Effects of SO<Subscript>2</Subscript> contamination on rising CO<Subscript>2</Subscript> drops under high pressure

Although the flow dynamics of pure liquid drops in other liquids has been well researched, little attention has been paid to the impacts of impurities. Hence, most of research is not directly applicable to the real world. To address this gap, we conducted numerical experiments simulating the rise of pure and contaminated drops. It was selected to study liquid CO₂ drops contaminated with SO₂ under high pressure because such mixtures mimic potential scenarios in which drops may leak from carbon capture and storage (CCS) facilities or pipelines. First, numerical simulation experiments were performed to validate our method by comparing our results with previous research on pure drops. Second, the validated numerical approach was applied to simulations of contaminated drops to investigate how contaminants affect rising drops. The results show that the SO₂ contamination caused changes in deformation, breakup phenomena, rising velocities, surrounding flow fields and drag coefficients. Most importantly, the contamination resulted in the formation of smaller “child drops”; such breakup is not observed in pure CO₂ drops. The formation of child drops in turn affects the streamlines, patterns and areas of wakes behind the contaminated drops. The addition of contaminants also enhances the dissolution rate, which is affected by the contaminant concentration and by the flow dynamics of the rising drop. Our results would improve understanding the rise of impure CO₂ drops, such as drops potentially leaked by future CCS operations.     

Decline in extractable antibiotics in manure-based composts during composting

A wide variety of antibiotics have been detected in natural water samples and this is of potential concern because of the adverse environmental effects of such antibiotic residues. One of the main sources of antibiotics effluence to the surrounding environment is livestock manures which often contain elevated concentrations of veterinary antibiotics (VAs) which survive digestion in the animal stomach following application in animal husbandry practices. In Korea, livestock manures are normally used for compost production indicating that there is potential for antibiotic release to the environment through compost application to agricultural lands. Therefore, reduction of the amount of VAs in composts is crucial. The purpose of this study was to understand the influence of the composting process and the components of the compost on the levels of three common classes of antibiotics (tetracyclines, sulfonamides, and macrolides). Composted materials at different stages of composting were collected from compost manufacturing plants and the variation in antibiotic concentrations was determined. Three different antibiotics, chlortetracycline (CTC), sulfamethazine (SMZ), and tylosin (TYL) at three different concentrations (2, 10, and 20 mg kg⁻¹) were also applied to a mixture of pig manure and sawdust and the mixtures incubated using a laboratory scale composting apparatus to monitor the changes in antibiotic concentrations during composting together with the physicochemical properties of the composts. During composting, in both field and lab-scale investigations, the concentrations of all three different antibiotics declined below the relevant Korean guideline values (0.8 mg kg⁻¹ for tetracyclines, 0.2 mg kg⁻¹ for sulfonamides and 1.0 mg kg⁻¹ for macrolides). The decline of tetracycline and sulfonamide concentrations was highly dependent on the presence of sawdust while there was no influence of sawdust on TYL decline.     

Effects of Heating Season on Residential Indoor and Outdoor Polycyclic Aromatic Hydrocarbons, Black Carbon, and Particulate Matter in an Urban Birth Cohort

Exposure to air pollutants has been associated with adverse health effects. However, analyses of the effects of season and ambient parameters such as ozone have not been fully conducted. Residential indoor and outdoor air levels of polycyclic aromatic hydrocarbons (PAH), black carbon (measured as absorption coefficient [Abs]), and fine particulate matter <2.5 μm (PM)(2.5) were measured over two-weeks in a cohort of 5-6 year old children (n=334) living in New York City's Northern Manhattan and the Bronx between October 2005 and April 2010. The objectives were to: 1) characterize seasonal changes in indoor and outdoor levels and indoor/outdoor (I/O) ratios of PAH (gas + particulate phase; dichotomized into Σ(8)PAH(semivolatile) (MW 178-206), and Σ(8)PAH(nonvolatile) (MW 228-278)), Abs, and PM(2.5); and 2) assess the relationship between PAH and ozone. Results showed that heating compared to nonheating season was associated with greater Σ(8)PAH(nonvolatile) (p<0.001) and Abs (p<0.05), and lower levels of Σ(8)PAH(semivolatile) (p<0.001). In addition, the heating season was associated with lower I/O ratios of Σ(8)PAH(nonvolatile) and higher I/O ratios of Σ(8)PAH(semivolatile) (p<0.001) compared to the nonheating season. In outdoor air, Σ(8)PAH(nonvolatile) was correlated negatively with community-wide ozone concentration (p<0.001). Seasonal changes in emission sources, air exchanges, meteorological conditions and photochemical/chemical degradation reactions are discussed in relationship to the observed seasonal trends.     

Assessment of characteristic distribution of PCDD/Fs and BFRs in sludge generated at municipal and industrial wastewater treatment plants

The presence of polychlorinated dibenzo-p-dioxins and furan (PCDD/Fs) and brominated flame retardants (BFRs) in sludge generated at municipal wastewater treatment plants (MWTPs) and industrial wastewater treatment plants (IWTPs) was investigated. The concentrations of these pollutants were in the following ranges: 5.38-7947 ng kg⁻¹ dw (0.02-49.9 ng WHO-TEQ kg⁻¹ dw) for 17 PCDD/Fs, 17.5-66 761 μg kg⁻¹ dw for 27 polybrominated diphenyl ethers (PBDEs), 1.55-29 604 μg kg⁻¹ dw for hexabromocyclododecanes (HBCDs) (α-, β-, and γ-diastereomers), and 4.01-618 μg kg⁻¹ dw for tetrabromobisphenol A (TBBPA). Generally, the levels of each compound in the sewage-sludge samples were higher than those in the industrial-sludge samples with some exceptions. The characteristic distribution profiles of target compounds were observed for different types of sludge and different sources of wastewater. High-chlorinated PCDD/Fs were dominant in all samples except those from the textile industry. The distribution of the BFRs in industrial-sludge samples varied, whereas that of the BFRs in sewage-sludge samples was consistent. The proportion of penta-BDEs in sewage sludge was higher than that in industrial sludge, even though BDE-209 was the most dominant congener in all the samples. For HBCDs, the distribution of diastereomers (α-, β-, and γ-HBCD) was similar across sludge samples that had the same source of wastewater and treatment processes.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

The status of flood wastes treatment and future tasks in South Korea

Natural disasters such as typhoon, flood, and heavy rainfall cause damage in South Korea every year during the summer season. After each rainy season, South Korea suffers not only from flood wastes but also from debris that pile up at dams and stagnate at the estuary of the river. Thus, it is very important to handle these types of wastes as quickly as possible to recover from flood damages and to prevent environmental contamination such as offensive odor and water contamination by the leachate from flood wastes. Other countries such as Japan or USA have established and implemented regulations and guidelines for flood waste. Note, however, that South Korea did not establish practical guidelines; hence, the urgency of establishing practical measures for flood waste. In this study, we suggested various ways of making environmentally sound guidelines including the method of reducing the amount of flood waste by environmentally sound treatment process for flood waste, and the method of setting up and operating the temporary storage site for purposes of efficient separation and treatment of flood waste.     

Monitoring of heavy metal contaminants using feathers of shorebirds, Korea

This study presents concentrations of iron, zinc, copper, lead and cadmium in the feathers of 3 shorebird species (n = 29) from Okgu Mudflat, Korea in the East Asian-Australian Migration Flyways. Lead concentrations (ANOVA, p < 0.001) in Red-necked Stints (geomean = 9.61 μg g(-1) dry weight) were higher than in Terek Sandpipers (geomean = 5.56 μg g(-1) dry weight) which in turn were higher than in Great Knots (geomean = 2.78 μg g(-1) wet weight). Cadmium concentrations (ANOVA, p < 0.001) were higher in Great Knots (geomean = 2.97 μg g(-1) wet weight) and in Red-necked Stints (geomean = 2.70 μg g(-1) dry weight) than in Terek Sandpipers (geomean = 0.33 μg g(-1) dry weight). Lead (r = 0.574, p < 0.01) and cadmium (r = 0.380, p < 0.05) concentrations between feathers and livers of shorebirds were significantly correlated. Lead concentrations in 65.5% (19 individuals) of shorebirds exceeded a toxicity threshold for feathers (4 μg g(-1) dry weight). Iron, zinc, copper, lead and cadmium concentrations in feathers were within the range of earlier studies for wild birds, but lead concentrations in Red-necked Stints were higher than those reported in other studies. Because lead concentrations in feathers and livers of Red-necked Stints were markedly higher than in other shorebirds, we suggest that Red-necked Stints were exposed to higher lead concentrations than the other shorebirds on their breeding or wintering grounds.     

Determination of micropollutants in combined sewer overflows and their removal in a wastewater treatment plant (Seoul,South Korea)

The present study investigated the occurrence of 29 selected micropollutants such as endocrine disrupting compounds (EDCs) and pharmaceuticals and personal care products (PPCPs) in surface waters and wastewaters in Seoul (South Korea) during both dry and wet weather conditions. The study area was selected based on the lack of available information regarding the suspected contamination of rivers/creeks by EDCs and PPCPs in the Seoul region and the presence of a wastewater treatment plant (WWTP), which serves approximately 4.1 million inhabitants and has a design capacity of 1,297?×?10³ m³/day. Many target compounds (83 %) were detected in samples collected from wastewater treatment influent/effluent, creek water, and combined sewer overflow (CSO). The total EDC/PPCP concentrations were as follows: WWTP influent (69,903 ng/L)?>?WWTP effluent (50,175 ng/L) >3 creek samples (16,035–44,446 ng/L) during dry weather, and WWTP influent (53,795 ng/L)?>?WWTP bypass (38,653 ng/L) >5 creek samples (15,260–29,113 ng/L) >2 CSO samples (11,109–11,498 ng/L) during wet weather. EDCs and PPCPs were found to be present at high daily loads (65.1 and 69.8 kg/day during dry and wet weather, respectively) in the WWTP effluent. Compound removal by the WWTP varied significantly by compound: caffeine, diclofenac, ibuprofen, naproxen, and propylparaben (>90 %), and acesulfame, DEET, iohexol, iopromide, and iopamidol (<5 %). These findings and literature information support the hypothesis that the efficiency of removal of EDCs and PPCPs is strongly dependent on both removal mechanism (e.g., biodegradation, adsorption to sludge, and oxidation by chlorine) and compound physicochemical properties (e.g., pK _a and hydrophobicity).     

Optimal conditions for three brood chronic toxicity test method using a freshwater macroinvertebrate <Emphasis Type="Italic">Moina macrocopa</Emphasis>

Freshwater cladocera such as Daphnia magna and Ceriodaphnia dubia have been used extensively for freshwater toxicity test worldwide. However, these species may not be indigenous in certain geographical regions, which restrict the utility of these organisms as test species. In the present study, we investigated optimal culture and test conditions for an indigenous freshwater macroinvertebrate of Korea, Moina macrocopa. The culture conditions that were evaluated included water temperature (20°C and 25°C), rearing media (moderately hard water or MHW, with or without selenium supplementation, or Elendt M4), and food density (2.5 × 10⁷ and 5 × 10⁷ cells/mL of Selenastrum capricornutum), and their effects on the life history characteristics of M. macrocopa were determined. Population growth rate of M. macrocopa was maximized at 25°C with 5 × 10⁷ cells/mL of algal food density in MHW. A series of chronic three brood reference toxicant tests were conducted under the ideal culture conditions that were identified here, and the results of the tests indicated reliable reproducibility of the test protocol. Optimal culture and test conditions that were identified for M. macrocopa in the present study are suggested for evaluation of chronic toxicity of chemicals and industrial or municipal discharge.     

Perspirable skin: Thermal buckling achieved by complex functionally graded materials

A perspirable skin is a new design concept of thermal protection system that will autonomously reduce the surface temperature in many applications such as reentry and hypersonic vehicles. A unique design features an assembly of tiles, which buckles upon heating. Potentially, a large gap can be generated through this buckling action. These tiles will be assembled and shrink-fitted within an opening on the existing skin. To induce the buckling action, each tile needs to have a unique CTE variation, which causes thermal expansion radially and thermal shrinkage tangentially. This paper concentrates on the fabrication of these tiles made of complex functionally graded materials (FGMs), and presents our effort to design and fabricate these tiles.