Characterization of lead,cadmium, arsenic and nickel in PM(2.5) particles in the Athens atmosphere,Greece

Concentrations of Pb, Cd, As and Ni in PM(2.5) particles were measured in samples collected, using low volume PM(2.5) samplers (Harvard Impactor system, HI) at two sites in Athens basin; Patission Street in Athens city center and Rentis, a semi-urban and industrial area, during March 1995-March 1996. Sample analysis for Pb, Cd, Ni and As was accomplished by electrothermal atomic absorption spectrometry after total digestion. Annual geometric mean values in 183 PM(2.5) particles samples were found to be: Pb: 143 nanogram(-3); Cd: 0.34 nanogram(-3); Ni: 4.55 nanogram(-3); As: 0.79 nanogram(-3). The geographical and temporal distribution patterns were investigated. Pb exhibited higher values during the winter period. For the other elements no significant seasonal variation was observed. Wind direction, air temperature and relative humidity affected element concentrations. Principal component analysis was applied on the data to enable source apportionment of toxic elements in PM(2.5) particles. It was found that Pb, As and Ni have common sources, which could be vehicles emissions/oil combustion and resuspended road dust. Cd and a portion of As originate from industrial activities.     

Coagulation and precipitation as post-treatment of anaerobically treated primary municipal wastewater.

The main objective of this study was to investigate the feasibility of coagulation as a post-treatment method of anaerobically treated primary municipal wastewater. Both mesophilic and ambient (20 degrees C) temperature conditions were investigated in a laboratory-scale upflow anaerobic sludge bed (UASB) reactor. In addition, optimization of the coagulant, both in terms of type and dose, was performed. Finally, phosphorus removal by means of aluminum and iron coagulation and phosphorus and ammonia nitrogen removal by means of struvite precipitation were studied. Anaerobic treatment of primary effluent at low hydraulic retention times (less than 15 hours) resulted in mean chemical oxygen demand (COD) removals ranging from 50 to 70%, while, based on the filtered treated effluent, the mean removals increased to 65 to 80%. Alum coagulation of the UASB effluent gave suspended solids removals ranging from approximately 35 to 65%. Turbidity removal reached up to 80%. Remaining COD values after coagulation and settling were below 100 mg/L, while remaining total organic carbon (TOC) levels were below 50 mg/L. Filterable COD levels were generally below 60 mg/L, while filterable TOC levels were below 40 mg/L. All coagulants tested, including prepolymerized aluminum and iron coagulants, demonstrated similar efficiency compared with alum for the removal of suspended solids, COD, and TOC. Regarding struvite precipitation, optimal conditions for phosphorus and nitrogen removal were pH 10 and molar ratio of magnesium: ammonia-nitrogen: phosphate-phosphorus close to the stoichiometric ratio (1:1:1). During struvite precipitation, removal of suspended solids reached 40%, while turbidity removal reached values up to 80%. The removal of COD was approximately 30 to 35%; yet, when removal of organic matter was based on the treated filterable COD, the removal increased to approximately 65%. In addition, nitrogen was removed by approximately 70%, while phosphorus removal ranged between approximately 30 and 45% on the basis of the initial phosphorus concentration. Finally, size fractionation of the organic matter (COD) showed that the various treatment methods were capable of removing different fractions of the organic matter.     

Effect of arsenic and mercury speciation on inhibition of respiration rate in activated sludge systems

The inhibition effect of arsenite, As(III), arsenate, As(V), inorganic mercury, Hg(II) and methylmercury, MeHg, on the respiration rate of activated heterotrophic sludge microorganisms was evaluated. As(III) and MeHg were much more toxic to activated sludge than As(V) and Hg(II) respectively. The effect of various experimental parameters on the toxicity, such as sludge age, concentration of suspended solids and exposure time, was investigated. An increase of sludge age or the concentration of suspended solids reduces the observed inhibition. Longer exposure seems to dramatically increase the inhibition of As(III), MeHg and Hg(II) during the first hours of exposure, while the later inhibition increases at a slower rate. On the contrary, in the presence of As(V), 24 hours after exposure, the respiration rate was similar to that of the control biomass.     

Risk-relevant indices for the characterization of persistence of chemicals in a multimedia environment

The present research study proposes a new set of appropriately defined indices for the characterization of persistence of chemicals in a multimedia environment that prominently figures as a key exposure-based indicator within contemporary frameworks of chemical hazard and risk assessment, as well as recent international regulatory initiatives. Effectively overcoming some of the limitations associated with traditional approaches that could lead to a potential misclassification of chemical substances, the proposed set of persistence indices retain also a conceptually insightful and computational appeal. Conceptually inspired by certain measures/indices for the characteristic time found in classic dynamic systems theory, and technically relying on notions and methods from the theory of matrices, the new performance indices can be easily calculated on the basis of a dynamic multimedia environmental model and the aid of a software package such as MATLAB. In particular, an extension of the notion of equivalence width as a quantitative proxy of overall persistence is introduced, that captures the dynamic history of the chemical's environmental behavior, while remaining independent of the particular release pattern and discharge conditions (thus overcoming the standardization difficulties encountered when a large number of chemicals need to be first screened and classified in a tiered hazard assessment methodology). Furthermore, a second persistence index is introduced whose value can be analytically calculated through the solution of a simple Lyapunov matrix equation bearing some resemblance to certain measures of system resilience used in theoretical biology and ecology, yet inspired by system-theoretic notions associated with the Lyapunov framework of analysis in systems science. Furthermore, for both persistence measures a comparison is made with the slowest time-constant associated with the specific chemical dynamics in a multimedia environment, and upper and lower bounds are established. Finally, the proposed persistence indices are calculated on the basis of a standard dynamic multimedia environmental model for various representative cases involving chemicals of particular interest.     

Nutrient mitigation in a temporary river basin

We estimate the nutrient budget in a temporary Mediterranean river basin. We use field monitoring and modelling tools to estimate nutrient sources and transfer in both high and low flow conditions. Inverse modelling by the help of PHREEQC model validated the hypothesis of a losing stream during the dry period. Soil and Water Assessment Tool model captured the water quality of the basin. The ‘total daily maximum load’ approach is used to estimate the nutrient flux status by flow class, indicating that almost 60 % of the river network fails to meet nitrogen criteria and 50 % phosphate criteria. We recommend that existing well-documented remediation measures such as reforestation of the riparian area or composting of food process biosolids should be implemented to achieve load reduction in close conjunction with social needs.     

From chemical risk assessment to environmental resources management: the challenge for mining

On top of significant improvements and progress made through science and engineering in the last century to increase efficiency and reduce impacts of mining to the environment, risk assessment has an important role to play in further reducing such impacts and preventing and mitigating risks. This paper reflects on how risk assessment can improve planning, monitoring and management in mining and mineral processing operations focusing on the importance of better understanding source–pathway–receptor linkages for all stages of mining. However, in light of the ever-growing consumption and demand for raw materials from mining, the need to manage environmental resources more sustainably is becoming increasingly important. The paper therefore assesses how mining can form an integral part of wider sustainable resources management, with the need for re-assessing the potential of mining in the context of sustainable management of natural capital, and with a renewed focus on its the role from a systems perspective. The need for understanding demand and pressure on resources, followed by appropriate pricing that is inclusive of all environmental costs, with new opportunities for mining in the wastes we generate, is also discussed. Findings demonstrate the need for a life cycle perspective in closing the loop between mining, production, consumption and waste generation as the way forward.     

GIS-based modelling for the estimation of municipal solid waste generation and collection

In the present paper, an innovative model for the estimation of municipal solid waste generation and collection is proposed. This model is part of an extended solid waste management system and uses a spatial Geodatabase, integrated in a GIS environment. It takes into consideration several parameters of waste generation, such as population density, commercial activities, road characteristics and their influence on the location and allocation of waste bins. Ground-based analysis was applied for the estimation of the inter-relations between the aforementioned factors and the variations in waste generation between residential and commercial areas. Therefore, the proposed model follows a unified categorization approach for residential and commercial activities and focuses on the dominant factors that determine waste generation in the area under study. The most important result of the research work presented in the current paper is an accurate estimation of the optimal number of waste bins and their allocation. A new methodology and an appropriate algorithm have been developed for this purpose in order to facilitate routing and waste collection. By using these results, municipalities aware of social, economical and environmental factors, related to waste management, can achieve optimal usage of their resources and offer the best possible services to their citizens.     

Monitoring priority substances of directives 76/464/EEC and 2000/60/EC in Greek water bodies

The priority substances of List I, 76/464/EEC Directive, some of which belong to the new Water Framework Directive 2000/60/EC, have been monitored in the surface waters of Greece through the developed network of 53 sampling stations. The analytical methods used for the determination of these substances included Purge and Trap-Gas chromatography-Mass spectrometry for volatile and semivolatile organic compounds, Gas Chromatography-Electron Capture Detection for organochlorine insecticides, High Performance Liquid Chromatography for pentachlorophenol and Atomic Absorption Spectrometry for metals. The results have shown the presence of several priority substances in Greek surface waters, in most cases at concentrations well below the regulatory limits. However, non-compliance was observed for a limited number of compounds. The monitoring network and the analytical determinations have to be expanded to more water bodies and more priority substances, in order to safeguard the quality of Greek surface waters.     

MODELING FRAMEWORK FOR MANAGING COPPER RUNOFF IN URBAN WATERSHEDS1

ABSTRACT: A modeling framework was developed for managing copper runoff in urban watersheds that incorporates water quality characterization, watershed land use areas, hydrologic data, a statistical simulator, a biotic ligand binding model to characterize acute toxicity, and a statistical method for setting a watershed specific copper loading. The modeling framework is driven by export coefficients derived from water quality parameters and hydrologic inputs measured in an urban watershed's storm water system. This framework was applied to a watershed containing a copper roof built in 1992. A series of simulations was run to predict the change in receiving stream water chemistry caused by roof aging and to determine the maximum copper loading (at the 99 percent confidence level) a watershed could accept without causing acute toxicity in the receiving stream. Forecasting the amount of copper flux responsible for exceeding the assimilation capacity of a watershed can be directly related to maximum copper loadings responsible for causing toxicity in the receiving streams. The framework developed in this study can be used to evaluate copper utilization in urban watersheds.