Interactions between metal ions and the biopolymer in activated sludge: quantification and effects of system pH value

The quantification and effects of system pH value on the interactions between Pb(II) and the biopolymer in activated sludge were investigated. The biopolymer had two protein-like fluorescence peaks (Ex/Em = 280 nm/326–338 nm for peak A; Ex/Em = 220–230 nm/324–338 nm for peak B). The fluorescence intensities of peak B were higher than those of peak A. The fluorophores of both peaks could be largely quenched by Pb(II), and the quencher dose for peak B was about half of that for peak A. The modified Stern-Volmer equation well depicted the fluorescence quenching titration. The quenching constant (Ka) values for both peaks decreased with rising system pH value, and then sharply decreased under alkaline conditions. It could be attributed to that the alkaline conditions caused the reduction of available Pb(II) due to the occurrence of Pb(OH)₂ sediments. The Ka values of peak B were bigger than those for peak A at the same system pH values. Accordingly, the aromatic proteins (peak B) played a key role in the interactions between metal ions and the biopolymer.

Open image in new window

     

Predictive statistical modelling of cadmium content in durum wheat grain based on soil parameters

Regulatory limits on cadmium (Cd) content in food products are tending to become stricter, especially in cereals, which are a major contributor to dietary intake of Cd by humans. This is of particular importance for durum wheat, which accumulates more Cd than bread wheat. The contamination of durum wheat grain by Cd depends not only on the genotype but also to a large extent on soil Cd availability. Assessing the phytoavailability of Cd for durum wheat is thus crucial, and appropriate methods are required. For this purpose, we propose a statistical model to predict Cd accumulation in durum wheat grain based on soil geochemical properties related to Cd availability in French agricultural soils with low Cd contents and neutral to alkaline pH (soils commonly used to grow durum wheat). The best model is based on the concentration of total Cd in the soil solution, the pH of a soil CaCl₂ extract, the cation exchange capacity (CEC), and the content of manganese oxides (Tamm’s extraction) in the soil. The model variables suggest a major influence of cadmium buffering power of the soil and of Cd speciation in solution. The model successfully explains 88% of Cd variability in grains with, generally, below 0.02 mg Cd kg^?1 prediction error in wheat grain. Monte Carlo cross-validation indicated that model accuracy will suffice for the European Community project to reduce the regulatory limit from 0.2 to 0.15 mg Cd kg^?1 grain, but not for the intermediate step at 0.175 mg Cd kg^?1. The model will help farmers assess the risk that the Cd content of their durum wheat grain will exceed regulatory limits, and help food safety authorities test different regulatory thresholds to find a trade-off between food safety and the negative impact a too strict regulation could have on farmers.

     

Recycling nickel from spent catalyst of Phu My fertilizer plant as a precursor for exhaust gas treatment catalysts preparation

In this study, a very promising way of treating and recycling spent nickel catalysts of fertilizer plants in Vietnam was proposed. Firstly, nickel was recovered from spent catalyst using HNO₃—leaching process. Results show that nickel recovery of over 90% with a purity of over 90% can be achieved with HNO₃ 2.1–2.5 M at 100?°C in 75 min. The residue after leaching is not considered as a hazardous waste according to the Vietnamese regulations. Then, the leachate solution was used as a precursor to prepare a model catalyst for exhaust gas (CO, HC, NO_x) treatment. In comparison with the catalyst prepared from the commercial nickel nitrate solution, the catalyst synthesized from recovered nickel exhibits similar properties and activities. The influence of Ni loading of Ni/alumina catalyst as well as the modification of active phase by some metals addition (Mn, Ba, Ce) was also investigated. It is feasible to modify active phase by transition metals such as Mn, Ba, and Ce for complete oxidation of CO and HC at 270?°C and a reduction of NO_x below 350?°C at high volumetric flow condition (GHSV?=?110.000 h^?1).     

Applicability of micellar electrokinetic chromatography to kinetic studies of photocatalytic oxidation of dibenzo-p-dioxin

Micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate was tested for its ability to analyze mixtures containing three dioxin derivatives. Dioxin-containing samples, subjected to photocatalytic oxidation using TiO₂ and/or SnO₂ as the semiconductor catalyst were analyzed by MEKC to obtain the rate constant for each dioxin when it was degraded individually or in the presence of the other two dioxins. A significant degree of analyze competition was observed and the mixed catalyst offered important synergism.     

Bench-scale testing of a novel soil PFAS treatment train for informed remedial planning and decision-making

Bench-scale batch tests were conducted to assess the potential applicability of a combined separation/concentration/destruction treatment train to address soils and sediments impacted by per- and polyfluoroalkyl substances (PFAS) contamination at Schriever Space Force Base with historic aqueous film-forming foam (AFFF). Specifically, a novel treatment train coupling soil washing (for treatment of impacted soil/sediment) with foam fractionation (for treatment of the wash water [WW] generated during soil washing) and electrochemical oxidation (ECO, for treatment of the foam fractionate generated during foam fractionation) was evaluated at the bench scale using site-specific materials. Results presented herein show that the AFFF-impacted sandy soils with low organic content were amenable to treatment via soil washing. However, the removal of hydrophobic PFAS, such as perfluorooctanesulfonic acid (PFOS), from the organic-rich sediments was challenging. Results from batch desorption experiments were within a factor of 2 of those generated by soil washing bench studies, suggesting that simple batch tests can potentially be used to reasonably predict the treatment efficacy of soil washing. Long-chained perfluoroalkyl acids (PFAAs) within the WW were removed more effectively in the foam fractionation studies as compared to short-chain PFAAs. Addition of a surfactant, such as cetrimonium bromide (CTAB), enhanced foaming but only marginally improved the treatment of short-chained PFAAs and in some cases inhibited PFOS removal. ECO reduced PFAS concentrations in the foam fractionate generated during foam fractionation by several orders of magnitude. However, generation of unwanted byproducts may warrant further treatment and/or disposal. Overall, results from this study provide a novel data set highlighting the site-dependent nature of these PFAS remedial technologies and how simple, low-cost bench tests can be reliably leveraged for informed decision-making during PFAS remedial planning.     

Leaching of Alkali from Concrete in Contact with Waterways

Concrete is usually the preferred material for construction of structures in contact with water during their service life. Early age exposure to water is beneficial for curing of concrete structures. However, the pollution of water from freshly cast concrete in contact with water has not been investigated in detail. A significant increase in the alkalinity has recently been observed in a stream in contact with freshly installed concrete culverts. High alkalinity has caused distress to fresh water fish in the stream. A preliminary laboratory study was commenced to explore the effect of leaching of alkali into water from freshly placed concrete. Freshly cast concrete specimens were exposed to fresh water, covering a range of conditions observed in the field such as volume of concrete/volume of water, age of exposure and cement content. Analysis of the results indicated that early age contact with fresh concrete can lead to an increase in the pH levels of water up to 11, similar to the levels of pH observed in pore water inside freshly cast concrete. It was noted that until an age of 4 days from casting of concrete, the age of exposure does not significantly affect the changes in the peak pH levels of water. Continuous monitoring of water in contact with concrete also indicated that the pH levels diminish with time, which is attributed to the possible reaction of calcium hydroxide with atmospheric carbon. The paper will present the experimental study, the results, analysis and outcomes as well as planning of a more comprehensive study to observe possible ways of reducing the leaching of alkali from freshly placed concrete.     

Indoor air pollution levels in public buildings in Thailand and exposure assessment

Levels of pollutants including PM2.5 and PM2.5 composition (black carbon and water soluble ions), SO(2), NO(2), CO, CO(2), and BTEX (benzene, toluene, ethylbenzene, xylene) were monitored for indoor and outdoor air at a university campus and a shopping center, both located in the Northern suburb of Bangkok. Sampling was done during December 2005-February 2006 on both weekdays and weekends. At the university, indoor monitoring was done in two different air conditioned classrooms which shows the I/O ratios for all pollutants to be below 0.5-0.8 during the weekends. However, on weekdays the ratios for CO(2) and most detected BTEX were above 1.0. The concept of classroom occupancy was defined using a function of the student number in a lecture hour and the number of lecture hours per day. Classroom 2, which had a higher occupancy than classroom 1, was characterized by higher concentrations of most pollutants. PM2.5 was an exception and was higher in classroom 1 (37 microg/m(3), weekdays) as compared to classroom 2 (26 microg/m(3), weekdays) which was likely linked to the dust resuspension from the carpeted floor in the former. Monitoring was also done in the shopping mall at three different sites. Indoor pollutants levels and the I/O ratios at the shopping mall were higher than at the university. Levels of all pollutants measured at the car park, except for toluene and CO(2), were the highest. I/O ratios of the pollutants at the mall were above 1.0, which indicates the relatively higher influence of the indoor sources. However, the black carbon content in PM2.5 outdoor is higher than indoor, which suggest the important contribution from outdoor combustion sources such as the traffic. Major sources of outdoor air pollution in the areas were briefly discussed. Exposure modeling was applied using the time activity and measured pollutant concentrations to assess the exposure of different groups of people in the study areas. High exposure to PM2.5, especially for the people working in the mall, should be of health effect concern.     

Phosphorus runoff from agricultural land and direct fertilizer effects: a review

Phosphorus (P) is one of the most important mineral nutrients in agricultural systems, and along with nitrogen (N), is generally the most limiting nutrient for plant production. Farming systems have intensified greatly over time, and in recent years it has become apparent that the concomitant increase in losses of N and P from agricultural land is having a serious detrimental effect on water quality and the environment. The last two decades have seen a marked increase in research into the issues surrounding diffuse losses of P to surface and ground water. This paper reviews this research, examining the issue of P forms in runoff, and highlighting the exceptions to some generally held assumptions about land use and P transport. In particular the review focuses on P losses associated with recent P fertilizer application, as opposed to organic manures, both on the amounts and the forms of P in runoff water. The effects of the physicochemical characteristics of different forms of P fertilizer are explored, particularly in relation to water solubility. Various means of mitigating the risk of loss of P are discussed. It is argued that the influence of recent fertilizer applications is an under-researched area, yet may offer the most readily applicable opportunity to mitigate P losses by land users. This review highlights and discusses some options that have recently become available that may make a significant contribution to the task of sustainable management of nutrient losses from agriculture.     

Nanotechnology for improved production of algal biofuels: a review

Environmental Chemistry Letters - Fossil fuel depletion and carbon dioxide emissions are calling for carbon neutral energies such as algal biofuels, yet actual production of agal biofuels is...