鄱阳湖典型湿地土壤-植物系统重金属沿湖向富集及迁移转换特征分析

特殊的水文节律导致鄱阳湖形成面积较大的周期性环湖消落带,大量的营养物质和污染物极易在消落带中发生沉积,选择鄱阳湖典型河口型消落带,沿湖向按照不同植被类型设置采样断面,采集土壤-沉积物和优势植物样品(不同组织),分析不同时空下土壤/沉积物和优势植物体中重金属(Cr、 Ni、 Cu、 Zn、 As、 Cd、 Sb和Pb)的含量特征及富集水平,并进一步分析土壤-植物系统中重金属的迁移转换特征,揭示鄱阳湖典型消落带土壤-植物系统重金属迁移转换的影响因素.结果表明,消落带土壤/沉积物重金属含量沿湖向表现为明显的分布规律,呈现为先升高后降低的分布特征,即季节性淹水带土壤/沉积物是重金属富集的主要地带,Cu、 Pb和Sb在土壤/沉积物中的富集水平较高,其中Cu和Sb为显著富集(EF>5);潜在生态风险结果表明季节性淹水带总体处于轻度生态危害水平(70≤RI<140),显著高于淹水带和未淹水带.消落带沿湖向带状分布的优势植物体中重金属含量并未表现出显著的空间分布特征,但表现为显著的季节差异,生长季(4月)优势植物体内重金属具有较高的含量水平,重金属不同介质和组织的分配大体遵循基质>根...     

长三角区域人为源活性挥发性有机物高分辨率排放清单

基于长三角区域41个城市本地实测,结合美国EPA的SPECIATE 4.4数据库,建立了长三角区域人为源活性挥发性有机物(VOCs)高分辨率排放清单,分析了区域内VOCs的排放特征和组分构成;计算了VOCs的臭氧生成潜势(OFP)和二次有机气溶胶生成潜势(SOAP).结果表明,2017年,长三角区域人为源VOCs排放总量为4.9×10⁶ t,其中工艺过程源、工业溶剂使用源、移动源、生活源、储运源、农业源和废弃物处理源排放贡献分别为：34.3%、27.1%、19.5%、9.7%、6.1%、2.5%和0.4%.芳香烃和烷烃是VOCs的主要种类,均各占长三角VOCs排放总量的25%.工艺过程源、工业溶剂使用源、移动源和生活源OFP贡献率分别为38.3%、21.5%、16.4%和13.2%,SOAP贡献率分别为26.2%、34.1%、18.1%和17.9%,与VOCs排放量的主要贡献源基本一致.各城市VOCs重点排放行业存在较大差异,重点城市群以石化化工和装备制造为主,区域北部则以木材家具等涂装行业为主.计算表明,丙烯、间/对-二甲苯和乙烯是臭氧主要贡献源;甲苯、1,2,...     

北江中上游地表水和沉积物中PAHs和PCBs污染特征和风险评估

采用气相色谱-质谱法（GC-MS）测定了北江中上游流域地表水和沉积物样品中多环芳烃（PAHs）和多氯联苯（PCBs）类污染物的含量,分析了PAHs和PCBs的污染水平和空间分布,并评估了污染物的健康风险和生态风险.结果表明,16种PAHs单体在所有水样和沉积物样品中均被检出,检出范围分别为41.82~443.04 ng·L^-1和59.58~635.73 ng·g^-1,北江中上游PAHs的污染水平为中、轻度.水中PAHs以二环芳烃和三环芳烃为主,沉积物中以三环芳烃和四环芳烃为主.在水样中检出了17种PCBs,浓度范围0.81~287.50 ng·L^-1,以六氯联苯和七氯联苯为主;沉积物中检出了8种PCBs,含量范围0.13~3.96 ng·g^-1,以五氯联苯和七氯联苯为主.整个调查区域内地表水中PAHs和PCBs的终生致癌风险指数小于10^-4,处于中、低水平;非致癌风险指数均小于1,不存在非致癌风险.采用风险商值（RQ）法对地表水中污染物进行生态风险评价,研究区域内地表水中PAHs和PCBs生态风险总体处于中低风险水平,个别点位存在重度风险的污染物单体,值得引起重视.采用沉积物质量基准法（SQGs）对沉积物中污染物进行生态风险评估,沉积物中PAHs和PCBs均处于较低的生态风险水平.     

河流型水源地源水有机物种类分布特性及其与消毒副产物关系

研究了不同水文期条件下长三角某典型河流型水源地源水有机物种类分布特性及其与消毒副产物关系。结果表明，该水源地源水有机污染特性呈现出丰水期>平水期>枯水期的特点，水体腐殖化程度依次降低。经树脂富集分离后水样溶解性有机物(DOM)各组分占总有机碳(DOC)的比例有所不同。丰水期：疏水性有机酸(HPO A,38%)>亲水性有机物(HPI,26%)>过渡亲水性有机酸(TPI A,16%)>疏水性有机中性物质(HPO N,12%)>过渡亲水性中性物质(TPI N,8%)；平水期：HPO A(32%)>HPO N(22%)>TPI A(20%)>HPI(18%)>TPI N(8%)；枯水期：HPO A(28%)>TPI A(24%)>HPO N(20%)>HPI(19%)>TPI N(9%)。DOM中仅HPI组分比紫外吸光度值(SUVA)低于原水，其余均高于原水，其中HPO A组分SUVA值最高，是原水的177倍。各水文期条件下，疏水性有机物（疏水性有机酸和疏水性中性物质）对三卤甲烷和卤乙酸生成的贡献，分别超过全部有机物氯化后消毒副产物生成量的60%和65%，表明疏水性有机物是最主要的消毒副产物前体物，应当作为水处理工艺重点去除的有机物组分。各水文期源水有机物特性与消毒副产物生成潜能的关系变化不大，三卤甲烷生成潜能(STHMFP)与SUVA的线性相关度较高，卤乙酸生成潜能(SHAAFP)与SUVA的线性相关度一般。因此，可用水样SUVA值间接反映三卤甲烷生成潜能，以利于在实际生产中快速监控水中消毒副产物前体物的变化趋势     

Phosphorus recovery from biogas fermentation liquid by Ca-Mg loaded biochar

Shortage in phosphorus(P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar(Ca–Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca–Mg/biochar was rich in organic functional groups and in Ca O and Mg O nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca–Mg/biochar could be accelerated by nano-Ca O and nano-Mg O particles and reached equilibrium after 360 min.The process was endothermic, spontaneous, and showed an increase in the disorder of the solid–liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca–Mg/biochar could not be significantly influenced by the typical p H level of biogas fermentation liquid. The nano-Ca O and nano-Mg O particles of Ca–Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca–Mg/biochar were in the order of Ca–Mg/B600 Ca–Mg/B450 Ca–Mg/B300. Results revealed that postsorption Ca–Mg/biochar can continually release P and is more suitable for an acid environment.     

Three-dimensional hydrodynamic and water quality model for TMDL development of Lake Fuxian, China

Lake Fuxian is the largest deep freshwater lake in China. Although its average water quality meets Class I of the China National Water Quality Standard (CNWQS), i.e., GB3838-2002, monitoring data indicate that the water quality approaches the Class II threshold in some areas. Thus it is urgent to reduce the watershed load through the total maximum daily load (TMDL) program. A three-dimensional hydrodynamic and water quality model was developed for Lake Fuxian, simulating flow circulation and pollutant fate and transport. The model development process consists of several steps, including grid generation, initial and boundary condition configurations, and model calibration processes. The model accurately reproduced the observed water surface elevation, spatiotemporal variations in temperature, and total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) concentrations, suggesting a reasonable numerical representation of the prototype system for further TMDL analyses. The TMDL was calculated using two interpretations of the water quality standards for Class I of the CNWQS based on the maximum instantaneous surface and annual average surface water concentrations. Analysis of the first scenario indicated that the TN, TP and COD loads should be reduced by 66%, 68% and 57%, respectively. Water quality was the highest priority; however, local economic development and cost feasibility for load reduction can pose significant issues. In the second interpretation, the model results showed that, under the existing conditions, the average water quality meets the Class I standard and therefore load reduction is unnecessary. Future studies are needed to conduct risk and cost assessments for realistic decision-making.     

广东东江流域多氯萘的大气沉降研究

为考察多氯萘(PCNs)通过大气沉降作用对东江流域的影响,利用通用型大气沉降采样器,在东江流域广东省境内代表性地段布设11个采样点,于2010年冬季(1、2月)和夏季(7、8月)分别采集和分析了沉降样品中PCNs的通量及组成.结果表明,东江流域总PCNs日均沉降通量为828 pg.(m2.d)-1,对应毒性当量(TEQ)为0.14 pg.(m2.d)-1,由此估算东江流域广东境内PCNs年沉降总量为8.5 kg,相应TEQ年沉降总量为1.3 g.地域上,广州和东莞地区沉降通量明显高于惠州,同时城镇采样点的沉降通量显著高于农村;季节上,各采样点总体呈现夏季高于冬季的特点;组成上,三氯萘(tri-CNs)是主要的污染物,占总量的50%以上,但广州、东莞的5～8氯萘含量比惠州高.来源分析表明,东江流域PCNs的大气沉降可能受燃烧源与非燃烧源的共同影响;东莞大气沉降中PCNs多来自燃烧源,广州点大气沉降的PCNs以非燃烧源为主.     

1980—2010年温榆河的水环境质量时空演变特征

以温榆河流域的主要超标污染物 COD 和氨氮为研究对象,通过历史数据和现场调查,系统研究了1980—2010年间温榆河的水环境质量时空演变特征.结果表明,温榆河流域水环境质量经历了清洁-污染-重度污染-污染遏制的过程,但水质现状均不达标;温榆河流域水环境质量好坏依次是上段>下段,温榆河>坝河>清河,并且Pearson相关分析表明,温榆河下段COD和NH+4-N浓度主要受清河影响;温榆河流域COD污染逐步遏制(超标倍数<1)、NH+4-N污染凸显(超标倍数8～20),耗氧物质处于从COD为主向NH+4-N为主转换的阶段;支流清河和坝河不仅是温榆河干流入河污染负荷的首要输入途径,而且支流上污水集中处理设施的排水是温榆河干流的首要补给来源(70.1%),其运行状况与升级改造对改善温榆河水环境质量至关重要.