Education and advice contribute to increased density of broadleaved conservation trees, but not saplings, in young forest in Sweden

The effectiveness of different conservation policies is debated, but the policies are rarely evaluated quantitatively. A voluntary or 'soft' policy based mainly on education provides information about ecosystems and effects of land use, to encourage conservation action. Swedish forestry relies mainly on soft policy, with substantial resources for education and advice to more than 200,000 forest owners, while legal regulation is weak. Increased retention of broadleaved trees at clear-cutting, with environmental benefits in the conifer-dominated forestry, is important in the policy. We used the Swedish National Forest Inventory to analyse this policy for young forests in southern Sweden. Between 1983-1987 and 1998-2002 the policy had no positive effect on saplings (1.3m tall to 4.9 cm dbh) of birch, oak, beech and other species that mostly decreased in density, due to planting of conifers and browsing by ungulates. However, broadleaved conservation trees (>or=15 cm dbh) increased in density, e.g. to about one oak and six birches per ha in young coniferous forest in 1998-2002. The relative increase in density was higher for large (>or=20 cm dbh) than for small trees (15-20 cm dbh). The density of conservation trees was higher on forestland of high than of low productivity. Thus, the soft conservation policy did not influence regeneration of saplings in this type of forestry system, but large broadleaved trees were increasingly saved at 'clear-cuttings'. Advice and educational programmes probably contributed to this result. A continued increase in conservation trees at harvest may require economical support to forest owners.     

The global impact of ozone on agricultural crop yields under current and future air quality legislation

In this paper we evaluate the global impact of surface ozone on four types of agricultural crop. The study is based on modelled global hourly ozone fields for the year 2000 and 2030, using the global 1°×1° 2-way nested atmospheric chemical transport model (TM5). Projections for the year 2030 are based on the relatively optimistic “current legislation (CLE) scenario”, i.e. assuming that currently approved air quality legislation will be fully implemented by the year 2030, without a further development of new abatement policies. For both runs, the relative yield loss due to ozone damage is evaluated based on two different indices (accumulated concentration above a 40 ppbV threshold and seasonal mean daytime ozone concentration respectively) on a global, regional and national scale. The cumulative metric appears to be far less robust than the seasonal mean, while the seasonal mean shows satisfactory agreement with measurements in Europe, the US, China and Southern India and South-East Asia.Present day global relative yield losses are estimated to range between 7% and 12% for wheat, between 6% and 16% for soybean, between 3% and 4% for rice, and between 3% and 5% for maize (range resulting from different metrics used). Taking into account possible biases in our assessment, introduced through the global application of “western” crop exposure–response functions, and through model performance in reproducing ozone-exposure metrics, our estimates may be considered as being conservative.Under the 2030 CLE scenario, the global situation is expected to deteriorate mainly for wheat (additional 2–6% loss globally) and rice (additional 1–2% loss globally). India, for which no mitigation measures have been assumed by 2030, accounts for 50% of these global increase in crop yield loss. On a regional-scale, significant reductions in crop losses by CLE-2030 are only predicted in Europe (soybean) and China (wheat).Translating these assumed yield losses into total global economic damage for the four crops considered, using world market prices for the year 2000, we estimate an economic loss in the range $14–$26 billion. About 40% of this damage is occurring in China and India. Considering the recent upward trends in food prices, the ozone-induced damage to crops is expected to offset a significant portion of the GDP growth rate, especially in countries with an economy based on agricultural production.     

Polybrominated diphenyl ether (PBDE) levels in dust from previously owned automobiles at United States dealerships

The levels of BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 were determined in the dust sampled from 60 automobiles that were available for resale at U.S. dealerships. The dominant congener in automobile dust was BDE-209 comprising 95% of the total PBDE levels with a median level of 48.1 µg g^? 1. Statistical analysis of the vehicle attributes indicates that the BDE-209 levels are different (p < 0.05) with respect to groupings by vehicle model year, vehicle manufacturer, and the country of manufacture. Vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE formulation. While DecaBDE use is banned in Maine and Washington and is targeted for restriction in the near future by six U.S. states, vehicles and airplanes are exempt from the ban. It is anticipated that the human exposure potential to PBDEs from automobile dust ingestion will continue for an indefinite future period in the U.S. population.     

Simultaneous analysis of free and sulfo-conjugated steroid estrogens in artificial urine solution and agricultural soils by high-performance liquid chromatography

A simple and robust analytical method was developed to simultaneously detect and quantify 17β-estradiol (E2), estrone (E1), 17β-estradiol-3-sulphate (E2-3S), and estrone-3-sulphate (E1-3S) in aqueous solutions (calcium chloride and artificial urine solutions) and agricultural soils using high performance liquid chromatography and UV detection. The standards for all four compounds were linear in the range of 0.01 to 1.0 μg mL(-1) (n = 6) and 1.0 to 20 μg mL(-1) (n = 6), respectively, with correlation coefficients > 0.999. The on-column limits of detection at an injection volume of 50 μL and S/N (signal: noise) ratio of 3 were: 9.0 ng mL(-1), 10 ng mL(-1), 5.0 ng mL(-1), and 7.0 ng mL(-1) for E2-3S, E1-3S, E2 and E1, respectively. The limit of detection and quantification in artificial urine solution and CaCl(2) solution was 1.0 ng mL(-1) for all four compounds. Method detection limits for the compounds in the 3 soils ranged from 2 to 2.4 ng g(-1) (E2-3S and E1-3S), and 1.0 to 2.9 ng g(-1) (E2 and E1), respectively.     

Effects of nano-TiO(2) in combination with ambient UV-irradiation on a leaf shredding amphipod

Production and use of engineered nanoparticles, such as titanium dioxide nanoparticles (nTiO₂), is increasing worldwide, enhancing their probability to enter aquatic environments. However, direct effects of nTiO₂ as well as ecotoxicological consequences due to the interactions of nTiO₂ with environmental factors like ultraviolet (UV) irradiation on representatives of detrital food webs have not been assessed so far. Hence, the present study displayed for the first time adverse sublethal effects of nTiO₂ at concentrations as low as 0.2 mg L⁻¹ on the leaf shredding amphipod Gammarus fossarum both in presence and absence of ambient UV-irradiation following a 7-d exposure. In absence of UV-irradiation, however, the effects seemed to be driven by accumulation of nTiO₂ at the bottom of the test vessels to which the gammarids were potentially exposed. The adverse sublethal and lethal effects on gammarids caused by the combined application of nTiO₂ and ambient UV-irradiation are suggested to be driven by the formation of reactive oxygen species. In conclusion, both the accumulation of nTiO₂ at the bottom of the test vessel and the UV induced formation of reactive oxygen species clearly affected its ecotoxicity, which is recommended for consideration in the environmental risk assessment of nanoparticles.     

Formation of a ternary neptunyl(V) biscarbonato inner-sphere sorption complex inhibits calcite growth rate

Neptunyl, Np(V)O(2)(+), along with the other actinyl ions U(VI)O(2)(2+) and Pu(V,VI)O(2)((+,2+)), is considered to be highly mobile in the geosphere, while interaction with mineral surfaces (inner- or outer-sphere adsorption, ion-exchange, and coprecipitation/structural incorporation) may retard its migration. Detailed information about the exact interaction mechanisms including the structure and stoichiometry of the adsorption complexes is crucial to predict the retention behavior in diverse geochemical environments. Here, we investigated the structure of the neptunyl adsorption complex at the calcite-water interface at pH 8.3 in equilibrium with air by means of low-temperature (15K) EXAFS spectroscopy at the Np-L(III) edge. The coordination environment of neptunyl consists of two axial oxygen atoms at 1.87(±0.01)?, and an equatorial oxygen shell of six atoms at 2.51(±0.01)?. Two oxygen backscatterers at 3.50(±0.04)? along with calcium backscatterers at 3.95(±0.03)? suggest that neptunyl is linked to the calcite surface through two monodentate bonds towards carbonate groups of the calcite surface. Two additional carbon backscatterers at 2.94(±0.02)? are attributed to two carbonate ions in bidentate coordination. This structural environment is conclusively interpreted as a ternary surface complex, where a neptunyl biscarbonato complex sorbs through two monodentate carbonate bonds to steps at the calcite (104) face, while the two bidentately coordinated carbonate groups point away from the surface. This structural information is further supported by Mixed Flow Reactor (MFR) experiments. They show a significant decrease of the calcite growth rate in the presence of neptunyl(V), in line with blockage of the most active crystal growth sites, step and kink sites, by adsorption of neptunyl. Formation of this sorption complex constitutes an important retention mechanism for neptunyl in calcite-rich environments.     

Applying Zonation Methods and Tabu Search to Improve the Ground‐Water Modeling1

Abstract: An optimization procedure combining zonation methods with the Tabu Search method is proposed to identify the spatial distribution of hydraulic conductivity field. Three zonation methods, Voronoi diagram (VD), multiplicatively weighted Voronoi diagram (MWVD), and pattern zonation are adopted for the parameterization purposes. With the consideration of the homogeneity and the heterogeneity, there are four spatial distributions of hydraulic conductivity designed to test whether the parameter structure can be successfully identified. The fitting residual error is first considered to determine an adequate number of zones without over parameterization. Then, the parameter uncertainty is evaluated the decision of the number of zones. The results indicate that the MWVD performs better than other two methods because the MWVD has better flexibility in describing the zonal boundaries with small number of decision variables.     

Toxicity assessment of collected fractions from an extracted naphthenic acid mixture

Recent expansion within the oil sands industry of the Athabasca Basin of Alberta, Canada has led to increased concern regarding process-affected wastewaters produced during bitumen extraction. Naphthenic acids (NAs) have been identified as the primary toxic constituents of oil sands process-affected waters (OSPW) and studies have shown that with time, microbial degradation of lower molecular weight NAs has led to a decrease in observed toxicity. As earlier studies identified the need for an "unequivocal demonstration" of lower molecular weight NAs being the primary contributors to mixture toxicity, a study was initiated to fractionate an extracted NA mixture by molecular weight and to assess each fraction's toxicity. Successful molecular weight fractionation of a methylated NA mixture was achieved using a Kugelrohr distillation apparatus, in which fractions collected at higher boiling points contained NAs with greater total carbon content as well as greater degree of cyclicity. Assays with Vibrio fischeri bioluminescence (via Microtox assay) revealed that the lowest molecular weight NAs collected had higher potency (EC50: 41.9+/-2.8 mg l(-1)) than the highest molecular weight NAs collected (EC50: 64.9+/-7.4 mg l(-1)). Although these results support field observations of microbial degradation of low molecular weight NAs decreasing OSPW toxicity, it is not clear why larger NAs, given their greater hydrophobicity, would be less toxic.     

Neptunium(V) adsorption to calcite

The migration behavior of the actinyl ions U(VI)O₂²⁺, Np(V)O₂⁺ and Pu(V,VI)O₂^(+,2+) in the geosphere is to a large extend controlled by sorption reactions (inner- or outer-sphere adsorption, ion-exchange, coprecipitation/structural incorporation) with minerals. Here NpO₂⁺ adsorption onto calcite is studied in batch type experiments over a wide range of pH (6.0–9.4) and concentration (0.4 μM–40 μM) conditions. pH is adjusted by variation of CO₂ partial pressure. Adsorption is found to be pH dependent with maximal adsorption at pH 8.3 decreasing with increasing and decreasing pH. pH dependence of adsorption decreases with increasing Np(V) concentration. EXAFS data of neptunyl adsorbed to calcite and neptunyl in the supernatant shows differences in the Np(V)-O-yl distance, 1.85 ± 0.01 Å for the adsorbed and 1.82 ± 0.01 Å for the solution species. The equatorial environment of the neptunyl in solution shows about 5 oxygen neighbours at 2.45 ± 0.02 Å. For adsorbed neptunyl there are also about 5 oxygen neighbours at 2.46 ± 0.01 Å. An additional feature in the adsorbed species' R-space spectrum can be related to carbonate neighbours, 3 to 6 carbon backscatterers (C-eq) at 3.05 ± 0.03 Å and 3 to 6 oxygen backscatterers (O-eq2) at 3.31 ± 0.02 Å. The differences in the Np(V)-O-yl distance and the C-eq and O-eq2 backscatterers which are only present for the adsorbed species indicate inner-sphere bonding of the adsorbed neptunyl species to the calcite surface. Experiments on adsorption kinetics indicate that after a fast surface adsorption process a continuous slow uptake occurs which may be explained by incorporation via surface dissolution and reprecipitation processes. This is also indicated by the part irreversibility of the adsorption as shown by increased K_D values after desorption compared to adsorption.