Human mortality in Cyprus: the role of temperature and particulate air pollution

Climatic change results in increased occurrence of heat waves, and the thermal stress caused by such phenomena is leading to higher levels of heat-related mortality worldwide. This study is the first to examine the effect of extreme weather on mortality in Cyprus. It investigates the individual effect of meteorological indicators on mortality, as well as the role of particulate air pollution (PM₁₀). A generalized linear model (GLM) with quasi-Poisson regression was implemented. GLM included a temperature function and was adjusted for relative humidity and seasonality. The temperature function was developed under a newly developed framework of distributed lag nonlinear models, which capture nonlinearities and delayed effects of heat simultaneously. GLM was extended to examine the confounding effect of air pollution. All the results on heat effects are presented. High temperatures had a significant effect on mortality with increased mortality rates, independent of humidity and seasonality. Mortality risk increased steeply above a temperature threshold. A direct heat effect was shown, with higher risk on the current and next day of a severe heat event. PM₁₀ was not found to have a confounding effect on the temperature–mortality relationship, since the strength of this relationship remained after the inclusion of PM₁₀ in the model. Differences existed between urban and coastal areas.     

Occurrence and fate of heavy metals in the wastewater treatment process

The occurrence and the fate of heavy metals (Cd, Pb, Mn, Cu, Zn, Fe and Ni) during the wastewater treatment process were investigated in the wastewater treatment plant (WTP) of the city of Thessaloniki, northern Greece, operating in the activated sludge mode. For this purpose, wastewater and sludge samples were collected from six different points of the plant, namely, the influent (raw wastewater, RW), the effluent of the primary sedimentation tank (primary sedimentation effluent, PSE), the effluent of the secondary sedimentation tank (secondary sedimentation effluent, SSE), sludge from the primary sedimentation tank (primary sludge, PS), activated sludge from the recirculation stream (activated sludge, AS), and the digested/dewatered sludge (final sludge, FS).

The distribution of metals between the aqueous and the solid phase of wastewater was investigated. Good exponential correlation was found between the metal partition coefficient, logK_p, and the suspended solids concentration. The mass balance of heavy metals in the primary, secondary and the whole treatment process showed good closures for all metal species. The relative distribution of individual heavy metals in the treated effluent and the sludge streams indicated that Mn and Cu are primarily (>70%) accumulated in the sludge, while 47–63% of Cd, Cr, Pb, Fe, Ni and Zn remain in the treated effluent.     

Analysis of the biological cycle of Acartia clausi (Copepoda) in a meso-oligotrophic coastal area of the eastern Mediterranean Sea using time-series analysis

We evaluated the duration of Copepodite Stages C1 to C6, the biological cycle and the number of annual generations of the planktonic copepod Acartia clausi in a meso-oligotrophic area of the eastern Mediterranean Sea (Saronikos Gulf, Greece). The results were based on 95 zooplankton samples collected during the period November 1988 through June 1990, at intervals of 1, 2, 7 and 15 d, the sampling intervals being dependent on the abundance of A. clausi. Time-series analysis (cross-correlation) of fluctuations in the comparative abundance (percentages) of the copepodite stages present was used to determine the duration of the development stages and generation length. This methodology could significantly contribute to the identification of cohorts, and hence to the estimation of stage duration, from field data for a given copepod species. The development of A. clausi stages was not isochronal; duration of the first copepodite stage was shorter than that of the last three stages. The mean generation length estimated (28.6 d) is among the highest recorded in the literature for A. clausi at the range of temperatures prevailing in the area (13 to 25°C). Throughout the year there were four or five generations. The possible limiting role of food availability on the duration of each stage and hence on generation length is also discussed.     

Trophodynamic function of copepods,appendicularians and protozooplankton in the late summer zooplankton community in the Skagerrak

The study was carried out in the Skagerrak during late summer when population development in the pelagic cycle culminated in the yearly maximum in zooplankton biomass. The cyclonic circulation of surface water masses created the characteristic dome-shaped pycnocline across the Skagerrak. The large dinoflagellate Ceratium furca dominated the phytoplankton biomass. Ciliates and heterotrophic dinoflagellates were the major grazers and, potentially, consumed 43–166% of daily primary production. The grazing impact of copepods was estimated from specific egg production rates and grazing experiments. The degree of herbivory differed between species (14–85%), but coprophagy (e.g. feeding on fecal pellets) and ingestion of microzooplankton were also important. The appendicularian Oikopleura dioica was present in lower numbers than copepods, but cleared a large volume of water. The grazing impact of copepods and O. dioica was estimated to 57±24% and 12±12% of daily primary production, respectively. Sedimentation of organic material (30 m) varied between 169 and 708 mg C m^–2 day^–1, and the contribution from the mesozooplankton (copepod fecal pellets and mucus houses with attached phytodetritus of O. dioica) was 5–33% of this sedimentation. Recycling of fecal pellets and mucus houses in the euphotic zone was 59% and 36%, respectively. However, there was a high respiration of organic material by microorganisms in the mid-water column, and 34% of the sedimenting material actually reached the benthic community in the deep, central part of the Skagerrak.     

Determination of thorium, uranium and potassium elemental concentrations in surface soils in Cyprus

A comprehensive study was conducted to determine thorium, uranium and potassium elemental concentrations in surface soils throughout the accessible area of Cyprus using high-resolution gamma-ray spectrometry. A total of 115 soil samples was collected from all over the bedrock surface of the island based on the different lithological units of the study area. The soil samples were air-dried, sieved through a fine mesh, sealed in 1000-ml plastic Marinelli beakers, and measured in the laboratory in terms of their gamma radioactivity for a counting time of 18 h each. From the measured gamma-ray spectra, elemental concentrations were determined for thorium (range from 2.5 x 10(-3) to 9.8 microg g(-1)), uranium (from 8.1 x 10(-4) to 3.2 microg g(-1)) and potassium (from 1.3 x 10(-4) to 1.9%). The arithmetic mean values (A.M. +/- S.D.) calculated from all samples are: (1.2+/-1.7 microg g(-1)), (0.6+/-0.7) microg g(-1), and (0.4+/-0.3%), for thorium, uranium and potassium, respectively, which are by a factor of three-six lower than the world average values of 7.4 microg g(-1) (Th), 2.8 microg g(-1) (U) and 1.3% (K) derived from all data available worldwide. The best-fitting relation between the concentrations of Th and K versus U and also of K versus Th, is essentially of linear type with a correlation coefficient of 0.93, 0.84 and 0.90, respectively. The Th/U, K/U and K/Th ratios (slopes) extracted are equal to 2.0, 2.8 x 10(3) and 1.4 x 10(3), respectively.     

Gamma radiation measurements and dose rates in commercially-used natural tiling rocks (granites)

The gamma radiation in samples of a variety of natural tiling rocks (granites) imported in Cyprus for use in the building industry was measured, employing high-resolution gamma-ray spectroscopy. The rock samples were pulverised, sealed in 1-l plastic Marinelli beakers, and measured in the laboratory with an accumulating time between 10 and 14 h each. From the measured gamma-ray spectra, activity concentrations were determined for (232)Th (range from 1 to 906 Bq kg(-1)), (238)U (from 1 to 588 Bq kg(-1)) and (40)K (from 50 to 1606 Bq kg(-1)). The total absorbed dose rates in air calculated from the concentrations of the three radionuclides ranged from 7 to 1209 nGy h(-1) for full utilization of the materials, from 4 to 605 nGy h(-1) for half utilization and from 2 to 302 nGy h(-1) for one quarter utilization. The total effective dose rates per person indoors were determined to be between 0.02 and 2.97 mSv y(-1) for half utilization of the materials. Applying dose criteria recently recommended by the EU for superficial materials, 25 of the samples meet the exemption dose limit of 0.3 mSv y(-1), two of them meet the upper dose limit of 1 mSv y(-1) and only one clearly exceeds this limit.