A new structure-affinity relationship for TCDD receptor binding

We have investigated the capacity of various indoles to inhibit specific binding of [1,6-³H]2,3,7,8-tetrachlorodibenzo- -dioxin ([³H]TCDD) in rat liver cytosol, as analyzed by electrofocusing in polyacrylamide gels. Of these indoles, indolo[3,2- ]carbazole was the most active. The IC₅₀ value for TCDD receptor binding of indolo[3,2- ]carbazole as well as for 2,3,7,8-tetrachlorodibenzofuran was 3.6 nM. We have also studied the influence on binding exerted by introduction of some substituents on indolo[3,2- ]carbazole. Substitution with methyl groups at the 5 and 11 positions resulted in an increased affinity (IC₅₀ 1.2 nM) for the TCDD receptor as compared to the parent compound. Computer-supported molecular structure studies indicated that if the van der Waals radii of atoms are included, a rectangle of 6.8 × 13.7 Å may account for the binding of high-affinity ligands to the TCDD receptor.     

Biodegradation of 4-nonylphenol in seawater and sediment

Biodegradation of 14C-labelled nonylphenol at the concentration 11 microg litre (-1) in seawater has been estimated by collection and quantification of the formed labelled carbon dioxide. Initially degradation was very slow but when the microorganisms had become adapted, after four weeks at 11 degrees C, the degradation rate increased rapidly and after 58 days about 50% of 14C from NP was found in the CO2 fraction. In the presence of sediment the initial degradation rate was high and did not increase after longer incubation. Lack of oxygen reduced the degradation rate by half in the presence of sediment.     

Alcohol problems among Swedish drunk drivers: differences related to mode of detection and geographical region

OBJECTIVE: To investigate the prevalence of alcohol problems in a representative sample of Swedish drivers suspected of drunk driving in comparison with control drivers and the general Swedish population in relation to mode and time of detection. Is the time of day or night or the detection mode important for the prevalence of alcohol problems and which are the best predictors for identifying alcohol problems among DUI offenders? METHODS: Two thousand and one hundred drivers (169 females) suspected of DUI offence during 1997-2001 who agreed to respond to the AUDIT questionnaire (Alcohol Use Disorders Identification Test) and 785 control drivers (266 females) not suspected of DUI recruited at general traffic controls were investigated. RESULTS: Both mode and time of detection were found to be important. The greatest impact on the prevalence of alcohol problems emanated from the predictors in the following order: high BAC; unlicensed driving; detection hours between 12.00 and 18.00, and age under 26 years. Age over 55 years and detection in general traffic controls were the two strongest factors negatively correlated to alcohol problems prevalence. The differences between regions with regard to alcohol problems incidence could only partly be explained by police routines and resources. CONCLUSIONS: Mode and time of detection affect the prevalence of DUI offenders with alcohol problems, and to a lesser degree also BAC level. Both the detection mode and the time of detection are significant for the proportion of identified DUIs with alcohol problems. Because the majority of committed DUI offenses are never identified, it is important to optimize the detection strategies of the police with the purpose of minimizing public damage and expenses.     

Sodium borohydride reduction of individual polybrominated diphenyl ethers

Many chemicals in use today lack appropriate documentation on their environmental properties, fate, and effects. To counteract this lack of documentation it is vital to thoroughly investigate a compound’s fate in the environment before it comes into use. The present study is describing a novel method for assessing the reduction potential of polybrominated diphenyl ethers (PBDEs), as a part of a project aimed to create an experimental model for determination of chemical persistence. The reductive transformation of 15 PBDE congeners using sodium borohydride was determined. Pseudo-first-order reaction rate constants of the transformations were determined by monitoring the disappearance of the investigated congeners. The reductions lead primarily to formation of lower brominated PBDEs. Each PBDE congener was tested in a total of ten replicates which showed a relative standard deviation of 31% or less. The decaBDE, BDE-209 was approximately 3 times as prone to reductive transformation as BDE-207. The three nonaBDEs, BDE-206, BDE-207, and BDE-208, showed similar reductive potential. The reactivity of the tested octaBDEs was quite variable, from 5% to 24% of the reactivity of BDE-209 for BDE-196 and BDE-198, respectively. The heptaBDEs studied were in the range of the less reactive octaBDEs, except for BDE-181 which was as high as 13% of the reactivity of BDE-209. The results presented give a method for measuring the propensity of PBDEs, and possibly similar compounds, to undergo reductions. They indicate a potential route to a vital piece of information in the assessment of environmental persistence of chemicals.     

A standardized method for assessment of oxidative transformations of brominated phenols in water

The term persistence has been used to confusion since it is used as a conceptual parameter without a uniform definition. Work is therefore being done in order to unite ideas and describe persistence based on the chemical reactivity and chemico-physical properties of compounds via investigation of the main degradation pathways in the environment; photolysis, hydrolysis-substitution-elimination (hse), oxidation, reduction and radical reactions. The present work is focused on developing a method to determine oxidative degradation rates of chemicals and thereby measurement of their susceptibility to undergo oxidation reactions. The method based on potassium permanganate works well for water soluble compounds and is easy, robust, inexpensive and reproducible. By using the method and varying the analysed substances, the degradation rates for brominated phenols, two chlorinated phenols and high volume production compounds such as tetrabromobisphenol A (TBBPA), tetrachlorobisphenol A (TCBPA) and bisphenol A (BPA) have been determined at pH 7.6+/-0.2. The reaction rates of the two halogenated BPA's are particularly fast, giving half-lives in seconds. The other test compounds have slower reaction rates but easily measured under the reaction conditions applied. The reactions are temperature dependent. There is evidence that pK(a) and the substitution pattern of the halogens affects the rate of the reactions. The method is robust and applicable for reaction rate constant measurements of present and potential future environmental contaminants.     

An overview of commercially used brominated flame retardants,their applications,their use patterns in different countries/regions and possible modes of release

Brominated flame retardants (BFRs) are used in a variety of consumer products and several of those are produced in large quantities. These compounds have been detected in environmental samples, which can be attributed to the anthropogenic uses of these compounds. Brominated flame retardants are produced via direct bromination of organic molecules or via addition of bromine to alkenes; hence, an overview of the production and usage of bromine over the past three decades is covered. Production, application, and environmental occurrence of high production brominated flame retardants including Tetrabromobisphenol A, polybrominated biphenyls, Penta-, Octa-, Deca-brominated diphenyl ether (oxide) formulation and hexabromocyclododecane are discussed.     

Placental transfer of polychlorinated biphenyls, their hydroxylated metabolites and pentachlorophenol in pregnant women from eastern Slovakia

The aim of the present study was to understand the placental transfer of polychlorinated biphenyls (PCBs), specific hydroxylated PCB metabolites (OH-PCBs), and pentachlorophenol (PCP) in blood serum, in a birth cohort from eastern Slovakia. During the period 2002-2004, cord blood specimens were collected in parallel with maternal specimens from women delivering in the two eastern Slovak districts of Michalovce and Svidnik/Stropkov. A total of 92 pairs of mother-cord specimens at delivery were selected for this study. 4-OH-CB107, 3-OH-CB153, 4-OH-CB146, 3'-OH-CB138, 4-OH-CB187, and 4'-OH-CB172 were quantified. The median concentrations of Sigma(17)PCBs, Sigma(6)OH-PCBs, and PCP in cord serum were 0.92, 0.33, and 0.69 ng/g wet wt., respectively and highly correlated with the corresponding maternal serum levels (correlations were R(2)=0.61, 0.78, and 0.82, respectively). The median cord to mother ratios of the Sigma(17)PCBs, Sigma(6)OH-PCBs, and PCP were 0.18, 0.75, and 1.10, respectively. The median ratio of the Sigma(6)OH-PCBs to the Sigma(17) PCBs in the cord serum was 0.38 from wet weight based concentrations, which was about four times higher than the ratio of these compounds in maternal serum (0.09). PCP was more abundant than any PCB or OH-PCB congener measured in cord serum. The higher cord to maternal ratios of OH-PCB metabolites as compared with the parent compounds suggests either a higher placental transfer rate or greater metabolism in the fetus as compared with the maternal compartment. These findings are consistent with their preferential binding to TTR that can cross the placenta. The cord to maternal ratio varies by congener (e.g., 4-OH-CB107=0.58, 4-OH-CB146=0.74, 3'-OH-CB138=1.01).     

Long-term dynamic of forest vegetation after reduction of copper smelter emissions

The state of tree and ground vegetation layers in spruce-fir forests around the Middle Ural Copper Smelter (Revda, Sverdlovsk oblast) has been repeatedly evaluated in 25 permanent sampling plots at 5- to 10-year intervals (1989–2013). The results have been used to characterize the dynamics of plant communities in the period of reduction of emissions from the smelter. Although the annual amount of emissions has decreased from 150–225 × 10³ t in the 1980s to less than 5 × 10³ t after 2010, the vegetation in the impact zone (1 and 2 km from the smelter) remains severely suppressed: the trees continue to die off, and the diversity of ground vegetation layer is very low. In zones with low and moderate levels of industrial pollution (30 and 4–7 km from the smelter), natural factors associated with windfall disturbance after the 1995 windstorm with snow have played a more important role in the dynamics of forest communities than the reduction of emissions itself.     

Evidence-Based Knowledge Versus Negotiated Indicators for Assessment of Ecological Sustainability: The Swedish Forest Stewardship Council Standard as a Case Study

Assessing ecological sustainability involves monitoring of indicators and comparison of their states with performance targets that are deemed sustainable. First, a normative model was developed centered on evidence-based knowledge about (a) forest composition, structure, and function at multiple scales, and (b) performance targets derived by quantifying the habitat amount in naturally dynamic forests, and as required for presence of populations of specialized focal species. Second, we compared the Forest Stewardship Council (FSC) certification standards’ ecological indicators from 1998 and 2010 in Sweden to the normative model using a Specific, Measurable, Accurate, Realistic, and Timebound (SMART) indicator approach. Indicator variables and targets for riparian and aquatic ecosystems were clearly under-represented compared to terrestrial ones. FSC’s ecological indicators expanded over time from composition and structure towards function, and from finer to coarser spatial scales. However, SMART indicators were few. Moreover, they poorly reflected quantitative evidence-based knowledge, a consequence of the fact that forest certification mirrors the outcome of a complex social negotiation process.     

Application of a Life Cycle Simulation Model to Evaluate Impacts of Water Management and Conservation Actions on an Endangered Population of Chinook Salmon

Fisheries and water resource managers are challenged to maintain stable or increasing populations of Chinook salmon in the face of increasing demand on the water resources and habitats that salmon depend on to complete their life cycle. Alternative management plans are often selected using professional opinion or piecemeal observations in place of integrated quantitative information that could reduce uncertainty in the effects of management plans on population dynamics. We developed a stochastic life cycle simulation model for an endangered population of winter-run Chinook salmon in the Sacramento River, California, USA with the goal of providing managers a tool for more effective decision making and demonstrating the utility of life cycle models for resource management. Sensitivity analysis revealed that the input parameters that influenced variation in salmon escapement were dependent on which age class was examined and their interactions with other inputs (egg mortality, Delta survival, ocean survival). Certain parameters (river migration survival, harvest) that were hypothesized to be important drivers of population dynamics were not identified in sensitivity analysis; however, there was a large amount of uncertainty in the value of these inputs and their error distributions. Thus, the model also was useful in identifying future research directions. Simulation of variation in environmental inputs indicated that escapement was significantly influenced by a 10% change in temperature whereas larger changes in other inputs would be required to influence escapement. The model presented provides an effective demonstration of the utility of life cycle simulation models for decision making and provides fisheries and water managers in the Sacramento system with a quantitative tool to compare the impact of different resource use scenarios.