Catalase and ascorbate peroxidase—representative H<Subscript>2</Subscript>O<Subscript>2</Subscript>-detoxifying heme enzymes in plants

Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H₂O₂) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H₂O₂ and utilizes ascorbate (AsA) as specific electron donor for the reduction of H₂O₂ into H₂O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H₂O₂-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants; (c) to summarize the principles of current technologies used to assay CAT and APX in plants; (d) to appraise available literature on the modulation of CAT and APX in plants under major abiotic stresses; and finally, (e) to consider a brief cross-talk on the CAT and APX, and this also highlights the aspects unexplored so far.     

Chest deflections and injuries in oblique lateral impacts

A majority of laboratory-driven side-impact injury assessments are conducted using postmortem human subjects (PMHS) under the pure lateral mode. Because real-world injuries occur under pure and oblique modes, this study was designed to determine chest deflections and injuries using PMHS under the latter mode. Anthropometrical data were obtained and x-rays were taken. Specimens were seated on a sled and lateral impact acceleration corresponding to a change in velocity of 24 km/h was applied such that the vector was at an angle of 20 or 30 degrees. Chestbands were fixed at the level of the axilla (upper), xyphoid process (middle), and tenth rib (lower) location. Deflection contours as a function of time at the levels of the axilla and mid-sternum, representing the thorax, and at the tenth rib level, representing the abdomen, were evaluated for peak magnitudes. All data were normalized using mass-scaling procedures. Injuries were identified following the test at autopsy. Trauma graded according to the Abbreviated Injury Score, 1990 version, indicated primarily unilateral rib fractures and soft tissue abnormalities such as lung contusion and diaphragm laceration occurred. Mean peak deflections at the upper, middle, and lower levels of the chest for the 30-degree tests were 96.2, 78.5, and 76.8 mm. For the 20-degree tests, these magnitudes were 77.5, 89.9, and 73.6 mm. Statistical analysis indicated no significant (p > 0.05) differences in peak chest deflections at all levels between the two obliquities although the metric was significantly greater in oblique than pure lateral impacts at the mid and lower thoracic levels. These response data are valuable in oblique lateral impact assessments.     

Dynamism of household carbon emissions (HCEs) from rural and urban regions of northern and southern China

China contributes 23 % of global carbon emissions, of which 26 % originate from the household sector. Due to vast variations in both climatic conditions and the affordability and accessibility of fuels, household carbon emissions (HCEs) differ significantly across China. This study compares HCEs (per person) from urban and rural regions in northern China with their counterparts in southern China. Annual macroeconomic data for the study period 2005 to 2012 were obtained from Chinese government sources, whereas the direct HCEs for different types of fossil fuels were obtained using the IPCC reference approach, and indirect HCEs were calculated by input-output analysis. Results suggest that HCEs from urban areas are higher than those from rural areas. Regardless of the regions, there is a similarity in per person HCEs in urban areas, but the rural areas of northern China had significantly higher HCEs than those from southern China. The reasons for the similarity between urban areas and differences between rural areas and the percentage share of direct and indirect HCEs from different sources are discussed. Similarly, the reasons and solutions to why decarbonising policies are working in urban areas but not in rural areas are discussed.

     

Pretreatment of banana agricultural waste for bio-ethanol production: Individual and interactive effects of acid and alkali pretreatments with autoclaving,microwave heating and ultrasonication

Banana agricultural waste is one of the potential lignocellulosic substrates which are mostly un-utilized but sufficiently available in many parts of the world. In the present study, suitability of banana waste for biofuel production with respect to pretreatment and reducing sugar yield was assessed. The effectiveness of both acid and alkali pretreatments along with autoclaving, microwave heating and ultrasonication on different morphological parts of banana (BMPs) was studied. The data were statistically analyzed using ANOVA and numerical point prediction tool of MINITAB RELEASE 14. Accordingly, the optimum cumulative conditions for maximum recovery of reducing sugar through acid pretreatment are: leaf (LF) as the substrate with 25 min of reaction time and 180 °C of reaction temperature using microwave. Whereas, the optimum conditions for alkaline pretreatments are: pith (PH) as the substrate with 51 min of reaction time and 50 °C of reaction temperature using ultrasonication (US).     

Remediation technologies for heavy metal contaminated groundwater

The contamination of groundwater by heavy metal, originating either from natural soil sources or from anthropogenic sources is a matter of utmost concern to the public health. Remediation of contaminated groundwater is of highest priority since billions of people all over the world use it for drinking purpose. In this paper, thirty five approaches for groundwater treatment have been reviewed and classified under three large categories viz chemical, biochemical/biological/biosorption and physico-chemical treatment processes. Comparison tables have been provided at the end of each process for a better understanding of each category. Selection of a suitable technology for contamination remediation at a particular site is one of the most challenging job due to extremely complex soil chemistry and aquifer characteristics and no thumb-rule can be suggested regarding this issue. In the past decade, iron based technologies, microbial remediation, biological sulphate reduction and various adsorbents played versatile and efficient remediation roles. Keeping the sustainability issues and environmental ethics in mind, the technologies encompassing natural chemistry, bioremediation and biosorption are recommended to be adopted in appropriate cases. In many places, two or more techniques can work synergistically for better results. Processes such as chelate extraction and chemical soil washings are advisable only for recovery of valuable metals in highly contaminated industrial sites depending on economical feasibility.     

A review on efficient electromagnetic interference shielding materials by recycling waste—a trio of land to lab to land concept

Environmental Science and Pollution Research - The materials used in electrical and electronic applications have great importance and broader applications, but they have severe electromagnetic...     

Biomechanics of Pediatric Cervical Spine: Compression,Flexion and Extension Responses

The objective of the present study was to develop three separate age-specific one, three, and six year old pediatric human cervical spine (C4-CS-C6) three-dimensional nonlinear finite element models and to quantify the biomechanical responses. The adult model was modified to create one, three, and six year old pediatric spines by incorporating the local geometrical and material characteristics of the developmental anatomy. The adult human cervical spine model was constructed from close-up computed tomography sections and sequential anatomic cryomicrotome sections, and validated with experimental data. The biomechanical responses were compared with the adult human cervical spine behavior under different loading modes using three approaches. Approach 1: using pure overall structural scaling (reduce size) of the adult model. Approach 2: using three separate age-specific pediatric models incorporating local component geometrical and material property changes. Approach 3: applying the overall structural scaling to the above three pediatric models. All pediatric structures were consistently more flexible than the adult spine under all loading modes. However, responses obtained using the pure overall structural scaling (Approach 1) increased the flexibilities slightly. In contrast, the inclusion of local component geometrical and material property changes to create the three individual pediatric cervical spine models (Approach 2) produced significantly higher changes in the flexibilities under all loading modes. When overall structural scaling effects were added to the three pediatric models (Approach 3), the increase was not considerably higher. White the one year old pediatric model was the most flexible followed by the three and six year old models in flexion and extension, the three year old pediatric model was the most flexible under compression followed by the six and one year old models. The differing biomechanical responses among different pediatric groups were ascribed to the individual developmental anatomical features. The present findings of significant increase in biomechanical response due to local geometry and material property changes emphasize the need to consider the developmental anatomical features in the pediatric structures to better predict their biomechanical behavior.     

Changes in lipid profiles of liver microsomes of rats following intratracheal administration of DDT or endosulfan

The effect of intratracheal administration of DDT (5 mg/100 g body weight) or endosulfan (1 mg/100 g body weight) to rats for three consecutive days, has been studied on liver lipid metabolism. The administration of DDT but not endosulfan significantly increased the liver weight and the microsomal protein contents. Both DDT and endosulfan treatments significantly increased the contents of microsomal phosphatidylcholine (PC), total-free- and esterified cholesterol. The distribution of unsaturated fatty acids of microsomal PC and PE was increased by DDT treatment. The intratracheal administration of DDT caused fatty infiltration of liver which was probably due to increased synthesis of triglycerides (TG). This is supported by the increased incorporation of radioactive palmitate-1-14C into microsomal TG. However, the increased incorporation of palmitate-1-14C into microsomal PC and phosphatidylethanolamine (PE) after the DDT treatment, was due to the increased transacylation reaction supported by the decreased activity of microsomal phospholipase A. The intratracheal administration of endosulfan did not have pronounced effect on liver fatty infiltration, or transacylation reaction in microsomal PC and PE. However, the results have shown that the treatments of DDT or endosulfan increased the PC contents and the incorporation of radioactive [methyl-3H]choline into PC of microsomes, resulting the increased synthesis of PC via CDPcholine pathway. Thus, the intratracheally administered DDT or endosulfan to rats showed that both the insecticides cause manifestations in the biochemistry of microsomal membrane lipids, although the effects of DDT being more pronounced. Therefore, the translocation effects of these insecticides or metabolites from lung to liver is established.     

Butyltins in water, biofilm, animals and sediments of the west coast of India

Biofilm, fish, oyster, mussel, clam, surface seawater, suspended particulate matter (SPM), and sediment samples were collected from marine and/or estuarine waters of the west coast of India. These samples were analysed for butyltin derivatives such as dibutyltin (DBT) and tributyltin (TBT). The concentrations DBT plus TBT varied between 2.4 and 8.3, 163 and 363 ng/l, 5 and 2853 ng/g dry wt in the SPM, seawater and sediment samples, respectively, of the Marmugao harbour. The values of DBT plus TBT ranged between 0.60 and 29, 123 and 242 ng/l and 1.4 and 65 ng/g dry wt in SPM, water and sediment samples, respectively, collected from the Mandovi estuary. In the Dona Paula Bay the DBT plus TBT varied from 10 to 89 ng/l in surface seawater, and TBT from 10 to 513 ng/g in biofilm samples. For the coastal sediment samples the concentration of DBT plus TBT ranged between 36 and 133 ng/g dry wt of sediment. For the animal samples the DBT plus TBT ranged between 58 and 825 ng/g dry wt of the tissue. Mussel tissues contained the highest amount of DBT plus TBT (825 ng/g dry wt tissue), whereas highest TBT concentration was recorded in the oyster (732 ng/g dry wt). TBT was generally the most abundant butyltin compound in most of the samples suggesting fresh inputs and/or less degradation of TBT. A wide range of the observed butyltin concentrations suggests the presence of localized areas of contamination. Leaching of tributyltin-containing antifouling paints from the ocean going ships, fishing and recreational boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative to that in the surrounding seawater. When fed on TBT contaminated biofilm of the diatom Navicula subinflata, butyltin concentrations in the clam Paphia malabarica increased over the period of feeding suggesting the importance of biofilm in the transfer of butyltins to higher group of organisms.     

Comparative investigation of coal- and oil-fired boilers based on emission factors, ozone and secondary organic aerosol formation potentials of VOCs

Volatile organic compounds(VOCs) are the important precursors of the tropospheric ozone(O_3) and secondary organic aerosols(SOA),both of which are known to harm human health and disrupt the earth's climate system.In this study,VOC emission factors,O_3 and SOA formation potentials were estimated for two types of industrial boilers:coal-fired boilers(n=3) and oil-fired boilers(n=3).Results showed that EVOCs concentrations were more than nine times higher for oil-fire d boilers compared to those for coal-fired boilers.Emission factors of ΣVOCs were found to be higher for oil-fired boilers(9.26-32.83 mg-VOC/kg) than for coal-fired boilers(1.57-4.13 mg-VOC/kg).Alkanes and aromatics were obtained as the most abundant groups in coal-fired boilers,while oxygenated organics and aromatics were the most contributing groups in oil-fired boilers.Benzene,n-hexane and o-ethyl toluene were the abundant VOC species in coal-fired boiler emissions,whereas toluene was the most abundant VOC species emitted from oil-fired boilers.O_3 and SOA formation potentials were found 12 and 18 times,respectively,higher for oil-fired than for coal-fired boilers.Total OFP ranged from 3.99 to 11.39 mg-O_3/kg for coal-fired boilers.For oil-fired boilers,total OFP ranged from 36.16 to 131.93 mg-O_3/kg.Moreover,total secondary organic aerosol potential(SOAP) ranged from 65.4 to 122.5 mg-SOA/kg and 779.9 to 2252.5 mg-SOA/kg for the coal-fired and oil-fired boilers,respectively.