Aerobic biodegradation of organotin compounds in activated sludge batch reactors

The biodegradation behavior of four organotin (OT) compounds, namely tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT) and triphenyltin (TPhT), was studied in lab-scale activated sludge batch reactors. The activated sludge was spiked with the OT compounds at a level of 100 microg l(-1) as Sn. Determination of the OT compounds by GC-FPD after ethylation in the dissolved and particulate phase revealed that 24 h after the start of the experiments, almost the total of OT compounds has been removed from the dissolved phase and is associated with the suspended solids. Calculation of mass balance in batch reactors showed that OT compounds biodegradation was performed via a sequential dealkylation process. Removals due to biodegradation were differentiated according to the parent compound. In experiments with non-acclimatized biomass, a percentage of 27.1, 8.3, 73.8 and 51.3 was still present as TBT, DBT, MBT and TPhT, respectively, at the end of the experiment (18th day). Half-lives (t1/2) of 10.2 and 5.1 days were calculated for TBT and DBT, respectively, whereas apparent t1/2 values could not be determined for MBT and TPhT (t1/2>18 days). The capacity of activated sludge to biodegrade OT compounds in the absence of supplemental substrate indicated that these compounds can be metabolized as single sources of carbon and energy in activated sludge systems. Excluding TBT, the presence of low concentrations of supplemental substrate did not affect the biodegradation potential of activated sludge. The acclimatization of biomass on OT compounds enhanced significantly biodegradation, resulting in significant decreases of half-lives of OT compounds. As a result in the presence of acclimatized biomass, half-lives of 1.4, 3.6, 9.8 and 5.0 days were calculated for TBT, DBT, MBT and TPhT, respectively.     

Influence of soil inorganic amendments on heavy metal accumulation by leafy vegetables

Environmental Science and Pollution Research - The present study aims to assess the effect of four inorganic soil amendments, such as lime (CaCO3), red mud consisting of 75% hematite (Fe2O3),...     

Safety certification requirements for domestic robots

Domestic robotics is a growing sector with the potential for a large number of commercial applications. Robotics technologies have been successfully applied in industrial production lines, yet, for them to be successful in a dynamic household environment the need for increased reliability, robustness and other special capabilities become paramount. We are not far from the time when people will live and interact with robots and, thus, safety becoming the fundamental issue to observe. Robot designers should produce safe products for humans no matter what failure, malfunction or mishandle may occur. Thus, respective safety procedures ought to be applied to domestic robots as well. The most critical challenge is to preserve safety of humans without forfeiting a single token of the efficiency required to perform any task. In this technical communication, the authors address the need for safety regulations in domestic robotics and, while they do not intend to replace any current robot safety standards or guidelines, the proposed work may serve as a supplement to the standards. Since specific safety standards for domestic robots are not available, we propose that their safety verification should be carried out on the base of well-applied standards that developed in other areas and discussed here. The communication in hand provides the ground upon which a standard on domestic robots can be built. Moreover, it proposes a systemic approach that explicitly relates the system and user requirements to a list of safety problems, in order to achieve an adequate level of safety in domestic robotics.     

Chemical Characterization of Emissions from Vegetable Oil Processing and Their Contribution to Aerosol Mass Using the Organic Molecular Markers Approach

ABSTRACT

The organic fraction of aerosol emitted from a vegetable oil processing plant was studied to investigate the contribution of emissions to ambient particles in the surrounding area. Solvent-soluble particulate organic compounds emitted from the plant accounted for 10% of total suspended particles. This percentage was lower in the receptor sites (less than 6% of total aerosol mass). Nonpolar, moderate polar, polar, and acidic compounds were detected in both emitted and ambient aerosol samples. The processing and combustion of olive pits yielded a source with strong biogenic characteristics, such as the high values of the carbon preference index (CPI) for all compound classes. Polycyclic aromatic hydrocarbons (PAHs) detected in emissions were associated with both olive pits and diesel combustion. The chromatographic profile of dimethyl-phenanthrenes (DMPs) was characteristic of olive pit combustion. Organic aerosols collected in two receptor sites provided a different pattern.

The significant contribution of vehicular emissions was identified by CPI values (~1) of n-alkanes and the presence of the unresolved complex mixture (UCM). In addition, PAH concentration diagnostic ratios indicated that emissions from catalyst and noncatalyst automobiles and heavy trucks were significant. The strong even-to-odd predominance of n-alkanols, n-alkanoic acids, and their salts indicated the contribution of a source with biogenic characteristics. However, the profile of DMPs at receptor sites was similar to that observed for diesel particulates. These differences indicated that the contribution of vegetable oil processing emissions to the atmosphere was negligible.     

Metals removal from aqueous solution by iron-based bonding agents

GOAL AND SCOPE AND BACKGROUND: The application of a promising method, termed sorptive flotation, for the removal of chromium(VI) and zinc ions was the aim of the present paper. A special case of sorptive flotation is adsorbing colloid flotation. Suitable sorbent preparation techniques have been developed in the laboratory. METHODS: Sorptive flotation, consisting of the sorption and flotation processes combined in series, has proved to give fast and satisfactory treatment of the industrial streams and effluents bearing dilute aqueous solutions of zinc and chromium(VI). RESULTS AND DISCUSSION: Goethite has proved to be effective for the removal of chromium(VI) and zinc ions. Also, adsorbing colloid flotation with ferric hydroxide (as the co-precipitant) could be an alternative method to the above-mentioned separation of metal ions. In both cases, chromium(VI) (pH=4) and zinc (pH=7) removal was about 100%. CONCLUSION: The reasons for selecting the iron-based bonding materials, like goethite and/or in-situ produced ferric hydroxide, are that they are cheap, easily synthesized, suitable both for cation and anion sorption, and, furthermore, that they present low risks for adding a further pollutant to the system. Promising results were obtained. RECOMMENDATION AND OUTLOOK: The application of goethite and in-situ produced ferric hydroxide has demonstrated their effectiveness in the removal of heavy metal ions, such as chromium anions and zinc cations. A proposed continuation of current work is the utilization of similar iron oxides, for instance synthesized akaganeite. The comparison between the results reported in this paper with the results reported in the literature, also deserves attention.     

The potential for aeration of MSW landfills to accelerate completion

Landfilling is a popular waste disposal method, but, as it is practised currently, it is fundamentally unsustainable. The low short-term financial costs belie the potential long-term environmental costs, and traditional landfill sites require long-term management in order to mitigate any possible environmental damage. Old landfill sites might require aftercare for decades or even centuries, and in some cases remediation may be necessary. Biological stabilisation of a landfill is the key issue; completion criteria provide a yardstick by which the success of any new technology may be measured. In order for a site to achieve completion it must pose no risk to human health or the environment, meaning that attenuation of any emissions from the site must occur within the local environment without causing harm. Remediation of old landfill sites by aerating the waste has been undertaken in Germany, the United States, Italy and The Netherlands, with considerable success. At a pilot scale, aeration has also been used in newly emplaced waste to accelerate stabilisation. This paper reviews the use of aerobic landfill worldwide, and assesses the ways in which the use of aerobic landfill techniques can decrease the risks associated with current landfill practices, making landfill a more sustainable waste disposal option. It focuses on assessing ways to utilise aeration to enhance stabilisation. The results demonstrated that aeration of old landfill sites may be an efficient and cost-effective method of remediation and allow the date of completion to be brought forward by decades. Similarly, aeration of newly emplaced waste can be effective in enhancing degradation, assisting with completion and reducing environmental risks. However, further research is required to establish what procedure for adding air to a landfill would be most suitable for the UK and to investigate new risks that may arise, such as the possible emission of non-methane organic compounds.     

Inference and model determination for temperature-driven non-linear ecological models

Environmental and Ecological Statistics - This paper is concerned with a contemporary Bayesian approach to the effect of temperature on developmental rates. We develop statistical methods using...     

A study on the environmental degradation of pesticides azinphos methyl and parathion methyl

The effect of environmental parameters (temperature and relative humidity) on the degradation rate of azinphos methyl and parathion methyl was studied. Proprietary emulsifiable concentrates were diluted and added to each of 90 glass Petri dishes for each pesticide and were left overnight to dry. Petri dishes were placed in 18 air-tight containers (9 for each pesticide) in which were created environments with relative humidity (RH) of 60, 82, and 96%. The containers were stored at 0, 20, and 40 degrees C. From the experimental results best fit curves, kinetic equations, rate constants, and half-lives were calculated. Half-lives of azinphos methyl for the RH studied were, from 124 to 267 days at 0 degrees C, from 89 to 231 days at 20 degrees C, and from 25 to 71 days at 40 degrees C. Corresponding half-lives for parathion methyl were from 48 to 57 days at 0 degrees C, from 9.2 to 10.5 days at 20 degrees C and from 1.3 to 1.5 days at 40 degrees C. The results were correlated with relevant results from the decomposition of the same or similar pesticides on apples both, on the trees and during refrigerated storage. These correlations are suggesting that biological factors strongly affected the decomposition rate of azinphos methyl. On the contrary the decomposition of parathion methyl was mainly affected by environmental rather than biological factors.     

Investigation of Cr(VI) reduction in continuous-flow activated sludge systems

The aim of this research was to investigate hexavalent chromium, Cr(VI), reduction by activated sludge and to evaluate the use of continuous-flow activated sludge systems for the treatment of Cr(VI)-containing wastewater. Three series of experiments were conducted using two parallel lab-scale activated sludge systems. During the first experiment, one system was used as a control, while the other received Cr(VI) concentrations equal to 0.5, 1, 3 and 5mg l(-1). For all concentrations added, approximately 40% of the added Cr(VI) was removed during the activated sludge process. Determination of chromium species in the dissolved and particulate phase revealed that the removed Cr(VI) was sorbed by the activated sludge flocs mainly as trivalent chromium, Cr(III), while the residual chromium in the dissolved phase was mainly detected as Cr(VI). Activated sludge ability to reduce Cr(VI) was independent of the acclimatization of biomass to Cr(VI) and it was not affected by the toxic effect of Cr(VI) on autotrophic and heterotrophic microorganisms. During the second experiment, both systems were operated under two different hydraulic residence time (theta equal to 20 and 28h) and three different initial organic substrate concentration (COD equal to 300, 150 and 0mg l(-1)). Cr(VI) reduction was favored by an increase of theta, while it was limited by influent COD concentration. Finally, at the last experiment the effect of anoxic and anaerobic reactors on Cr(VI) reduction was investigated. It was observed that the use of an anoxic zone or an anaerobic-anoxic zone ahead of the aerobic reactor favored Cr(VI) reduction, increasing mean percentage Cr(VI) reduction to almost 80%.     

Comparative environmental assessment of biocides used in antifouling paints

In response to increasing scientific evidence on the toxicity and persistence of organotin residues from antifouling paints in the aquatic environment, the use of triorganotin antifouling products was banned on boats of less than 25 m length in many countries during 1987. Alternatives to tributyltin (TBT) paint are mainly copper based coatings containing organic booster biocides to improve the efficacy of the formulation, and have been utilised on small boats for the last 10 years. With policies encouraging a total ban on TBT, it is expected that these biocides will be used to a greater extent in the future. Limited data and information are available on the environmental occurrence, fate, toxicity, and persistence of these biocides, and thus any decisions on policies regulating antifoulants cannot be fully informed. In this study, a multicriteria comparison of alternative biocides, based on a general assessment of available information in the literature, provided support for the use of the precautionary principle with respect to policies on antifouling products. This assessment was validated by a more detailed comparison of four selected biocides and TBT. Results indicate that TCMS pyridine and TCMTB demonstrate environmental characteristics similar to TBT and thus detail risk assessments are needed before their use is permitted. The widespread use of the other biocides should be allowed only after research to fill the gaps in knowledge with respect to their toxicity and persistence in aquatic environments.