Male satin bowerbirds (<Emphasis Type="Italic">Ptilonorhynchus violaceus</Emphasis>) compensate for sexual signal loss by enhancing multiple display features

Numerous studies have focussed on the relationship between female choice and the multiple exaggerated sexual traits of males. However, little is known about the ability of males to actively enhance specific components of their display in response to the loss of one component. We investigated the capacity of male satin bowerbirds (Ptilonorhynchus violaceus) to respond to the loss of one of their sexual signals by performing an experiment in which we removed decorations at their bowers. We found that males compensated for decoration loss by increasing bower construction behaviour and decreasing their latency to bower painting. These results are novel because they suggest that males can assess the quality of their own display and make decisions about how to augment their displays. We discuss these results in the context of previous studies of mate choice in satin bowerbirds, as both of the supplementary behaviours we observed are known correlates of male mating success.     

A new THOR shoulder design: a comparison with volunteers, the Hybrid III, and THOR NT

OBJECTIVE: Since the shoulders are rarely seriously injured in frontal or oblique collisions, they have been given low priority in the development of frontal impact crash test dummies. The shoulder complex geometry and its kinematics are of vital importance for the overall dummy kinematics. The shoulder complex also influences the risk of the safety belt slipping off the shoulder in oblique forward collisions. The first aim of this study was to develop a new 50th percentile male THOR shoulder design, while the second was to compare the new shoulder, mounted on a THOR NT dummy, with volunteer, THOR NT, and Hybrid III range of motion and stiffness data. The third aim was to test the repeatability of the new shoulder during dynamic testing and to see how the design behaves with respect to belt slippage in a 45 degrees far-side collision. METHODS: The new 50th percentile THOR shoulder design was developed with the aid of a shell model of the seated University of Michigan Transportation Research Institute (UMTRI) 50th percentile male with coordinates for joints and bony landmarks (Schneider et al., 1983). The new shoulder design has human-like bony landmarks for the acromion and coracoid processes. The clavicle curvature and length are also made similar to that of a male human, as is the range of motion in the anterior-posterior, superior-inferior, and medial-lateral directions. The new shoulder design was manufactured and tested under the same conditions that T?rnvall et al. (2005b) used to compare the shoulder range of motion for the volunteers, Hybrid III, and THOR Alpha. The new design was also tested in two dynamic test configurations: the first was a 0 degrees full-frontal test and the second was a 45 degrees far-side test. The dummy tests were conducted with an R-16 seat with a three-point belt, the Delta V was 27.0+/-0.5 km/h and the maximum peak acceleration was approximately 14.6+/-0.5 g for each test. RESULTS: A new shoulder design with geometry close to that of humans was developed to be retrofitted to the THOR NT dummy. The results showed that the range of motion for the new shoulder complex during static loading was larger by at least a factor of three, for the maximum load (200 N/arm), than that of either the Hybrid III or the THOR NT; this means it was more similar to the volunteers' range of motion. It was observed that the THOR NT with the new shoulder did not slide out of the shoulder belt during a far-side collision. The performance of the new shoulder was reasonably repeatable and stable during both the static tests and the sled tests. CONCLUSION: A new shoulder for the THOR NT has been designed and developed, and data from static range of motion tests and sled tests indicate that the new shoulder complex has the potential to function in a more human-like manner on the THOR dummy.     

Ultrastructure of spermatozoa of <Emphasis Type="Italic">Onthophagus taurus</Emphasis> (Coleoptera,Scarabaeidae) exhibits heritable variation

Sperm competition is thought to be an important selective pressure shaping sperm form and function. However, few studies have moved beyond gross examinations of sperm morphology. Sperm length is subject to sexual selection via sperm competition in the scarab beetle Onthophagus taurus. Here, the structure and ultrastructure of spermatozoa in this species were investigated using light and electron microscopy. Spermatozoa were found to be filiform, measuring about 1,200 mm in length. The sperm head consists of a three-layered acrosome and a nuclear region bearing the anterior extension of the centriole adjunct. Acrosome and nuclear regions are bilaterally symmetric, with their axes of symmetry being orthogonal to each other. Head and flagellar structures are connected by a well-developed centriole adjunct. The sperm heads are asymmetrically surrounded by accessory material and embedded into the cytoplasm of the spermatocyst cell. The accessory material is produced inside the spermatids and then transferred to the outside due to a new membrane formed around the sperm’s organelles. The old spermatid membrane separates the accessory material from the cyst cell. The flagellum contains a 9+9+2 axoneme, two accessory bodies, and two mitochondrial derivatives of unequal size. The major mitochondrial derivative is significantly larger than the minor one. The axoneme is arranged in a sinusoidal manner parallel along the major mitochondrial derivative. The spermatozoa show no progressive motility when released in buffer solution which is likely to be the result of the flagellar arrangement and the structure of the major mitochondrial derivative. The cross-sectional area of the minor and the major mitochondrial derivatives show different patterns of genetic variation. The data provide the first estimates of genetic variation in sperm ultrastructure for any species, and give evidence for the persistence of genetic variation in ultrastructure required for the rapid and divergent evolution that characterizes spermatozoa generally.     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

Anatomical localization and stereoisomeric composition of <Emphasis Type="Italic">Tribolium castaneum</Emphasis> aggregation pheromones

We report that the abdominal epidermis and associated tissues are the predominant sources of male-produced pheromones in the red flour beetle, Tribolium castaneum and, for the first time, describe the stereoisomeric composition of the natural blend of isomers of the aggregation pheromone 4,8-dimethyldecanal (DMD) in this important pest species. Quantitative analyses via gas chromatography–mass spectrometry showed that the average amount of DMD released daily by single feeding males of T. castaneum was 878 ± 72 ng (SE). Analysis of different body parts identified the abdominal epidermis as the major source of aggregation pheromone; the thorax was a minor source, while no DMD was detectable in the head. No internal organs or obvious male-specific glands were associated with pheromone deposition. Complete separation of all four stereoisomers of DMD was achieved following oxidation to the corresponding acid, derivatization with (1R, 2R)- and (1S, 2S)-2-(anthracene-2,3-dicarboximido)cyclohexanol to diastereomeric esters, and their separation on reversed-phase high-performance liquid chromatography at −54°C. Analysis of the hexane eluate from Porapak-Q-collected volatiles from feeding males revealed the presence of all four isomers (4R,8R)/(4R,8S)/(4S,8R)/(4S,8S) at a ratio of approximately 4:4:1:1. A walking orientation bioassay in a wind tunnel with various blends of the four synthetic isomers further indicated that the attractive potency of the reconstituted natural blend of 4:4:1:1 was equivalent to that of the natural pheromone and greater than that of the 1:1 blend of (4R,8R)/(4R,8S) used in commercial lures.     

Intra-cultivar variability of the soil-to-grain transfer of fallout 137Cs and 90Sr for winter wheat

Differences between the root uptake of fallout radionuclides by different cultivars ('inter-cultivar' variability) growing on the same field may be influenced not only by genetic differences of the cultivars, but also by the spatial variability of the soil-to-grain transfer within the cultivation area of each cultivar. This 'intra-cultivar' variability was investigated in 2001 and 2002 for 137Cs and 90Sr using three winter wheat cultivars with four replicates for each cultivar at three different sites in Bavaria, Germany. The intra-cultivar variability proved to be in the same range as the inter-cultivar variability which was determined earlier at the same sites for both radionuclides. An ANOVA of the 137Cs data set revealed that the variability of the 137Cs soil-to-grain transfer was caused by the soil and climate (year) at the field sites and the interaction of cultivar and field. A significant contribution of the factor 'cultivar' alone to the variability could not be detected. This may be due to the complex environmental conditions to which plants are exposed in field experiments. To find wheat cultivars with minimal uptake of fallout radionuclides it may be better to examine the molecular mechanisms of their root uptake in order to identify targets for breeding "safer" plants.     

Trace element levels in foetus-mother pairs of short-beaked common dolphins (Delphinus delphis) stranded along the French coasts

Tissues of foetus-mother pairs of common dolphins (Delphinus delphis) stranded along the French coasts (Bay of Biscay and English Channel) were analysed for their Cd, Cu, Hg, Se and Zn contents. In the kidneys, foetal Cd levels were extremely low, and strong relationships between Cu and Zn suggested the involvement of metallothioneins since early foetal life. The results also indicated a limited maternal transfer of Hg during pregnancy since levels in the tissues of foetuses were below 1 microg g(-1) w.wt. However, hepatic Hg levels in foetuses increased with body length, and were also proportionate to maternal hepatic, renal and muscular Hg levels. Lastly, affinities between Hg and Se in tissues would participate in Hg neutralisation in both mothers--through tiemannite granules--and fetuses--through reduced glutathione--counteracting the toxic effects linked to the particularly high quantities of methyl-Hg to which marine mammals are naturally exposed.     

Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

The transfer of 239/240Pu to cow milk

In summer 1993 we measured the transfer of (239/240)Pu to milk from herbage from a pasture located 5 km from the Chernobyl nuclear power plant. In one treatment cows were allowed to graze freely on the pasture. In a second treatment, cows were fed herbage collected from the pasture in stalls. The milk transfer coefficient; F(m) did not vary significantly between treatments and the mean value of 7.5x10(-6)d l(-1) was higher than previously reported values. Despite many values of F(m) for Pu in the literature we identified few relevant original data sets. Transfer coefficient values for Pu are only appropriate when used in conjunction with a specified time period or an appropriate model which allows for the biological half-life. We recommend for screening purposes an F(m) value of 1x10(-5)d l(-1) for Pu, with an order of magnitude lower value being appropriate for cows which are only exposed for one grazing season.     

Distribution of organotin compounds in the bivalves of the Aegean Sea, Greece

Five bivalve species--Mytilus galloprovinciallis (Mediterranean mussels), Venus gallina (stripped venus), Modiola barbatus L. (bearded horse mussels), Pecten jacobeus (scallops) and Callista chione (hard clams)--were collected from seven areas in Aegean Sea, Greece, between August 2001 and January 2003 and analyzed for organotins (OTs). The concentrations (as geometric means) found were 17.1 ng g-1 for tributyltin (TBT), 18.8 ng g-1 for dibutytltin (DBT), 7.8 ng g-1 for monobutyltin (MBT) and 13.0 ng g-1 for triphenyltin (TPhT) (wet weight), which are at similar or lower levels than those reported worldwide. Studying OTs distribution between different bivalve species, lower concentrations were observed in mediterranean mussels, possibly due to their growth in water column (grown on sea net pens in mussel farms), in contrast to the free-ranging species, collected from fishing grounds. Concentrations of the OTs in the examined bivalves varied seasonally.