidic (44.6%) acids, which are saturated fatty acids. The low degree of unsaturation provides an excellent oxidation stability (10.4 hr). CWME has also excellent cetane number, higher heating value, and iodine value with poor cold flow properties. The studies also investigated blending of biodiesel with Euro diesel and butanol. Following this, a remarkable improvement in cloud and pour points of biodiesel was obtained. Spent coffee grounds after oil extraction is an ideal material for garden fertilizer, feedstock for ethanol, biogas production, and as fuel pellets. The outcome of such research work produces valuable insights on the recycling importance of SCG in Turkey.

Implications: Coffee is a huge industry, and coffee has been widely used due to its refreshing properties. This industry generates large quantities of waste. Therefore, recycling of spent coffee grounds for producing alternative fuels and compounds of added value is crucial. Elemental analysis indicated that coffee waste can be utilized as compost, as it is rich in nitrogen. Coffee waste after oil extraction is an ideal feedstock for ethanol and biogas production, garden fertilizer, and as fuel pellets. The low degree of unsaturation provides excellent oxidation stability. Its biodiesel has also excellent cetane number, higher heating value, and lower iodine value.