Memory effect on the dioxin emissions from municipal waste incinerator in Taiwan

Evaluation of the dioxin removal efficiency of the air pollution control device (APCD) at an existing municipal waste incinerator (MWI) located in Taiwan is conducted via stack sampling and analysis. The MWI investigated is equipped with cyclones, dry lime scrubbing systems and fabric filters as APCDs. Results indicate that the patterns of dioxin isomers at APCDs' inlet and stack are similar. During the first year of carbon injection, the concentrations of emitted dioxin decreased greatly. The dioxin removal efficiency increased from 26.9% to 96.6% after injecting 115 kg/day activated carbon (AC). At the second year, the dioxin removal efficiency reaches 98.7% after injecting the same rate of AC continuously. The lower efficiency achieved with activated carbon injection (ACI) during the first year can be attributed to the memory effect, i.e. the dioxin or precursor desorbs slowly to the flue gas and increases the dioxin concentration at stack, resulting in a lower dioxin removal efficiency than expected.     

A study on the characteristics of silt loading on paved roads in the Seoul metropolitan area using a mobile monitoring system

This study is considered the first attempt to apply a mobile monitoring system to estimating silt loading on paved roads in a megacity such as the Seoul metropolitan area. Using a mobile monitoring system developed in 2005, we estimated silt loadings on representative paved roads in the Seoul metropolitan area, including the city of Incheon, over a period of 3 yr. The temporal and spatial characteristics of silt loading were investigated for the carefully selected roads that may reflect the characteristics of the cities of Seoul and Incheon. In this study, changes in the average silt loading values were investigated in terms of land use, the temporal resolution of data acquisition (i.e., seasonal, daily, three-hour scale), the road width or number of lanes, and rainfall, which may affect the characteristics of the average silt loading significantly. It was found that the advantages of using the mobile monitoring system are its ability to obtain a large quantity of silt loading data in a short period of time and over a wide area and its ability to create a silt loading map showing the relative magnitude of silt loading in relation to a specific location, which makes it possible to easily locate hot spots.     

Insecticide residues in cotton soils of Burkina Faso and effects of insecticides on fluctuating asymmetry in honey bees (Apis mellifera Linnaeus)

Four insecticides (acetamiprid, cypermethrin, endosulfan and profenofos) are used quarterly in the cotton-growing areas of Burkina Faso, West Africa. These insecticides were investigated in soils collected from traditionally cultivated and new cotton areas. Also, the effects of insecticide exposure on the developmental instability of honey bees, Apis mellifera, were explored. In soil samples collected three months after insecticide treatments, endosulfan and profenofos concentrations varied in the range of 10-30 μg kg(-1) in the traditionally cultivated zones and 10-80 μg kg(-1) in the new cotton zones, indicating a pollution of agricultural lands. However, only profenofos concentrations were significantly higher in the new cotton zone than the traditionally cultivated zones. In addition, the index of fluctuating asymmetry, FA1, in the length of second tarsus (L(HW)) was increased for bees when exposed to pesticide treated cotton fields for 82d, and their FA levels were significantly higher than those in the control colony in an orchard. The other studied traits of bees exposed to insecticides were not significantly different from controls. Our results indicate that FA may be considered as a biomarker reflecting the stress induced by insecticide treatments. However, the relationship between FA and stressors needs further investigations.     

Temporal trend (1988-2008) of hexabromocyclododecane enantiomers in herring gull eggs from the German coastal region

Levels of α-, β-, and γ-hexabromocyclododecane (HBCD) were determined in pooled eggs from herring gulls (Larus argentatus) sampled on three bird sanctuaries near the German North Sea coast between 1988 and 2008 (Mellum and Trischen) and the German Baltic Sea coast between 1998 and 2008 (Heuwiese) and archived by the German Environmental Specimen Bank. Pressurized fluid extraction, gel permeation chromatography, and LC-MS/MS using ¹³C₁₂-labelled isotope standards and a chiral column were applied. α-HBCD was the dominating diastereomer and ranged between 3.7 and 107 ng g⁻¹ lw while β- and γ-HBCD were throughout close to LOQ. The highest α-HBCD concentration was found in eggs from Mellum sampled in the year 2000. Interestingly, HBCD in eggs from the three islands displayed similar time courses with levels increasing to a peak contamination around 2000 and decreasing levels ever since. Chiral signatures of α-HBCD in eggs differed among the islands but indicated a preferential enrichment of the first eluting enantiomer (−)-α-HBCD.     

Crystal structure of δ-isobutoxypentabromo-cyclododecanes, kinetics and selectivity of their isomerization during thermal treatment of flame-proofed polystyrenes

Hexabromocyclododecanes (HBCDs) are persistent organic pollutants now ubiquitous in the environment. Technical HBCD mixtures and with it flame-proofed polystyrenes (FP-PS) also contain isobutoxypentabromocyclododecanes (iBPBCDs) as minor constituents, which are possibly released together with HBCDs. So far, eight diastereomeric pairs of enantiomers named as α-, β-, γ-, δ-, ?-, ξ-, η-, and θ-iBPBCDs with proportions of 10%, 5%, 2%, 21%, 11%, 11%, 12% and 28% were found in technical HBCD. Herein the crystal structure of racemic δ-iBPBCD, the second most prominent diastereomer, is presented and assigned to (1S)-1-isobutoxy-(2R,5R,6S,9S,10S)-2,5,6,9,10-pentabromocyclododecane and its enantiomer. During thermal treatment of FP-PS, e.g. the production of extruded polystyrenes (XPS), proportions of δ-iBPBCDs decrease and those of other stereoisomers increase. Evidence was found that δ-iBPBCDs isomerize stereo- and regioselectively to β-iBPBCDs. Based on structural and kinetic data, a transformation mechanism was proposed. Apparent first-order rate constants (k_iso) of 0.0019, 0.0050, and 0.012 min⁻¹ are found for the δ- to β-iBPBCD isomerization at 120, 130, and 140 °C, respectively, corresponding to half-lives of 360, 140, and 56 min. These transformations also occur during the production of XPS, which predominantly contain β-iBPBCDs, whereas δ-iBPBCDs dominate in materials experiencing lower thermal stress, e.g. expanded polystyrenes (EPS). The relative configurations of δ- and θ-iBPBCDs are TtCtCt, like the one of γ-HBCDs. γ-HBCDs are the kinetically and α-HBCDs with a TcCtCc configuration the thermodynamically favored products. In analogy, β-iBPBCDs are assumed to have a TcCtCc configuration like α-HBCDs because they are formed from δ-iBPBCDs under thermodynamic control. In conclusion, HBCD- and iBPBCD-patterns in flame-proofed polystyrenes vary substantially, reflecting the thermal stress these materials have experienced. When released to the environment, these patterns might further change, as observed for HBCDs.     

Economic water management decisions: trade-offs between conflicting objectives in the sub-middle region of the São Francisco watershed

Hydro-economic models can measure the economic effects of different reservoir operating rules, environmental restrictions, maintenance of ecosystems, technical constraints, institutional constraints, land use change, and climate change. To determine the optimal economic water allocation, for its main uses in the sub-middle of the São Francisco River Basin, a hydro-economic optimization model was developed and applied. Demand curves were used rather than fixed requirements for water resources. The results show that operation rules of reservoirs and institutional constraints, such as priorities for human consumption, have high impacts on costs and benefits of the principal economic uses in the study area. Especially, costs of environmental demands, like minimum ecological river flow, have high impacts on the water resource management. Scarcity costs of irrigation users associated with maintaining ecosystems and environmental constraints are particularly significant. The results from this study provide a better understanding of the water trade-offs for future policymaking and efficient water management. Policymaking for the water resources should consider the food-water-energy-environment nexus at a regional scale to minimize environmental and economic cost under water scarcity and land use change.     

Theoretical and experimental investigations of mercury adsorption on hematite surfaces

One of the biggest environmental concerns caused by coal-fired power plants is the emission of mercury (Hg), which is toxic metal. To control the emission of Hg from coal-derived flue gas, it is important to understand the behavior and speciation of Hg as well as the interaction between Hg and solid materials in the flue gas stream. In this study, atomic-scale theoretical investigations using density functional theory (DFT) were carried out in conjunction with laboratory-scale experimental studies to investigate the adsorption behavior of Hg on hematite (α-Fe₂O₃). According to the DFT simulation, the adsorption energy calculation proposes that Hg physisorbs to the α-Fe₂O₃(0001) surface with an adsorption energy of ?0.278 eV, and the subsequent Bader charge analysis confirms that Hg is slightly oxidized. In addition, Cl introduced to the Hg-adsorbed surface strengthens the Hg stability on the α-Fe₂O₃(0001) surface, as evidenced by a shortened Hg-surface equilibrium distance. The projected density of states (PDOS) analysis also suggests that Cl enhances the chemical bonding between the surface and the adsorbate, thereby increasing the adsorption strength. In summary, α-Fe₂O₃ has the ability to adsorb and oxidize Hg, and this reactivity is enhanced in the presence of Cl. For the laboratory-scale experiments, three types of α-Fe₂O₃ nanoparticles were prepared using the precursors Fe(NO₃)₃, Fe(ClO₄)₃, and FeCl₃, respectively. The particle shapes varied from diamond to irregular stepped and subrounded, and particle size ranged from 20 to 500 nm depending on the precursor used. The nanoparticles had the highest surface area (84.5 m²/g) due to their highly stepped surface morphology. Packed-bed reactor Hg exposure experiments resulted in this nanoparticles adsorbing more than 300 μg Hg/g. The Hg L_III-edge extended X-ray absorption fine structure spectroscopy also indicated that HgCl₂ physisorbed onto the α-Fe₂O₃ nanoparticles.

Implications: Atomic-scale theoretical simulations proposes that Hg physisorbs to the α-Fe₂O₃(0001) surface with an adsorption energy of ?0.278 eV, and the subsequent Bader charge analysis confirms that Hg is slightly oxidized. In addition, Cl introduced to the Hg-adsorbed surface strengthens the Hg stability on the α-Fe₂O₃(0001) surface, as evidenced by a shortened Hg-surface equilibrium distance. The PDOS analysis also suggests that Cl enhances the chemical bonding between the surface and the adsorbate, thereby increasing the adsorption strength. Following laboratory-scale experiment of Hg sorption also shows that HgCl₂ physisorbs onto α-Fe₂O₃ nanoparticles which have highly stepped structure.     

The Impact of Map and Data Resolution on the Determination of the Agricultural Utilisation of Organic Soils in Germany

Due to its nature, agricultural land use depends on local site characteristics such as production potential, costs and external effects. To assess the relevance of the modifying areal unit problem (MAUP), we investigated as to how a change in the data resolution regarding both soil and land use data influences the results obtained for different land use indicators. For the assessment we use the example of the greenhouse gas (GHG) emissions from agriculturally used organic soils (mainly fens and bogs). Although less than 5 % of the German agricultural area in use is located on organic soils, the drainage of these areas to enable their agricultural utilization causes roughly 37 % of the GHG emissions of the German agricultural sector. The abandonment of the cultivation and rewetting of organic soils would be an effective policy to reduce national GHG emissions. To assess the abatement costs, it is essential to know which commodities, and at what quantities, are actually produced on this land. Furthermore, in order to limit windfall profits, information on the differences of the profitability among farms are needed. However, high-resolution data regarding land use and soil characteristics are often not available, and their generation is costly or the access is strictly limited because of legal constraints. Therefore, in this paper, we analyse how indicators for land use on organic soils respond to changes in the spatial aggregation of the data. In Germany, organic soils are predominantly used for forage cropping. Marked differences between the various regions of Germany are apparent with respect to the dynamics and the intensity of land use. Data resolution mainly impairs the derived extent of agriculturally used peatland and the observed intensity gradient, while its impact on the average value for the investigated set of land-use indicators is generally minor.     

Impacts of climate change on surface water quality in relation to drinking water production

Besides climate change impacts on water availability and hydrological risks, the consequences on water quality is just beginning to be studied. This review aims at proposing a synthesis of the most recent existing interdisciplinary literature on the topic. After a short presentation about the role of the main factors (warming and consequences of extreme events) explaining climate change effects on water quality, the focus will be on two main points. First, the impacts on water quality of resources (rivers and lakes) modifying parameters values (physico-chemical parameters, micropollutants and biological parameters) are considered. Then, the expected impacts on drinking water production and quality of supplied water are discussed. The main conclusion which can be drawn is that a degradation trend of drinking water quality in the context of climate change leads to an increase of at risk situations related to potential health impact.     

Aryl hydrocarbon receptor-mediated activity of atmospheric particulate matter from an urban and a rural site in Switzerland

Atmospheric particulate matter (PM) is an air-suspended mixture of solid and liquid particles that vary in size, shape, and chemical composition. Long-term exposure to elevated concentrations of fine atmospheric particles is considered to pose a health threat to humans and animals. In this context, it has been hypothesized that toxic chemicals such as polycyclic aromatic hydrocarbons (PAHs) play an important role. Some PAHs are known to be carcinogenic and it has been shown that carcinogenic effects of PAHs are mediated by the aryl hydrocarbon receptor (AhR). In this study, PM1 was collected at a rural and an urban traffic site during an intense winter smog period, in which concentration of PM1 often exceeded 50 μg m^?3. We applied an in vitro reporter gene assay (DR-CALUX) to detect and quantify PM1-associated chemicals that induce AhR-mediated gene expression. This activity was expressed as CALUX equivalents of 2,3,7,8-tetrachlorodibenzodioxin (PM-TCDD-CEQs). In addition, concentrations of PAHs in the PM1 extracts were determined using gas chromatography/high-resolution mass spectrometry. Concentrations of PM-TCDD-CEQs ranged from 10 to 85 pg m^?3 and from 19 to 87 pg m^?3 at the urban and rural site, respectively. By the use of known relative potency factors, the measured concentration of a PAH was converted into a PAH-TCDD-CEQ concentration. ΣPAH-TCDD-CEQ and PM-TCDD-CEQ were highly correlated at both sites (r² = 0.90 and 0.69). The calculated ΣPAH-TCDD-CEQs explain between 2% and 20% of the measured PM-TCDD-CEQs. Benzo[k]fluoranthene was the most important PAH causing approximately 60% of the total ΣPAH-TCDD-CEQ activity. In contrast to NO, CO, PM10, and PM1, the concentration of PM-TCDD-CEQs showed no significant difference between the two sites. No indications were found that road traffic emissions caused elevated concentrations of PM-TCDD-CEQs at the urban traffic site.