Coupling hydrologic and economic modeling for wetland management multi-optimization in Tram Chim National Park,Vietnam

We developed a comprehensive coupling framework with a multi-objective optimization that bridges a water balance model (WBM) and a wetland service model (WSM) to supporting wetland management. The framework was tested for management in Tram Chim National Park (with four wetland zones) where hydro-economic optimization was needed. The framework used (1) a model coupling process bridging WBM and WSM to create a modular hydro-economic model (MHEM), (2) a multi-objective optimization, and (3) an anneal scheduling for scenario optimization. The framework demonstrated its competency in identifying cause–effect/interaction flows (bridges) between WBM and WSM to design MHEM to simulate optimized scenarios; for the case study, the multi-objective optimization was met for all wetland zones. Results suggested a flexible consideration of management scales for optimization, i.e. hydrologic optimization at a zone level and net benefit optimization at a Park level. Our framework is applicable to supporting complex wetland decisions considering multiple objectives.     

Photochemical smog modeling for assessment of potential impacts of different management strategies on air quality of the Bangkok Metropolitan Region, Thailand

A photochemical smog model system, the Variable-Grid Urban Airshed Model/Systems Applications International Mesoscale Model (UAM-V/SAIMM), was used to investigate photochemical pollution in the Bangkok Metropolitan Region (BMR). The model system was first applied to simulate a historical photochemical smog episode of two days (January 13-14, 1997) using the 1997 anthropogenic emission database available at the Pollution Control Department and an estimated biogenic emission. The output 1-hr ozone (O3) for BMR, however, did not meet the U.S. Environmental Protection Agency suggested performance criteria. The simulated minimum and maximum O3 values in the domain were much higher than the observations. Multiple model runs with different precursor emission reduction scenarios showed that the best model performance with the simulated 1-hr O3 meeting all the criteria was obtained when the volatile organic compound (VOC) and oxides of nitrogen (NOx) emission from mobile source reduced by 50% and carbon monoxide by 20% from the original database. Various combinations of anthropogenic and biogenic emissions in Bangkok and surrounding provinces were simulated to assess the contribution of different sources to O3 pollution in the city. O3 formation in Bangkok was found to be more VOC-sensitive than NOx-sensitive. To attain the Thailand ambient air quality standard for 1-hr O3 of 100 ppb, VOC emission in BMR should be reduced by 50-60%. Management strategies considered in the scenario study consist of Stage I, Stage II vapor control, replacement of two-stroke by four-stroke motorcycles, 100% compressed natural gas bus, 100% natural gas-fired power plants, and replacement of methyltertiarybutylether by ethanol as an additive for gasoline.     

CH4 and CO emissions from rice straw burning in South East Asia

Atmospheric samples collected during rice straw burning at four different locations in Viet-Nam during the dry (March 1992, February 1993) and wet season (August 1992) were analysed for CO₂, CO, and CH₄. The emission ratios relative to CO₂ for CO and CH₄ for rice straw burning during the dry season were comparable to those observed on samples collected during burning of savanna in Africa or forest in the USA. During the wet season, however the emission ratios for CO and CH₄ relative to CO₂ were 3 to 10 times higher. With these emission ratios and estimates of rice production from Southeastern Asia, we estimated that burning of rice straw emits annually about 2.2 Tmol of CO (26 TgC) and 0.2 Tmol of CH₄ (2.4 TgC) to the atmosphere. Taking into account these new results, CO and CH₄ fluxes from biomass burning could be reevaluated by 5–21% and 5–24%, respectively, in respect with previous estimates of these gas emissions from all biomass burning activities.     

Bench-scale testing of a novel soil PFAS treatment train for informed remedial planning and decision-making

Bench-scale batch tests were conducted to assess the potential applicability of a combined separation/concentration/destruction treatment train to address soils and sediments impacted by per- and polyfluoroalkyl substances (PFAS) contamination at Schriever Space Force Base with historic aqueous film-forming foam (AFFF). Specifically, a novel treatment train coupling soil washing (for treatment of impacted soil/sediment) with foam fractionation (for treatment of the wash water [WW] generated during soil washing) and electrochemical oxidation (ECO, for treatment of the foam fractionate generated during foam fractionation) was evaluated at the bench scale using site-specific materials. Results presented herein show that the AFFF-impacted sandy soils with low organic content were amenable to treatment via soil washing. However, the removal of hydrophobic PFAS, such as perfluorooctanesulfonic acid (PFOS), from the organic-rich sediments was challenging. Results from batch desorption experiments were within a factor of 2 of those generated by soil washing bench studies, suggesting that simple batch tests can potentially be used to reasonably predict the treatment efficacy of soil washing. Long-chained perfluoroalkyl acids (PFAAs) within the WW were removed more effectively in the foam fractionation studies as compared to short-chain PFAAs. Addition of a surfactant, such as cetrimonium bromide (CTAB), enhanced foaming but only marginally improved the treatment of short-chained PFAAs and in some cases inhibited PFOS removal. ECO reduced PFAS concentrations in the foam fractionate generated during foam fractionation by several orders of magnitude. However, generation of unwanted byproducts may warrant further treatment and/or disposal. Overall, results from this study provide a novel data set highlighting the site-dependent nature of these PFAS remedial technologies and how simple, low-cost bench tests can be reliably leveraged for informed decision-making during PFAS remedial planning.     

Applicability of micellar electrokinetic chromatography to kinetic studies of photocatalytic oxidation of dibenzo-p-dioxin

Micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate was tested for its ability to analyze mixtures containing three dioxin derivatives. Dioxin-containing samples, subjected to photocatalytic oxidation using TiO₂ and/or SnO₂ as the semiconductor catalyst were analyzed by MEKC to obtain the rate constant for each dioxin when it was degraded individually or in the presence of the other two dioxins. A significant degree of analyze competition was observed and the mixed catalyst offered important synergism.     

Experimental and numerical study of methylparaben decomposition in aqueous solution using the UV/H2O2 process

The present paper aims at presenting a kinetic model that is supposed to result in the decomposition of methylparaben in completely mixed batch reactor (CMBR) using the UV/H₂O₂ process. The proposed model incorporates photochemical, chemical reactions and their constant rates to formulate the overall kinetic rate expressions which are integrated into MATLAB. Thus, the changes in pH values during the process of oxidation are taken into consideration. In addition, the effects of hydrogen peroxide (HP) dosage, as well as the concentration of hydroxyl radicals, are examined. Accordingly, the pseudo-first-order rate constant, its variation as functions of HP concentration, incident UV-light intensity and the limitations of the adopted approach are discussed. In line with that, the authors provided evidence of the validity of the kinetic model through the exposure of previous experimental studies as reported in the literature review then through the evidence of the present experimental data.     

Smoke aerosols dispersion and transport from the 2013 New South Wales (Australia) bushfires

Environmental monitoring and modelling, especially in the regional context, has seen significant progress with the widely usage of satellite measurement in conjunction with local meteorological and air quality monitoring to understand the atmospheric dispersion and transport of air pollutants. This paper studies the application of these data and modelling tools to understand the environment effects of a major bushfire period in the state of New South Wales (NSW), Australia, in 2013. The bushfires have caused high pollution episodes at many sites in the greater Sydney metropolitan areas. The potential long-range transport of aerosols produced by bushfires to other region and states has been seen by regulators as a major concern. Using data and images collected from satellites, in addition to the results obtained from different simulations carried out using HYSPLIT trajectory model and a regional meteorological model called Conformal Cubic Atmospheric Model (CCAM), we were able to identify at least 2 days on which the smoke aerosols from bush fires in NSW has been transported at high altitude to the northern state of Queensland and the Coral Sea. As a result, widespread high particle concentration in South East Queensland including the Brisbane area, as measured by nearly all the air quality monitoring stations in this region, occurred on the day when the smoke aerosols intruded to lower altitude as indicated by the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) Lidar measurements on the CALIPSO (Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observation) satellite. The use of meteorological or air quality modelling to connect the ground-based measurements with satellite observations as shown in this study is useful to understand the pollutant transport due to bushfires and its impact on regional air quality.     

Inland harmful cyanobacterial bloom prediction in the eutrophic Tri An Reservoir using satellite band ratio and machine learning approaches

Environmental Science and Pollution Research - In recent years, Tri An, a drinking water reservoir for millions of people in southern Vietnam, has been affected by harmful cyanobacterial blooms...