CEN Standards for Testing and Certifying Personal Protective Equipment—Status Quo and Deficiencies: Examples

By establishing the internal market, the European Union intended to create an area in which safety and health at work are guaranteed. For this purpose, a series of directives was passed.

The EC Directive 89/686/EEC “Approximation of the laws of the Member States relating to personal protective equipment” is of particular interest to the manufacturers of personal protective equipment (PPE). On the European level, harmonized standards, that put these basic health and safety requirements into more concrete terms have to be available. The European Standardizing Committee (CEN) is charged with the elaboration of European standards.

A total of 176 standards relating to personal protective equipment have to be setup; 57 of them are available at present. All CEN members are obliged to transpose them without modification into national standards. Formerly existing national standards have to be withdrawn.

Existing European standards sometimes show deficiencies regarding the specification of requirements according to Directive 89/686/EEC: the standardization of PPE for special fields of application and insufficient harmonization of provisions for different PPE serving the same protective purpose. Test methods are not always described precisely enough.     

Global population collapse in a superabundant migratory bird and illegal trapping in China

Persecution and overexploitation by humans are major causes of species extinctions. Rare species, often confined to small geographic ranges, are usually at highest risk, whereas extinctions of superabundant species with very large ranges are rare. The Yellow‐breasted Bunting (Emberiza aureola) used to be one of the most abundant songbirds of the Palearctic, with a very large breeding range stretching from Scandinavia to the Russian Far East. Anecdotal information about rapid population declines across the range caused concern about unsustainable trapping along the species’ migration routes. We conducted a literature review and used long‐term monitoring data from across the species’ range to model population trend and geographical patterns of extinction. The population declined by 84.3–94.7% between 1980 and 2013, and the species’ range contracted by 5000 km. Quantitative evidence from police raids suggested rampant illegal trapping of the species along its East Asian flyway in China. A population model simulating an initial harvest level of 2% of the population, and an annual increase of 0.2% during the monitoring period produced a population trajectory that matched the observed decline. We suggest that trapping strongly contributed to the decline because the consumption of Yellow‐breasted Bunting and other songbirds has increased as a result of economic growth and prosperity in East Asia. The magnitude and speed of the decline is unprecedented among birds with a comparable range size, with the exception of the Passenger Pigeon (Ectopistes migratorius), which went extinct in 1914 due to industrial‐scale hunting. Our results demonstrate the urgent need for an improved monitoring of common and widespread species’ populations, and consumption levels throughout East Asia.     

Anoxic gas recirculation system for fouling control in anoxic membrane reactor

Anoxic gas recirculation system was applied to control the membrane fouling in pilot-scale 4-stage anoxic membrane bioreactor(MBR). In the anaerobic-anoxic-anoxic-aerobic flow scheme,hydrophilic polytetrafluoroethylene(PTFE) membrane(0.2 μm, 7.2 m2/module) was submerged in the second anoxic zone. During 8 months operation, the average flux of the membrane was 21.3L/(m2·hr). Chemical cleaning of the membrane was conducted only once with sodium hydroxide and sodium hypochlorite. Dissolved oxygen(DO) concentration in the second anoxic zone was maintained with an average of 0.19 ± 0.05 mg/L. Gas chromatography analysis showed that the headspace gas in the second anoxic reactor was mainly consisted of N2(93.0% ± 2.5%), O2(3.8% ± 0.6%), and CO2(3.0% ± 0.5%), where the saturation DO concentration in liquid phase was 1.57 mg/L. Atmospheric O2 content(20.5% ± 0.8%) was significantly reduced in the anoxic gas. The average pH in the reactor was 7.2 ± 0.4. As a result, the recirculation of the anoxic gas was successfully applied to control the membrane fouling in the anoxic MBR.     

Structural effect of the in situ generated titania on its ability to oxidize and capture the gas-phase elemental mercury

Structural effect of the in situ generated TiO(2) sorbent particle was examined for its ability to capture elemental mercury under UV irradiation in a simulated combustion flue gas. Titania particles were prepared by thermal gas-phase oxidation of Titanium (IV) isopropoxide (TTIP) using a high temperature electric furnace reactor. The structural characteristics of the in situ generated TiO(2) at various synthesis temperatures were investigated; size distribution and the geometric mean diameter were measured using a scanning mobility particle sizer, while fractal dimension and radius of gyration were evaluated from the transmission electron microscopy images. Results from the Hg(0) capture experiment show that with increasing titania synthesis temperature, the overall aggregate size increases and the morphology becomes more open-structured to gas-phase Hg(0) and UV light, resulting in the improved mercury removal capability.     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

Modification of Aliphatic Polyesters and Their Reactive Blends with Starch

Modified polycaprolactone was synthesized by melt reaction of PCL and reactive monomers such as glycidyl methacrylate (GMA) and maleic anhydride (MAH) in the presence of benzoyl peroxide in Brabender mixer. MAH showed a different grafting phenomenon compared to GMA. The reaction mechanism was discussed with different reactive monomers. Reactive blends of the PCL-g-GMA and the gelatinized starch with glycerin were prepared and their mechanical properties and biodegradabilities were investigated. Reactive blends of PCL-g-GMA and starch showed well-dispersed starch domain in the matrix and better mechanical strength than the unmodified PCL/starch blend. However, the reaction between PCL-g-GMA and starch induced a crosslinking during the reactive blending and this crosslinking in the blend lowered the biodegradation of the blend during the composting test. The biodegradability was investigated by the weight loss and surface morphology change of the blend in the composting medium.     

Thio arsenosugars in freshwater mussels from the Danube in Hungary

In contrast to the large body of data on naturally-occurring arsenic compounds in marine organisms, relatively little is known about arsenic speciation in freshwater biota. We report an investigation using HPLC-ICPMS into the arsenic compounds in five species of freshwater mussels collected from five sites from the Danube in Hungary. Total arsenic concentrations in the mussels ranged from 3.8-12.8 mg As kg(-1). The arsenic speciation patterns were broadly similar for mussels representing each of the five species and five sites, but quite different from those reported for marine mussels. The major extractable arsenicals were two oxo arsenosugars (glycerol sugar and phosphate sugar), and their thio analogues (thio glycerol sugar and thio phosphate sugar). Arsenobetaine, usually the major arsenical in marine organisms, was not a significant compound in the freshwater mussels and was detected in only three of the 11 samples. This is the first report of thio arsenosugars in freshwater biota and suggests that these compounds may be common and widespread naturally-occurring arsenicals.