Carbon-14 transfer into rice plants from a continuous atmospheric source: observations and model predictions

Carbon-14 ((14)C) is one of the most important radionuclides from the perspective of dose estimation due to the nuclear fuel cycle. Ten years of monitoring data on (14)C in airborne emissions, in atmospheric CO(2) and in rice grain collected around the Tokai reprocessing plant (TRP) showed an insignificant radiological effect of the TRP-derived (14)C on the public, but suggested a minor contribution of the TRP-derived (14)C to atmospheric (14)C concentrations, and an influence on (14)C concentrations in rice grain at harvest. This paper also summarizes a modelling exercise (the so-called rice scenario of the IAEA's EMRAS program) in which (14)C concentrations in air and rice predicted with various models using information on (14)C discharge rates, meteorological conditions and so on were compared with observed concentrations. The modelling results showed that simple Gaussian plume models with different assumptions predict monthly averaged (14)C concentrations in air well, even for near-field receptors, and also that specific activity and dynamic models were equally good for the prediction of inter-annual changes in (14)C concentrations in rice grain. The scenario, however, offered little opportunity for comparing the predictive capabilities of these two types of models because the scenario involved a near-chronic release to the atmosphere. A scenario based on an episodic release and short-term, time-dependent observations is needed to establish the overall confidence in the predictions of environmental (14)C models.     

Adsorption of 2,4-dichlorophenoxyacetic acid by an Andosol

To identify the important soil components involved in 2,4-dichlorophenoxyacetic acid (2,4-D) adsorption on Andosols, 2,4-D adsorption on a surface horizon of an Andosol was compared with that on hydrogen peroxide (H2O2)-treated (soil organic matter [SOM] was removed), acid-oxalate (OX)-treated (active metal hydroxides and SOM were removed), and dithionite-citrate-bicarbonate (DCB)-treated (free and active metal [hydr]oxides and SOM were removed) soil samples at equilibrium pHs ranging from 4 to 8. Although the untreated soil contained a large amount of organic C (71.9 g kg-1), removal of SOM had little effect on 2,4-D adsorption. Active surface hydroxyls, which were attached to the active and free metal (hydr)oxides and metal SOM complexes, were identified as the most important soil functional group for 2,4-D adsorption. The dominant mechanism of the 2,4-D adsorption was a ligand exchange reaction in which the carboxylic group of 2,4-D displaced the active surface hydroxyl associated with metals and formed a strong coordination bond between the 2,4-D molecule and soil solid phase. The ligand exchange reaction reasonably accounted for the selective adsorption of 2,4-D over Cl-, competitive adsorption of phosphate over 2,4-D, reduction in plant-growth-inhibitory activity of soil-adsorbed 2,4-D, and the high 2,4-D adsorption ability of Andosols. Although a humic acid purified from the soil did not adsorb 2,4-D, the presence of the humic acid increased 2,4-D adsorption on Al and Fe, probably by inhibiting the hydrolysis and polymerization of Al and Fe resulting in the preservation of available adsorption sites on these metals. The adsorption behavior of 2,4-D on soils could be a good index for predicting the adsorption behavior of other organic acids in soils.     

Determination of 99Tc deposited on the ground within the 30-km zone around the Chernobyl reactor and estimation of 99Tc released into atmosphere by the accident

Technetium-99 was determined in samples from the 30-km zone around the Chernobyl reactor. Concentrations of ⁹⁹Tc in soil samples taken from three forest sites ranged from 1.1 to 14.1 Bq kg⁻¹ dry weight for the organic soil layers, and from 0.13 to 0.83 Bq kg⁻¹ dry weight for the mineral soil layers. In particular, for the organic layers, the measured ⁹⁹Tc concentrations were one or two orders of magnitude higher than those due to global fallout ⁹⁹Tc. The ⁹⁹Tc depositions (Bq m⁻²), based on the sum of the depositions measured in organic and mineral layers, ranged from 130 Bq m⁻² within the 10-km zone to about 20 Bq m⁻² close to the border of the 30-km zone. Taking the corresponding measured ¹³⁷Cs depositions into account, it was found that the activity ratio of ⁹⁹TW/¹³⁷Cs ranged from 6 × 10⁻⁵ to 1.2 × 10⁻⁴. It was estimated that about 970 GBq of ⁹⁹Tc had been released by the Chernobyl accident. This figure corresponded to 2%–3% of the total ⁹⁹Tc inventory in the core.     

A survey of indoor workplace radon concentration in Japan

Radon ((222)Rn) concentration was measured at indoor workplaces in Japan to estimate effective dose to the public from (222)Rn and its progeny. Measurements were made from 2000 to 2003 at 705 sites in four categories of office, factory, school and hospital. Passive type Rn monitors equipped with two sheets of polycarbonate thin films for measuring radon concentrations were installed at observation sites and replaced every 3 months to observe seasonal variations in (222)Rn concentrations. The range of annual mean (222)Rn concentrations for all sites was 1.4-182 Bq m(-3), with the arithmetic mean and standard deviation were 20.8 and 19.5 Bq m(-3). Annual mean (222)Rn concentration observed at office, factory, school and hospital were 22.6, 10.1, 28.4 and 19.8 Bq m(-3), respectively. Seasonal variations in (222)Rn concentrations at offices, schools and hospitals were similar to those found in dwellings, and variations in factories were similar to those found in outdoor environments. (222)Rn concentration observed in every quarter period was found to decrease as follows: school>office>hospital>factory. The average effective dose to the public due to (222)Rn was estimated to be 0.41 mSv y(-1) weighted by the working population. Considering the (222)Rn exposure in indoor workplaces, effective dose to the general public is estimated to be in the range from approximately 0.42 to 0.52 mSv y(-1).     

The effect of predation risk on post-copulatory sexual selection in the Japanese pygmy squid

Behavioral Ecology and Sociobiology - The pace-of-life syndrome (POLS) hypothesis predicts that behavior and physiology covary with life history. Evidence for such covariation is contradictory,...     

Concentrations of organotin compounds in sediment and clams collected from coastal areas in Vietnam

Levels of butyltin (BT) and phenyltin (PT) compounds were determined in sediments and clam Meretrix spp. collected from north and central coastal areas in Vietnam. Concentrations of TBT in sediments ranged from 0.89 to 34 ng g(-1) dry wt and those in clams ranged from 1.4 to 56 ng g(-1) wet wt. The levels of TBT in sediments and clams from Vietnam were within limits reported from other countries. Further, the TBT level in clams was lower than the tolerable average residue level (TARL) estimated based on tolerable daily intake (TDI). Trace amounts of PTs were also found in both sediment and clam samples. In sediments from north and central Vietnam, the concentrations of TBT were highest in the order of Hue (28 ng g(-1) dry wt), Cua Luc (15 ng g(-1) dry wt), Sam Son (6.3 ng g(-1) dry wt), and Tra Co (5.5 ng g(-1) dry wt). Among the clams from north and central Vietnam, the levels of TBT in clams from Cua Luc were dramatically high at 47 ng g(-1) wet wt. TBT formed the principal butyltin species in sediment at all sites studied. The ratios of TBT in sediment were higher among BT compounds at all study sites. Of total BTs, TBT was the dominant species in clams from almost all sites studied. In spatial distribution, TPT showed a pattern similar to TBT, suggesting the use of TPT as an antifouling paint. The partition coefficient between sediment and calms was calculated. The partition coefficients of TBT and TPT were 2.01 (0.56-5.5) and 9.23 (3.1-20), respectively. These results show that sediment-bound TBT is a source of contamination to clams in addition to dissolved TBT.     

Multi-agent traffic simulations to estimate the impact of automated technologies on safety

Abstract

Objective: The objective of this article was to develop a multi-agent traffic simulation methodology to estimate the potential road safety improvements of automated vehicle technologies.

Methods: We developed a computer program that merges road infrastructure data with a large number of vehicles, drivers, and pedestrians. Human errors are induced by modeling inattention, aimless driving, insufficient safety confirmation, misjudgment, and inadequate operation. The program was applied to simulate traffic in a prescribed area in Tsukuba city. First, a 100% manual driving scenario was set to simulate traffic for a total preset vehicle travel distance. The crashes from this simulation were compared with real-world crash data from the prescribed area from 2012 to 2017. Thereafter, 4 additional scenarios of increasing levels of automation penetration (including combinations of automated emergency braking [AEB], lane departure warning [LDW], and SAE Level 4 functions) were implemented to estimate their impact on safety.

Results: Under manual driving, the system simulated a total of 859 crashes including single-car lane departure, car-to-car, and car-to-pedestrian crashes. These crashes tended to occur in locations similar to real-world crashes. The number of crashes predicted decreased to 156 cases with increasing level of automation. All of the technologies considered contributed to the decrease in crashes. Crash reductions attributable to AEB and LDW in the simulations were comparable to those reported in recent field studies. For the highest levels of automation, no assessment data were available and hence the results should be carefully treated. Further, in modeling automated functions, potentially negative aspects such as sensing failure or human overreliance were not incorporated.

Conclusions: We developed a multi-agent traffic simulation methodology to estimate the effect of different automated vehicle technologies on safety. The crash locations resulting from simulations of manual driving within a limited area in Japan were preliminary assessed by comparison with real-world crash data collected in the same area. Increasing penetration levels of AEB and LDW led to a large reduction in both the frequency and severity of rear-end crashes, followed by car-to-car head-on crashes and single-vehicle lane departure crashes. Preliminary estimations of the potential safety improvements that may be achieved with highly automated driving technologies were also obtained.     

Enzyme activities of marine bacteria involved in Laminaria-thallus decomposition and the resulting sugar release

The extracellular decomposing enzyme activities of marine bacteria, including 60 and 16 strains of Laminaria-thallus decomposing bacteria (LDB) and non-LDB, respectively, were determined against several algal polysaccharides. A number of LDB decomposed alginate, fucoidan, and cellulose, but not laminarin. Clear decomposing activity was not observed in the culture supernatant from nutrient broth, but was detected in that from a Laminaria-thallus medium, suggesting that decomposing enzymes were induced. During the incubation of LDB in Laminaria-thallus medium, depolymerized sugar materials with a wide range of molecular size were released into the culture fluid. Total sugars released into the culture fluid after 4 d of incubation amounted to a maximum of 95% of the initial content in the thallus tissues. These findings suggest that microbial decomposition of Laminaria thallus in sea water could be a good source of carbohydrates which may support the heterotrophic growth of marine organisms.     

An assessment of selected trace elements in intertidal surface sediments collected from the Peninsular Malaysia

Concentrations of 11 trace elements (V, Cr, Co, Ni, Cu, Zn, As, Ag, Cd, Pb, and U) were determined in the intertidal surface sediments of Peninsular Malaysia. The average trace element concentrations are ranked as follows: Zn>V>As>Cr>Pb>Cu>Ni>Co>U>g>Cd. Interim Sediment Quality Guidelines (ISQGs) employed in present study are the Australia and New Zealand joint guideline (ANZECC/ARMCANZ), and the Hong Kong authorities. From the pooled data, none of these trace elements have the average concentration above the ISQG-high values. However, As and Ag average concentrations were over the ISQG-low values. Some elements were found to have the average concentration above the ISQG-high and/or ISQG-low in certain locations, including Kampung Pasir Putih (JPP), Lumut Port (ALP), Kuala Perai (PKP), Port Dickson (NPD), and others. The lowest and highest concentrations in a specific sampling location and maritime area varied among the elements, variations that were greatly affected by natural and anthropogenic activities in a given area. For each trace element, there were various levels of concentration among the sampling locations and maritime areas. These patterns indicated pollutant sources of an element for each area perhaps derived from nearby areas and did not widely distributed to other locations. It is necessary for Malaysia to develop an ISQG for effective quick screening and evaluation of the coastal environment of Peninsular Malaysia.